Simulation of the electronic and vibrational structure of hydrogenated amorphous silicon using cluster models

A set of simple models of hydrogenated amorphous silicon (a-Si:H) consisting of hypothetical silane molecules with diamond or similar lattices was studied by the semiempirical AM1 method. Densities of states and infrared spectra were calculated for the silane molecules and similar molecules with dangling bonds disorder, and with boron or phosphorus substitution to simulate doping. Some examples are presented, and a comparison is made with experimental properties of a-Si:H. It is proposed to use these models in a study of the Staebler–Wronski photodegradation of a-Si:H and other aspects of amorphous silicon technology. © John Wiley & Sons, Inc.     

Two types of intramolecular addition of an Al-N multiple-bonded monomer LAlNAr' arising from the reaction of LAl with N3Ar' (L = HC[(CMe)(NAr)]2, Ar' = 2,6-Ar2C6H3, Ar = 2,6-iPr2C6H3)

The reaction of beta-diketiminated aluminum(I) monomer LAl with a large bulky azide N3Ar' (L = HC(CMeNAr)2, Ar' = 2,6-Ar2C6H3, Ar = 2,6-iPr2C6H3) in the temperature range from -78 degrees C to room temperature affords two different isomers 2 and 3, which have been characterized by spectroscopic and X-ray structural analyses, as well as elemental analysis. The variable-temperature 1H NMR kinetic studies of this reaction indicate the existence of the monomer LAlNAr' (1) at low temperature and the thermal stability of the compounds increases in the order of 1 < 2 < 3.     

Access to the structures of fluoromagnesium compounds: synthesis and structural characterization of the β-diketiminato magnesium fluoride [{CH(CMeNAr)2}Mg(μ-F)(THF)]2·toluene

β-Diketiminato magnesium fluoride [{CH(CMeNAr)₂}Mg(μ-F)(THF)]₂·toluene (Ar=2,6-i-Pr₂C₆H₃, 2·toluene) was synthesized. The molecular structure of 2 revealed for the first time, the double fluoro bridge feature between the two magnesium atoms with a typical MgF bond length (average 1.95 Å).     

Parametrization of multiply differential cross sections

Multiply differential cross sections for two- and three-electron escape are parametrised in terms of generalised tensorial asymmetry parameters. The analysis is based exclusivly on rotational invariance as an exact symmetry for the experimental set up. No approximate assumptions are made on the correlated dynamics of many- electron systems. Results are valid for any atomic and molecular target. The new parameters may be used to describe experimental and theoretical data in a compact way, but also to link e.g. coincidence and non-coincidence measurements with each other.     

Dimethylformamide as a carbon monoxide source in fast palladium-catalyzed aminocarbonylations of aryl bromides

Dimethylformamide (DMF) acts as an efficient source of carbon monoxide and dimethylamine in the palladium-catalyzed aminocarbonylation (Heck carbonylation) of p-tolyl bromide to provide the dimethylamide. Addition of amines to the reaction mixture in excess delivers the corresponding aryl amides in good yields. The amines employed, benzylamine, morpholine, and aniline, all constitute good reaction partners. The reaction proceeds smoothly with bromobenzene and more electron-rich aryl bromides, but electron-deficient aryl bromides fail to undergo aminocarbonylation. The reactions are conducted at 180-190 degrees C for 15-20 min with microwave heating in a reaction mixture containing imidazole and potassium tert-butoxide: the latter is required to promote decomposition of the DMF solvent at a suitable rate. The beneficial effects of controlled microwave irradiation as an energy source for the rapid heating of the carbonylation reaction mixture are demonstrated. The carbonylation procedure reported herein, which relies on the in situ generation of carbon monoxide, serves as a convenient alternative to other carbonylation methods and is particularly applicable to small-scale reactions where short reaction times are desired and the direct use of carbon monoxide gas is impractical.     

Speciation analysis — why and how?

Summary The different aspects of speciation analysis are reviewed. Species-specific instrumental techniques as well as various speciation schemes are considered for the determination of species of metals and metalloids, including organometallic compounds. The application of the methods are discussed in some detail for the analysis of natural waters, air, soil, sediment and biological samples. The relationship between metal species and bioavailability is also briefly dealt with.     

The fate of sulfur-bound hydrogen on formation of self-assembled thiol monolayers on gold: (1)H NMR spectroscopic evidence from solutions of gold clusters

It is demonstrated that thiols can adsorb to gold without losing hydrogen. Dodecyl sulfide-capped gold clusters have been prepared and subjected to ligand exchange reactions in perdeuterated benzene by addition of dodecanethiol and subsequently dodecyl disulfide. It is shown by 1H NMR spectroscopy that dodecanethiol molecules are readily taken up as ligands producing characteristic broad signals corresponding to the alpha-methylene and S-H protons, with chemical shifts close to those found for thiol in solution; these signals are absent in spectra of thiolate-capped clusters. Addition of excess disulfide to such clusters capped with both dialkyl sulfides and thiols leads to the appearance of sharp signals for free dialkyl sulfide and intact thiol. Amounts of thiols up to 50% of the ligand shell are, however, taken up by the clusters under rapid and irreversible loss of hydrogen.     

Thioacylation reactions for the surface functionalization of phosphorus-containing dendrimers

The functionalization of phosphorus-containing dendrimers was easily achieved through thioacylation reactions involving new dendrimers capped with dithioester end groups and various functionalized amines. These reactions were successfully applied to the first generation (12 end groups) and the third generation of the dendrimer (48 end groups) and allowed their functionalization by various primary or secondary amines, alcohols, glycols, and azides. [reaction: see text]     

CoSm(SeO3)2Cl,CuGd(SeO3)2Cl,MnSm(SeO3)2Cl,CuGd2(SeO3)4 und CuSm2(SeO3)4: Übergangsmetallhaltige Selenite von Samarium und Gadolinum

CoSm(SeO₃)₂Cl, CuGd(SeO₃)₂Cl, MnSm(SeO₃)₂Cl, CuGd₂(SeO₃)₄ and CuSm₂(SeO₃)₄: Transition Metal containing Selenites of Samarium and Gadolinum The reaction of CoCl₂, Sm₂O₃, and SeO₂ in evacuated silica ampoules lead to blue single crystals of CoSm(SeO₃)₂Cl (triclinic, , Z = 4, a = 712.3(1), b = 889.5(2), c = 1216.2(2) pm, α = 72.25(1)°, β = 71.27(1)°, γ = 72.08(1)°, R_all = 0.0586). If MnCl₂ is used in the reaction light pink single crystals of MnSm(SeO₃)₂Cl (triclinic, , Z = 2, a = 700.8(2), b = 724.1(2), c = 803.4(2) pm, α = 86.90(3)°, β = 71.57(3)°, γ = 64.33(3)°, R_all = 0.0875) are obtained. Green single crystals of CuGd₂(SeO₃)₂Cl (triclinic, , Z = 4, a = 704.3(4), b = 909.6(4), c = 1201.0(7) pm, α = 70.84(4)°, β = 73.01(4)°, γ = 70.69(4)°, R_all = 0.0450) form analogously in the reaction of CuCl₂ and Gd₂O₃ with SeO₂. CoSm(SeO₃)₂Cl contains [CoO₄Cl₂] octahedra, which are connected via one edge and one vertex to infinite chains. The Mn²⁺ ions in MnSm(SeO₃)₂Cl are also octahedrally coordinated by four oxygen and two chlorine ligands. The linkage of the polyhedra to chains occurs exclusively via edges. Both, the cobalt and the manganese compound show the Sm³⁺ ions in eight and ninefold coordination of oxygen atoms and chloride ions. In CuGd(SeO₃)₂Cl the Cu²⁺ ions are coordinated by three oxygen atoms and one Cl^— ion in a distorted square planar manner. One further Cl^— and one further oxygen ligand complete the [CuO₃Cl] units yielding significantly elongated octahedra. The latter are again connected to chains via two common edges. For the Gd³⁺ ions coordination numbers of ?8 + 1”? and nine were found. Single crystals of the deep blue selenites CuM₂(SeO₃)₄ (M = Sm/Gd, monoclinic, P2₁/c, a = 1050.4(3)/1051.0(2), b = 696.6(2)/693.5(1), c = 822.5(2)/818.5(2) pm, β = 110.48(2)°/110.53(2)°, R_all = 0.0341/0.0531) can be obtained from reactions of the oxides Sm₂O₃ and Gd₂O₃, respectively, with CuO and SeO₂. The crystal structure contains square planar [CuO₄] groups and irregular [MO₉] polyhedra.     

SNAr reactions of β-substituted porphyrins and the synthesis of meso substituted tetrabenzoporphyrins

Reaction of 2,3,7,8,12,13,17,18-octaethylporphyrin with LiR reagents containing functional groups readily yields meso substituted derivatives suitable for further transformations with residues such as -p-C₆H₅Br, -p-C₆H₅-CCH, -p-C₆H₅-NH₂ or -(CH₂)₃-CHCH₂. Similar reactions of tetrabenzoporphyrin with alkyllithium reagents afforded the first entry into meso mono- and dialkylsubstituted tetrabenzoporphyrins while reaction of bicyclo[2.2.2]oct-type masked isoindole precursors with LiR followed by in situ retro-Diels-Alder reaction also afforded the 5-phenyl and 5,10-diphenyltetrabenzoporphyrins in high purity.