Advances in Hybrid Composites for Photocatalytic Applications: A Review

Heterogeneous photocatalysts have garnered extensive attention as a sustainable way for environmental remediation and energy storage process. Water splitting, solar energy conversion, and pollutant degradation are examples of nowadays applications where semiconductor-based photocatalysts represent a potentially disruptive technology. The exploitation of solar radiation for photocatalysis could generate a strong impact by decreasing the energy demand and simultaneously mitigating the impact of anthropogenic pollutants. However, most of the actual photocatalysts work only on energy radiation in the Near-UV region (<400 nm), and the studies and development of new photocatalysts with high efficiency in the visible range of the spectrum are required. In this regard, hybrid organic/inorganic photocatalysts have emerged as highly potential materials to drastically improve visible photocatalytic efficiency. In this review, we will analyze the state-of-art and the developments of hybrid photocatalysts for energy storage and energy conversion process as well as their application in pollutant degradation and water treatments.     

Efficient removal of DNA from proteomic samples prior to two-dimensional map analysis

Several methods have been described in the literature for removal of DNA from protein samples prior to proteome analysis. They in general involve protein precipitation techniques. In other protocols, DNAse treatment is suggested prior to precipitation of proteins in excess acetone. All these methods have been evaluated and found to perform poorly in DNA removal, as illustrated by two-dimensional (2D) maps where horizontal and vertical sample streaking are still substantial. Such removal is in general necessary in tissue lysates and especially when analysing sub-cellular organelles, such as nuclei, where the high DNA levels strongly interfere with proteome analysis. Another method is proposed here for efficient DNA removal: two-phase extraction of DNA in chloroform/phenol/isoamyl alcohol, a procedure commonly used to rid DNA samples of protein contaminants, but rarely applied to protein preparation. This extraction is not very efficient if performed at slightly acidic to neutral pH values, but it performs extremely well at pH values of 9.5 or higher. The 2D maps thus obtained of Escherichia coli lysates as well as extracts from purified nuclei of eukaryotic cells are not only devoid of any vertical or horizontal streaking, but exhibit many more spots, especially in the alkaline region of the 2D gels, suggesting that these basic proteins were in general lost to proteome analysis due to co-precipitation in tenacious protein–DNA complexes. It is hypothesized that the alkaline pH values adopted in the two-phase extraction help to fully disrupt any residual DNA–protein complexes, due to strong Coulombic repulsion.     

Single Drop Dynamics under Shearing Flow in Systems with a Viscoelastic Phase

In this article, we discuss the dynamics of a single drop immersed in an immiscible liquid, under an imposed shear flow. The two situations of a viscoelastic matrix with a Newtonian drop and of a viscoelastic drop in a Newtonian matrix are considered, both systems being characterized by a viscosity ratio equal to one, and by the same elasticity parameter. Experimental data are taken with a rheo-optical computer-assisted shearing device, allowing for drop observation from the vorticity direction of the shear flow. Data favourably compare with predictions of the recently proposed Maffettone-Greco model, where the drop is described as a deforming ellipsoid.     

Elasticity of flexible and semiflexible polymers with extensible bonds in the Gibbs and Helmholtz ensembles

Stretching experiments on single molecules of arbitrary length opened the way for studying the statistical mechanics of small systems. In many cases in which the thermodynamic limit is not satisfied, different macroscopic boundary conditions, corresponding to different statistical mechanics ensembles, yield different force-displacement curves. We formulate analytical expressions and develop Monte Carlo simulations to quantitatively evaluate the difference between the Helmholtz and the Gibbs ensembles for a wide range of polymer models of biological relevance. We consider generalizations of the freely jointed chain and of the worm-like chain models with extensible bonds. In all cases we show that the convergence to the thermodynamic limit upon increasing contour length is described by a suitable power law and a specific scaling exponent, characteristic of each model.     

The formation of proton and alkali metal complexes with ligands of biological interest in aqueous solution. Thermodynamics of Li+, Na+ and K+-dicarboxylate complex formation

The formation and stability of Li⁺, Na⁺ and K⁺ complexes with oxalate, malonate, succinate, maleate, DL-malate and phthalate were studied potentiometrically at various ionic strengths. From the data thus obtained, as well as from several literature data on the protonation of the above-mentioned ligands in various ionic media and at various temperatures, the dependence of Na⁺ and K⁺ complex formation on temperature was determined. The dependence on ionic strength, both for the protonation and the complex formation, is also discussed.     

Co-adsorption of surfactants and propyl gallate on the hydrophilic oxide surfaces

Propyl gallate (PG) adsolubilisation in the cationic, anionic and nonionic surfactant micelles formed in the bulk solution and at the silica/solution interface has been investigated. It was found that in the absence of surfactant, propyl gallate does not adsorb on the silica surface from aqueous solution. However, in the presence of hexyltrimethylammonium bromide (CTAB), its uptake by silica significantly increases. Alumina is quite an effective adsorbent for SDS and propyl gallate and does not adsorb nonionic TX-100. The addition of PG promotes adsorption of SDS and TX-100.     

Effect of wall slip on the viscoelastic particle ordering in a microfluidic channel

The formation of a line of equally spaced particles at the centerline of a microchannel, referred as “particle ordering,” is desired in several microfluidic applications. Recent experiments and simulations highlighted the capability of viscoelastic fluids to form a row of particles characterized by a preferential spacing. When dealing with non-Newtonian fluids in microfluidics, the adherence condition of the liquid at the channel wall may be violated and the liquid can slip over the surface, possibly affecting the ordering efficiency. In this work, we investigate the effect of wall slip on the ordering of particles suspended in a viscoelastic liquid by numerical simulations. The dynamics of a triplet of particles in an infinite cylindrical channel is first addressed by solving the fluid and particle governing equations. The relative velocities computed for the three-particle system are used to predict the dynamics of a train of particles flowing in a long microchannel. The distributions of the interparticle spacing evaluated at different slip coefficients, linear particle concentrations, and distances from the channel inlet show that wall slip slows down the self-assembly mechanism. For strong slipping surfaces, no significant change of the initial microstructure is observed at low particle concentrations, whereas strings of particles in contact form at higher concentrations. The detrimental effect of wall slip on viscoelastic ordering suggests care when designing microdevices, especially in case of hydrophobic surfaces that may enhance the slipping phenomenon.     

Enzymes Hosted in Reverse Micelles in Hydrocarbon Solution

Reverse micelles are spheroidal aggregates formed by certain surfactants in apolar media. In contrast to normal micelles in water, the polar head groups of the surfactant molecules are directed towards the interior of the aggregate and form a polar core which can solubilize water (the “water pool”); the lipophilic chains are exposed to the solvent. The water of the water pool exhibits properties that (depending on the mole ratio of water to surfactant) differ from those of bulk water. Surprisingly, these reverse micelles are able to solubilize in hydrocarbon solvents hydrophilic molecules, e.g., enzymes and even plasmids, that are much larger than the original water-pool diameter. These biopolymer-containing reverse micelles can be viewed as novel microreactors, whose physical properties can be controlled through the water content. Remarkable is the ability of enzyme-containing micelles to react with water-insoluble, hydrocarbon-soluble substrates, as in the example of lipoxygenase with linoleic acid.     

How to Obtain the Maximum Properties Flexibility of 3D Printed Ketoprofen Tablets Using Only One Drug-Loaded Filament?

The flexibility of dose and dosage forms makes 3D printing a very interesting tool for personalized medicine, with fused deposition modeling being the most promising and intensively developed method. In our research, we analyzed how various types of disintegrants and drug loading in poly(vinyl alcohol)-based filaments affect their mechanical properties and printability. We also assessed the effect of drug dosage and tablet spatial structure on the dissolution profiles. Given that the development of a method that allows the production of dosage forms with different properties from a single drug-loaded filament is desirable, we developed a method of printing ketoprofen tablets with different dose and dissolution profiles from a single feedstock filament. We optimized the filament preparation by hot-melt extrusion and characterized them. Then, we printed single, bi-, and tri-layer tablets varying with dose, infill density, internal structure, and composition. We analyzed the reproducibility of a spatial structure, phase, and degree of molecular order of ketoprofen in the tablets, and the dissolution profiles. We have printed tablets with immediate- and sustained-release characteristics using one drug-loaded filament, which demonstrates that a single filament can serve as a versatile source for the manufacturing of tablets exhibiting various release characteristics.     

Synthesis of new 1,2,3-triazolo[1,2-a]benzotriazole derivatives or substituted 2,3-benzo-1,3a,6,6a-tetraazapentalenes. II

This paper continues the synthesis of new 1,2,3-triazolo[1,2-a]benzotriazoles or 2,3-benzo-1,3a,6,6a-tetrazapentalenes to submit to biological assays. The derivatives were obtained by deoxycyclization reactions of appropriate nitrophenyl-1,2,3-triazole derivatives and by thermal decomposition of appropriate azidophenyl-1,2,3-triazoles (Schemes 1 and 2). Some attempts to extend these synthetic routes to the preparation of 1,2,4-triazolo[1,2-a]benzotriazoles (Scheme 3) and 1,2,3-triazolo[1,2-b]-4H-1,2,3-benzo-triazines (Scheme 4) completely failed.