LES study of diesel flame/wall interaction and mixing mechanisms at different wall distances

In this paper, the flame-wall interaction of reacting diesel spray under engine like conditions is investigated using large eddy simulations. The aim of this study is to understand the influence of the distance between the wall and the spray nozzle on the air entrainment rate, which is a key variable in formation/oxidation process of soot. Three experimental cases are investigated, a free jet case and two wall impingement cases with a distance from nozzle to wall of 30 mm and 50 mm, which are considered as characteristic wall impingement distances for light- and heavy-duty bores in diesel engines, respectively. The optical soot measurements imply a positive influence of wall on the rate of soot oxidation. Numerical simulations are employed to elucidate importance of different mechanisms for the air entrainment, i.e., air entrainment prior to flame lift-off position, enhanced mixing due to the wall impingement and enhanced mixing by the entrainment wave. The results show that oxidation process after the end of injection is driven by a different mixing mechanism depending on the distance to the wall. The 30 mm case resulted in a “mixing boost”, where the dominant mixing mechanism is the wall impingement vortex mixing, which gives rise to the fastest soot decay among the cases. The mixing in the 50 mm case is governed by a late wall impingement vortex mixing, giving rise to a low, but a constant air entrainment rate, i.e., a “mixing plateau”. The free jet case resulted in mixing governed by the entrainment wave mechanism. Both wall impingement cases have faster soot oxidation rate compared with the free jet case, but due to a different underlying mixing process. LES is shown to be able to replicate the line-of-sight measurements of natural OH* chemiluminescence and distribution of soot region from the optical soot diagnostics.     

Epitaxial graphene perfection vs. SiC substrate quality

Polytype instability of SiC epitaxial films was the main focus of attention in the experiment performed since this factor has a decisive influence on graphene growth, which was the second stage of the experiment. Layers deposited in various initial C/Si ratios were analyzed.     

Monte Carlo simulation code for confocal 3D micro‐beam X‐ray fluorescence analysis of stratified materials

Stratified materials are of great importance for many branches of modern industry, e.g. electronics or optics and for biomedical applications. Examination of chemical composition of individual layers and determination of their thickness helps to get information on their properties and function. A confocal 3D micro X‐ray fluorescence (3D µXRF) spectroscopy is an analytical method giving the possibility to investigate 3D distribution of chemical elements in a sample with spatial resolution in the micrometer regime in a non‐destructive way. Thin foils of Ti, Cu and Au, a bulk sample of Cu and a three‐layered sandwich sample, made of two thin Fe/Ni alloy foils, separated by polypropylene, were used as test samples. A Monte Carlo (MC) simulation code for the determination of elemental concentrations and thickness of individual layers in stratified materials with the use of confocal 3D µXRF spectroscopy was developed. The X‐ray intensity profiles versus the depth below surface, obtained from 3D µXRF experiments, MC simulation and an analytical approach were compared. Correlation coefficients between experimental versus simulated, and experimental versus analytical model X‐ray profiles were calculated. The correlation coefficients were comparable for both methods and exceeded 99%. The experimental X‐ray intensity profiles were deconvoluted with iterative MC simulation and by using analytical expression. The MC method produced slightly more accurate elemental concentrations and thickness of successive layers as compared to the results of the analytical approach. This MC code is a robust tool for simulation of scanning confocal 3D µXRF experiments on stratified materials and for quantitative interpretation of experimental results. Copyright © 2011 John Wiley & Sons, Ltd.     

Unified encoding for hyper-heuristics with application to bioinformatics

This paper introduces a new approach to applying hyper-heuristic algorithms to solve combinatorial problems with less effort, taking into account the modelling and algorithm construction process. We propose a unified encoding of a solution and a set of low level heuristics which are domain-independent and which change the solution itself. This approach enables us to address NP-hard problems and generate good approximate solutions in a reasonable time without a large amount of additional work required to tailor search methodologies for the problem in hand. In particular, we focused on solving DNA sequencing by hybrydization with errors, which is known to be strongly NP-hard. The approach was extensively tested by solving multiple instances of well-known combinatorial problems and compared with results generated by meta heuristics that have been tailored for specific problem domains.     

Structurally tailored carbon xerogels produced through a sol–gel process in a water–methanol–inorganic salt solution

The impact of solvent composition as well as inorganic salt content and type on carbon xerogel structure was investigated. Carbon xerogels were derived from the sol–gel polycondensation of resorcinol with furfural in a water–methanol–inorganic salt solution. As inorganic salts, NaCl, NH₄ClO₄ and FeCl₃ were used. In order to conduct an accurate examination of the carbon xerogel structures and textures, inorganic salts were removed prior to carbonization. The xerogel structures can be tailored according to the water/methanol ratio and, to a lesser extent, according to the inorganic salt content and type in the starting solution. As a result, a significant amount of salt can be introduced to the gel network of the desired structure. The morphology and physical properties of the organic xerogels, carbon xerogels and their composites were characterized by means of SEM, N₂ sorption and XRD. It was found that samples derived from mixtures with FeCl₃ manifest well developed mesoporosity and depleated microporosity in comparison to samples prepared from mixtures with NaCl and NH₄ClO₄. Iron ions chemically bond to the xerogel matrix and cause its partial graphitization during the carbonization process, resulting in enhanced mesoporosity.     

Mean flow properties for equatorially trapped internal water wave–current interactions

The aim of this paper is to provide an analysis of the mean flow velocities, and the related mass transport induced by equatorially trapped internal water waves with a constant underlying current.     

Coupling and exponential ergodicity for stochastic differential equations driven by Lévy processes

We present a novel idea for a coupling of solutions of stochastic differential equations driven by Lévy noise, inspired by some results from the optimal transportation theory. Then we use this coupling to obtain exponential contractivity of the semigroups associated with these solutions with respect to an appropriately chosen Kantorovich distance. As a corollary, we obtain exponential convergence rates in the total variation and standard $L^1$-Wasserstein distances.     

Photophysics,Excited‐state Double‐Proton Transfer and Hydrogen‐bonding Properties of 5‐Deazaalloxazines

The photophysical properties of 5‐deazaalloxazine and 1,3‐dimethyl‐5‐deazaalloxazine were studied in different solvents. These compounds have higher values of fluorescence quantum yields and longer fluorescence lifetimes, compared to those obtained for their alloxazine analogs. Electronic structure and S₀–S_i transitions were investigated using the ab initio methods [MP2, CIS(D), EOM‐CCSD] with the correlation‐consistent basis sets. Also the time‐dependent density functional theory (TD‐DFT) has been employed. The lowest singlet excited states of 5‐deazaalloxazine and 1,3‐dimethyl‐5‐deazaalloxazine are predicted to have the π, π* character, whereas similar alloxazines have two close‐lying π, π* and n, π* transitions. Experimental steady‐state and time‐resolved spectral studies indicate formation of an isoalloxazinic excited state via excited‐state double‐proton transfer (ESDPT) catalyzed by an acetic acid molecule that forms a hydrogen bond complex with the 5‐deazaalloxazine molecule. Solvatochromism of both 5‐deazaalloxazine and its 1,3‐dimethyl substituted derivative was analyzed using the Kamlet–Taft scale and four‐parameter Catalán solvent scale. The most significant result of our studies is that the both scales show a strong influence of solvent acidity (hydrogen bond donating ability) on the emission properties of these compounds, indicating the importance of intermolecular solute–solvent hydrogen‐bonding interactions in their excited state.     

Synthesis of unsymmetrical alkyl acetals via addition of primary alcohols to allyl ethers mediated by ruthenium complexes

Abstract  

Ru-catalyzed synthesis of mixed alkyl–alkyl acetals via addition of primary alcohols to allyl ethers has been extended to include long-chain and/or functionalized substrates. The catalytic systems for these reactions were generated from RuCl₂(PPh₃)₃ and [RuCl₂(1,5-COD)]_x and phosphines [PPh₃ or P(p-chlorophenyl)₃] or SbPh₃. Of particular importance is the almost quantitative elimination of transacetalization. The addition proceeds through allyl complexes, not via isomerization of allyl ethers––subsequent addition of ROH to vinyl ethers.     

Switching heterotrimeric G protein subunits with a chemical dimerizer

The selective manipulation of single intracellular-signaling events remains one of the key tasks when studying signaling networks. Here, we demonstrate for the first time the stimulation of FKBP fusions of various subunits of heterotrimeric G proteins by the simple addition of the chemical dimerizer rapamycin. Activation of constitutively active Gα(q), but not its GDP-bound form, leads to sustained oscillations of intracellular calcium and myo-inositol 1,4,5-trisphosphate (InsP(3)) levels in HEK cells, independent of the activation of endogenous Gα(q), in full agreement with the InsP(3)-Ca(2+) cross-coupling model of calcium oscillations. Rapamycin-induced translocation of wild-type Gα(s) to the plasma membrane results in elevated cAMP levels. Activation of rapamycin-inducible Gα(s) or Gβ(1)γ(2) evokes extensive modulation of ATP-induced calcium transients. The results demonstrate that inducible heterotrimeric G protein subunits will provide ways for dissecting G protein-coupled receptor signaling.