The First Online Capillary Electrophoresis-Microscale Thermophoresis (CE-MST) Method for the Analysis of Dynamic Equilibria—The Determination of the Acidity Constant of Fluorescein Isothiocyanate

This article presents the first successful application of a capillary electrophoresis-microscale thermophoresis tandem technique (CE-MST) for determining the values of equilibrium constant, realized by connecting online the CE and MST instruments using a fused-silica capillary. The acid-base dissociation of fluorescein isothiocyanate, expressed by the acidity constant value (pK_a), was used as a model. The measurement procedure consisted of introducing a mixture containing the analyte and a deliberately added interferent into the CE capillary, electrophoretic separation of the analyte from the interferent, the detection of the analyte with a CE-integrated detector, detection with a MST detector, and then stopping the flow temporarily by turning off the voltage source to conduct the thermophoretic measurement. The analysis of migration times, peak areas and MST responses obtained concurrently for the same sample allowed us to determine the pK_a value using three independent methods integrated within one instrumentation. The analyte was effectively separated from the interferent, and the acidity values turned out to be consistent with each other. An attempt was also made to replace the standard commercial CE instrument with a home-made portable CE setup. As a result, the similar pK_a value was obtained, at the same time proving the possibility of increasing cost efficiency and reducing energy consumption. Overall, the CE-MST technique has a number of limitations, but its unique analytical capabilities may be beneficial for some applications, especially when sample separation is needed prior to the thermophoretic measurement.     

HBr or not HBr? That is the question: crystal structure of 6‐hydroxy‐1,4‐diazepane‐1,4‐diium dibromide redetermined

Liu et al. [Chin. J. Struct. Chem. (1996). 15 , 371–373] reported the structure of 6‐hydroxy‐1,4‐diazepane di(hydrogen bromide), C₅H₁₂N₂O·2HBr, which was interpreted in terms of neutral diazepane and HBr molecules. We found, however, ample evidence that the formation of an organic salt, consisting of a diammonium cation and two bromide anions, is more plausible. This interpretation is also in agreement with thermogravimetric analysis and with the observed solution behaviour. The crystal structure of 6‐hydroxy‐1,4‐diazepane‐1,4‐diium dibromide, C₅H₁₄N₂O²⁺·2Br^?, measured at 142 K, crystallized in the orthorhombic space group P2₁2₁2₁. The structure displays O—H…Br and N—H…Br hydrogen bonding. Contact distances are given. A search in the Cambridge Structural Database for the singly‐bonded H—Br moiety revealed a total of 69 structures. The question, whether these structures really include HBr as neutral molecules or rather Br^? anions and a protonated substrate such as an amine, is addressed.     

Borazon-gate pH-sensitive field effect transistor

A borazon-gate ISFET is used as a pH sensor. Boron nitride was deposited by the reactive-pulse plasma method and electron diffraction served for membrane identification. The borazon-gate sensors responded linearly to pH in the range 1.8–10; the slope was about 52 mV pH^?1. Selectivity for H⁺ ions over K⁺, Na⁺ or Ca²⁺ ions was better than that of silicon nitride-gate ISFETs.     

Combustion synthesis as a novel method for production of 1-D SiC nanostructures

1-D nanostructures of cubic phase silicon carbide (beta-SiC) were efficiently produced by combustion synthesis of mixtures containing Si-containing compounds and halocarbons in a calorimetric bomb. The influence of the operating parameters on 1-D SiC formation yield was studied. The heat release, the heating rate, and the chamber pressure increase were monitored during the process. The composition and structural features of the products were characterized by elemental analysis, X-ray diffraction, differential thermal analysis/ thermogravimetric technique, Raman spectroscopy, scanning and transmission electron microscopy, and energy-dispersive X-ray spectrometry. This self-induced growth process can produce SiC nanofibers and nanotubes ca. 20-100 nm in diameter with the aspect ratio higher than 1000. Bulk scale Raman studies showed the product to be comprised of mostly cubic polytype of SiC and that finite size effects are present. We believe that the nucleation mechanism involving radical gaseous species is responsible for 1-D nanostructures growth. The present study has enlarged the family of nanofibers and nanotubes available and offers a possible, new general route to 1-D crystalline materials.     

Vibrational and structural analysis of (hydroxypyridin-3-yl-methyl)phosphonic acid

In this work the vibrational analysis of (hydroxypyridin-3-yl-methyl)phosphonic acid (MC5) is presented using both experimental and theoretical methods. FT-IR spectra of the solid state MC5 precipitated at certain pH values in which consecutive deprotonations of this ligand occurs were recorded. Thus, we were able to measure IR spectra of cationic, two anionic and zwitterion forms of MC5. Additionally, the geometry optimization and vibrational frequencies were performed at the B3PW91 level with the 6-31G** basis set for each species. As was shown, FT-IR spectra could be fairly good reproduced by a theoretical method applied here. Additionally, charge distributions and aromaticity index were calculated for discussed MC5 forms by using generalized atomic polar tensor and harmonic oscillator model of aromaticity, respectively.     

2‐Aminopyrimidine–3,3,3‐triphenylpropanoic acid (1/1)

The title bimolecular compound, C₄H₅N₃·C₂₁H₁₈O₂, constructed from 2‐aminopyrimidine and 3,3,3‐triphenylpropanoic acid, forms a tetramolecular hydrogen‐bonded motif via O—H...N, N—H...O and N—H...N contacts. This aggregate organizes to give crystal‐packing motifs with hydrophilic and hydrophobic regions.     

Optimal control methods applied on the ionization processes of alkali dimers

We present two novel optimization methods by employing shaped fs-laser pulses in a closed feedback loop. The first describes control pulse cleaning where extraneous features were removed by applying genetic pressure on certain pulse components. The second reports parametric optimization with intuitive parameters such as subpulse distances, chirps, phase differences, and spectral peak patterns. These methods were conducted on the ionization process of alkali dimers produced in a molecular beam and improved the performances of the optimized pulses compared with short pulses at the same pulse energy. Moreover, we attempt to analyze the obtained pulse shapes regarding the underlying optimized processes. Further investigations concerning isotope selective fragmentation and optimal control of excitation processes of ultracold rubidium dimers in a magneto-optical trap (MOT) are also shown.     

Higher Sucrose Analogs: Homologation of a Glucose Unit of Sucrose by Two Carbon Atoms

Abstract

The primary hydroxyl groups (at C-6 and C-6′) in 2,3,4,3′4′-penta-O-benzyl-l′-O-methoxymethyl sucrose (2) can be reactively differentiated with tert-butyldiphenylsilyl chloride. Reaction of 2 with TBDPSCl afforded only one monosilylated product protected at C-6′ (6). The regioisomeric monoprotected sucrose 8 was prepared by selective deprotection of the double silylated derivative 7. Compound 6 was converted into 2,3,4,3′,4′-penta-O-benzyl-6-carbomethoxymethylidene-1′-O-methoxymethylsucrose 10 in three steps. Osmylation of the double bond in 10 afforded stereoisomeric homologated sucroses: 11a [6(S),7(R)] and 11b [6(R),7(S)] in the ratio 3:2. A large downfield shift of the H-1 (up to 0.5 ppm) was observed for 6′-silylated derivatives.     

Synthesis and Structural Analysis of Higher Analogs of Sucrose

ABSTRACT

Three sucrose monoalcohols with free hydroxyl groups at C-1', C-6, and C-6' (1, 4, and 6) were prepared selectively and in good yield from 2,3,3',4,4'-penta-O-benzylsucrose. These compounds were oxidized to aldehydes and reacted with stabilized ylide, Ph₃P=CHCO₂Me to afford appropriate α,β-unsaturated esters 10, 11, and 12. Each olefin was cis-hydroxylated with OsO₄/NMO to stereoisomeric diols 13/14, 15/16, and 17/18, configurations of which were assigned by chemical correlation and CD evaluation. Stereoselectivity of the osmylation reaction was surprisingly low (ca 3:2), especially as compared to a similar process performed on simple derivatives of 6,7-unsaturated methyl glycosides for which the ratio of isomeric diols was assigned as 10:1. The osmylation of 11 (derivative homologated by a C₂-unit at the glucose part) did not obey Kishi's rule. Horner-Emmons reaction of sucrose aldehyde 7 with a sugar-derived phosphonate 22 afforded α,β-unsaturated derivative 24, homologated by a C₇-unit at the glucose end.