Composition dependence of the structural chemistry and magnetism of Ca2.5Sr0.5(Ga,Co)1+xMn2−xO8

Polycrystalline samples of bilayered brownmillerite-like Ca_2.5Sr_0.5GaCo_0.15Mn_1.85O₈ and Ca_2.5Sr_0.5Ga_1.2Mn_1.8O₈ have been prepared and characterised by magnetometry and neutron diffraction over a wide temperature range. The structural chemistry and magnetic properties are compared to those of Ca_2.5Sr_0.5GaMn₂O₈. Ga enrichment has a significant effect on the former but not on the latter, whereas changes in both occur when paramagnetic Co³⁺ cations enter the parent phase on the 4-coordinate sites. The coupling between the environment around the 4-coordinate cations and the transition to an antiferromagnetic ordered state that was observed in Ca_2.5Sr_0.5GaMn₂O₈ is not apparent in the cation-substituted compositions, although both show long-range antiferromagnetic order at low temperatures.     

Methode calorimetrique de mesure des enthalpies de formation des alliages liquides a forte tension de vapeur

The heat effects corresponding to the dissolution of solid PbSe in liquid Pb-Se alloys starting from pure Pb were measured with a direct reaction calorimeter. The partial enthalpy of formation of PbSe in the melt and the integral enthalpy of formation of the Pb-PbSe system in the liquid state referred the liquid Pb and PbSe were deduced. Then, from a very simple change of reference state, and in the knowledge of the enthalpy of PbSe, the integral enthalpy of formation of Pb-Se liquid alloys with reference to pure liquid components could be derived. The results agreed very well with those obtained previously on the dissolution of Se in Pb. The method used can be applied whenever the component to be added to the bath has a high vapor pressure.

---

Zusammenfassung Die bei der Überführung von festem PbSe in flüssige Pb-Se-Legierungen auftretenden Wärmeeffekte wurden mittels direkter Reaktionskalorimetrie bestimmt. Die auf flüssiges Pb und PbSe bezogene partielle Bildungsenthalpie des Pb-PbSe-Systems im flüssigen Zustand wurde ermittelt. Durch eine geringfügige Veränderung des Referenzzustandes konnte bei Kenntnis der Enthalpie von PbSe die integrale Bildungsenthalpie von flüssigen Pb-Se-Legierungen in Bezug auf die reinen Komponenten abgeleitet werden. Die Ergebnisse stimmen gut mit denen überein, die früher für die Auflösung von Se in Pb erhalten wurden. Die Methode ist anwendbar, wenn dem Bade zuzugebende Komponenten einen hohen Dampfdruck haben.

---

Pb-Se Pb-Se, . Pb-Se Pb-PbSe Pb Pb-Se. PbSe, Pb-Se . , . , .

     

Fluorescence study of the sol-gel process in hybrid precursors: evidence of concentration fluctuations at the local scale

Hybrid sol-gel materials have been prepared by hydrolytic polycondensation of an alkoxysilane. The sol-gel process of methacryloxypropyltrimethoxysilane (MAPTMS) has been followed by fluorescence spectroscopy with 2-naphthol as a probe. The experimental results showed that this photoprobe was dramatically sensitive to the microenvironment polarity. Spectroscopic studies revealed fluctuations of the maximum emission intensity and wavelength as a function of time. These fluctuations were attributed to the amphiphilic behavior of the hydrolyzed precursor. The maximum emission wavelength of the probe corresponding to its protonated form was higher than in pure water. All the results suggest that the presence of water molecules, tightly bonded to the polar head of the silanols, increased locally the sol polarity and induced a red-shifted emission. Fluorescence spectroscopy emphasized the reversibility of monomeric silanol aggregates and the changes in hydroxy group number of the silica network during the sol maturation. The behavior of this system upon shaking confirmed this statement.     

Design of organic semiconductors: tuning the electronic properties of pi-conjugated oligothiophenes with the 3,4-ethylenedioxythiophene (EDOT) building block

Hybrid oligothiophenes based on a various combinations of thiophene and 3,4-ethylenedioxythiophene (EDOT) groups have been synthesized. UV/Vis absorption spectra show that the number and relative positions of the EDOT groups considerably affect the width of the HOMO-LUMO gap and the rigidity of the conjugated system. Analysis of the crystallographic structure of two hybrid quaterthiophenes confirms that insertion of two adjacent EDOT units in the middle of the molecule leads to a self-rigidification of the conjugated systems by intramolecular SO interactions. Cyclic voltammetry data shows that the first oxidation potential of the oligomers decreases with increasing chain length and increasing number of EDOT groups for a given chain length. Electrochemical studies and theoretical calculations show that the positions of the EDOT units in the conjugated chain control the potential difference (DeltaE(p)) between the first and second oxidation steps. Moving the EDOT groups from the outer to the inner positions of the conjugated system increases DeltaE(p). Theoretical calculations confirm that this phenomenon reflects an increase of the intramolecular coulombic repulsion between positive charges in the dication. A thin-film field-effect transistor was fabricated by vacuum sublimation of a pentamer with alternating thiophene-EDOT structure, and the hole mobility was determined.     

Attempts at stepwise reduction of the carbon-nitrogen triple bond of a nitrile at two metal centres: study of the reactivity of [(CO)(PPh3)2Re( (μ-NCHPh)Ru(PPh3) 2(PhCN)] towards tetrafluoroboric acid and dihydrogen

The reaction of [(CO)PPh₃)₂Re(μ-H)₂(μ-NCHPh)Ru(PPh₃)₂(PhCN)] (2) with HBF₄-Me₂O generates [(CO)PPh₃)₂Re(μ- H)₂(μ,η¹,η²HNCHPh)Ru(PPh₃)₂(PhCN)][BF₄] (3). Monitoring the reaction by NMR spectroscopy shows the intermediate formation of [(CO)(PPh₃)₂ HRe(μ-H)₂(μ-NCHPh)Ru(PPh₃)₂(PhCN)][BF₄] (4). Attempted reduction of the imine ligand by a nucleophile (H⁻ or CN⁻) failed, regenerating 2. Under dihydrogen at 50 atm, 3 is slowly transformed into [(CO)(PPh₃)₂HRe(μ-H)₃Ru(PPh₃)₂(PhCN)][BF₄] (5) with liberation of benzyl amine.     

Investigations on the use of pneumatic cross-flow nebulizers with dual solution loading including the correction of matrix effects in elemental determinations by inductively coupled plasma optical emission spectrometry

The use of a so-called trihedral and a T-shaped cross-flow pneumatic nebulizer with dual solution loading for inductively coupled plasma optical emission spectrometry has been studied. By these devices analyte clouds from two solutions can be mixed during the aerosol generation step. For both nebulizers the correction of matrix effects using internal standardization and standard addition calibration in an on-line way was investigated and compared to elemental determinations using a conventional cross-flow nebulizer and calibration with synthetic standard solutions without matrix matching. A significant improvement of accuracy, both for calibration with internal standardization and standard addition, was obtained in the case of four synthetic solutions containing each 40 mmol L^− 1 Na, K, Rb and Ba as matrix elements and 300 μg L^− 1 Cd, Co, Cr, Cu, Fe, Mn, Ni and Pb as analytes. Calibration by standard addition in the case of dual solution loading has been shown to be very useful in the determination of elements at minor and trace levels in steel and alumina reference materials. The results of analysis for minor concentrations of Cr, Cu and Ni in steel as well as for Ca, Fe, Ga, Li, Mg, Mn, Na, Si and Zn in alumina powder certified reference materials subsequent to sample dissolution were found to be in good agreement with the certificates. Limits of detection were found to be only slightly above those for a conventional cross-flow nebulizer and a precision better than 3% was realized with both novel nebulizers.     

Supramolecular cluster catalysis: facts and problems

By checking the chemistry underlying the concept of “supramolecular cluster catalysis” we identified two major errors in our publications related to this topic, which are essentially due to contamination problems. (1) The conversion of the “closed” cluster cation [H₃Ru₃(C₆H₆)(C₆Me₆)₂(O)]⁺ (1) into the “open” cluster cation [H₂Ru₃(C₆H₆)(C₆Me₆)₂(O)(OH)]⁺ (2), which we had ascribed to a reaction with water in the presence of ethylbenzene is simply an oxidation reaction which occurs in the presence of air. (2) The higher catalytic activity observed with ethylbenzene, which we had erroneously attributed to the “open” cluster cation [H₂Ru₃(C₆H₆)(C₆Me₆)₂(O)(OH)]⁺ (2), was due to the formation of RuO₂ · nH₂O, caused by a hydroperoxide contamination present in ethylbenzene.     

Magnesium substitution in Nd0.7Sr0.3MnO3

Magnesium substitution in Nd_0.7Sr_0.3MnO₃ has been studied by neutron powder diffraction. Polycrystalline samples of nominal compositions Nd_0.7Sr_0.3Mn_1−yMg_yO₃ with y=0.0, 0.1, 0.2 and 0.3 were synthesized by the standard solid-state reaction method. Rietveld refinements of the neutron powder diffraction data showed that all samples had distorted perovskite structure of orthorhombic symmetry. Mg initially preferred to substitute for Nd and only at Mg concentration greater than 0.1, a substantial substitution for Mn occurred. Our study also showed that Mg-substitution did not change the crystal structure of Nd_0.7Sr_0.3MnO₃.     

Bond dissociation energies for radical dimers derived from highly stabilized carbon-centered radicals

[reaction: see text] The temperature dependence of the dissociation of dimers formed from highly stabilized carbon-centered radicals has been examined. Analysis of the data yields the bond dissociation energy (BDE) for the central head-to-head C-C bond in these compounds. For example, for the dimer derived from 3-phenyl-2-coumaranone, BDE is 23.6 kcal/mol and the C-C bond length 1.596 A, a rather long value for a sigma bond.     

Influence de la structure sur l'hydrolyse des N-pyrrolylmethylene-2 anilines

Hydrolysis of the imine function of a series of Schiff bases derived from pyrrole-2-carboxaldehyde and substituted anilines (X = H, p-OCH₃, p-OC₂H₅, p-CH₃, p-Cl, p-Br, m-CN, m-NO₂, p-NO₂) was studied in all of the pH ranges. The hydrolysis curves log k_abs (mn^?1) = f(pH) were established in buffered aqueous methanol by polarography or amperometry. The shapes of the curves obtained for pH > 5 indicates that N-pyrrolylmethylene-2 anilines hydrolyse according to the same mechanism as N-benzylidene anilines. The particular stability of these products for pH < 5 permits one to obtain complete hydrolysis curves in acid media. A very good Hammett correlation (k_obs = + 1,73) has been established from the maxima which appear for strong acidity. This stability is interpreted as due to the specific electron-donating effect of the pyrrole nucleus. The influence of the structural parameter X on the morphology of the curves log k_abs = f(pH) and on the hydrolysis mechanism of the imine function is discussed in all of the pH ranges.