A high‐resolution scheme for low Mach number flows

A method for computing low Mach number flows using high‐resolution interpolation and difference formulas, within the framework of the Marker and Cell (MAC) scheme, is presented. This increases the range of wavenumbers that are properly resolved on a given grid so that a sufficiently accurate solution can be obtained without extensive grid refinement. Results using this scheme are presented for three problems. The first is the two‐dimensional Taylor–Green flow which has a closed form solution. The second is the evolution of perturbations to constant‐density, plane channel flow for which linear stability solutions are known. The third is the oscillatory instability of a variable density plane jet. In this case, unless the sharp density gradients are resolved, the calculations would breakdown. Under‐resolved calculations gave solutions containing vortices which grew in place rather than being convected out. With the present scheme, regular oscillations of this instability were obtained and vortices were convected out regularly. Stable computations were possible over a wider range of sensitive parameters such as density ratio and co‐flow velocity ratio. Copyright © 2004 John Wiley Sons, Ltd.     

Viscoelastic properties of nanostructured natural rubber/polystyrene interpenetrating polymer networks

The effects of the blend ratio and initiating system on the viscoelastic properties of nanostructured natural rubber/polystyrene‐based interpenetrating polymer networks (IPNs) were investigated in the temperature range of ?80 to 150 °C. The studies were carried out at different frequencies (100, 50, 10, 1, and 0.1 Hz), and their effects on the damping and storage and loss moduli were analyzed. In all cases, tan δ and the storage and loss moduli showed two distinct transitions corresponding to natural rubber and polystyrene phases, which indicated that the system was not miscible on the molecular level. However, a slight inward shift was observed in the IPNs, with respect to the glass‐transition temperatures (T_g's) of the virgin polymers, showing a certain degree of miscibility or intermixing between the two phases. When the frequency increased from 0.1 to 100 Hz, the T_g values showed a positive shift in all cases. In a comparison of the three initiating systems (dicumyl peroxide, benzoyl peroxide, and azobisisobutyronitrile), the dicumyl peroxide system showed the highest modulus. The morphology of the IPNs was analyzed with transmission electron microscopy. The micrographs indicated that the system was nanostructured. An attempt was made to relate the viscoelastic behavior to the morphology of the IPNs. Various models, such as the series, parallel, Halpin–Tsai, Kerner, Coran, Takayanagi, and Davies models, were used to model the viscoelastic data. The area under the linear loss modulus curve was larger than that obtained by group contribution analysis; this showed that the damping was influenced by the phase morphology, dual‐phase continuity, and crosslinking of the phases. Finally, the homogeneity of the system was further evaluated with Cole–Cole analysis. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1680–1696, 2003     

Metal complexation of crosslinked polyacrylamide-supported dithiocarbamates: Effect of the molecular character and extent of crosslinking on complexation

Dithiocarbamate functions were incorporated into different polyacrylamide matrices crosslinked with a flexible and hydrophilic crosslinking agent, tetraethyleneglycol diacrylate (TEGDA), and their complexation behaviours were investigated. Crosslinked polyacrylamides with varying extents of the tetrafunctional TEGDA crosslinks were prepared by free radical solution polymerization at 60°C using potassium persulphate as initiator in ethanol. The dithiocarbamate functionality was incorporated into these polyacrylamides by a two-step polymer-analogous reaction involving (i)trans-amidation with ethylenediamine and (ii) dithiocarbamylation of the aminopolyacrylamide with carbon disulphide and alkali. The complexations of dithiocarbamate with Cu(II), Ni(II), Zn(II), Co(II) and Hg(II) ions were followed under different conditions. The metal ion intake varied with the extent of the crosslinking agent and the observed trend in complexation is Hg(II) > Cu(II)> Zn(II)> Co(II)> Ni (II). The time-course of complexation, the possibility of recycling, swelling characteristics, and spectral and thermal analyses were carried out. The thermal stability increases upon complexation with metal ions.     

Evaluation of piezoelectric PVDF polymers for use in space environments. III. Comparison of the effects of vacuum UV and gamma radiation

Films of piezoelectric PVDF and P(VDF‐TrFE) were exposed to vacuum UV (115–300 nm VUV) and γ‐radiation to investigate how these two forms of radiation affect the chemical, morphological, and piezoelectric properties of the polymers. The extent of crosslinking was almost identical in both polymers after γ‐irradiation, but surprisingly, was significantly higher for the TrFE copolymer after VUV‐irradiation. Changes in the melting behavior were also more significant in the TrFE copolymer after VUV‐irradiation due to both surface and bulk crosslinking, compared with only surface crosslinking for the PVDF films. The piezoelectric properties (measured using d₃₃ piezoelectric coefficients and D‐E hysteresis loops) were unchanged in the PVDF homopolymer, while the TrFE copolymer exhibited more narrow D‐E loops after exposure to either γ‐ or VUV‐radiation. The more severe damage to the TrFE copolymer in comparison with the PVDF homopolymer after VUV‐irradiation is explained by different energy deposition characteristics. The short wavelength, highly energetic photons are undoubtedly absorbed in the surface layers of both polymers, and we propose that while the longer wavelength components of the VUV‐radiation are absorbed by the bulk of the TrFE copolymer causing crosslinking, they are transmitted harmlessly in the PVDF homopolymer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3253–3264, 2006     

Spectrophotometric determination of ziram (dithiocarbamate fungicide) by thiocyanate and rhodamine 6G method

A sensitive spectrophotometric method has been developed for the determination of ziram in water, vegetables and grains. The method is based on the dissociation of dithiocarbamate complex of zinc with thiocyanate and rhodamine 6G at pH 4 to form a pink coloured complex that is stabilized by gelatin. The method is simple and Beer's law is obeyed over the concentration range of 0.05-1 ppm of ziram. The method is free from interference of similar dithiocarbamate fungicides containing Mn(2+) and Fe(3+) ions.     

Self-avoiding walks and trees in spread-out lattices

LetG _R be the graph obtained by joining all sites ofZ ^d which are separated by a distance of at mostR. Let (G _R ) denote the connective constant for counting the self-avoiding walks in this graph. Let (G _R ) denote the coprresponding constant for counting the trees embedded inG _R . Then asR, (G _R ) is asymptotic to the coordination numberk _R ofG _R , while (G _R ) is asymptotic toek _R. However, ifd is 1 or 2, then (G _R )-k _R diverges to –.Dedicated to Oliver Penrose on this occasion of his 65th birthday.     

Rapid separation of microgram amounts of metal ions on stannic antimonate ion-exchange paper

Summary Microgram amounts of metal ions have been separated using stannic antimonate paper. Most of the separations can be accomplished within 15 minutes.

---

Zusammenfassung Unter Verwendung von Zinn(IV)antimonat-Papier lassen sich Mikromengen zahlreicher Metallionen trennen. Die meisten Trennungen lassen sich innerhalb 15 min durchführen.

     

Determination of aluminium in bulk coal samples by neutron activation analysis

The determination of Al₂O₃, in bulk coal samples to an accuracy of about 0.2% Al₂O₃ has been achieved by means of a thermal-neutron activation technique based on the reaction ²⁷Al(n,γ)²⁸Al. In the analysed samples, which had widely different compositions, the Al₂O₃ concentrations ranged from 1 to 11% and the ash contents from 7 to 40%. Al₂O₃ concentrations measured by x-ray fluorescence showed a linear relationship with both the 1.78-MeV γ-ray count following the decay of ²⁸Al and the thermal-neutron count near the samples during irradiation. The linear relationship, which was obtained by regression analysis of the experimental data, determined the Al₂O₃concentrations with a standard deviation of 0.24% Al₂O₃. The particle sizes in the samples ranged from —0.5 to —40 mm, the moisture contents ranged from 1 to 6%, and the sample weights ranged from 8 to 11 kg. However, inclusion of these parameters in the regression analysis did not significantly improve the results for Al₂O₃.     

Nanosecond and picosecond laser flash photolysis studies of 2,2′-dinitrodiphenylmethanes

The transient absorption spectra of the 2,2′-dinitrodiphenylmethanes 1a–1c in solution were examined in the picosecond and nanosecond time ranges. The absorption bands, observed at 420–450 nm on 355 nm (18 ps) excitation of these compounds, were attributed to the nitronic acids 2a–2c, formed through the singlet-state- mediated intramolecular hydrogen abstraction and the triplet states of 1a–1c. Biradical intermediates, formed through the intramolecular abstraction of the benzylic hydrogen by the triplet excited state, were detected for 1a and 1b. Transient species produced following 355 nm (approximately 6 ns) pulse excitation of 1a–1c result in the formation of the corresponding nitronic acids 2a–2c, with absorption maxima around 415–430 nm. These nitronic acids are the precursors of the various products formed in the steady state irradiation of 1a–1c     

Solution of Some Structural Analysis Problems by Orthogonal Collocation

Abstract

Application of the method of orthogonal collocation to boundary value problems in structural and applied mechanics is investigated. Typical boundary value problems, such as the torsion of rectangular bars and the bending of plates, are employed as illustrative examples. Simplicity in application and good accuracy of orthogonal collocation are demonstrated by the solution of such complex problems as the large deflection analysis of rectangular isotropic, orthotropic, and sandwich plates. Results are compared wherever possible with existing solutions based on much more laborious and lengthy methods of computation. Excellent agreements are obtained.