Ab initio molecular orbital study of ground and low-lying electronic states of CoCN

The ground and low-lying excited states of CoCN have been studied by ab initio multireference single and double excitation configuration interaction (MR-SDCI) calculations with Davidson's correction Q and Cowan-Griffin's relativistic corrections. The electronic ground state of CoCN is (3)Phi(i) and the equilibrium geometry is linear with bond lengths of r(e)(Co-C)=1.8540 A and r(e)(C-N)=1.1677 A, substantially different from the experimentally derived values of r(0)(Co-C)=1.8827(7) A and r(0)(C-N)=1.1313(10) A. The first excited state is (3)Delta(i), separated from the ground state by 727 cm(-1). Larger dynamical electron correlation energy for the low-spin (3)Phi state than for the high-spin (5)Phi state makes the (3)Phi state to be the ground state, which is discussed in terms of the differences in natural orbitals. A new spin-orbit interaction scheme between the X (3)Phi(i) and 1 (3)Delta(i) states is proposed.     

The ruthenium-catalyzed reduction and reductive N-alkylation of secondary amides with hydrosilanes: practical synthesis of secondary and tertiary amines by judicious choice of hydrosilanes

A triruthenium cluster, (mu3,eta2,eta3,eta5-acenaphthylene)Ru3(CO)7 (1) catalyzes the reaction of secondary amides with hydrosilanes, yielding a mixture of secondary amines, tertiary amines, and silyl enamines. Production of secondary amines with complete selectivity is achieved by the use of higher concentration of the catalyst (3 mol %) and the use of bifunctional hydrosilanes such as 1,1,3,3-tetramethyldisiloxane. Acidic workup of the reaction mixture affords the corresponding ammonium salts, which can be treated with a base, providing a facile method for isolation of secondary amines with high purity. In contrast, tertiary amines are formed with high selectivity by using lower concentration of the catalyst (1 mol %) and polymeric hydrosiloxanes (PMHS) as reducing agent. Reduction with PMHS encapsulates the ruthenium catalyst and organic byproducts to the insoluble silicone resin. The two reaction manifolds are applicable to various secondary amides and are practical in that the procedures provide the desired secondary or tertiary amine as a single product. The product contaminated with only minimal amounts of ruthenium and silicon residues. On the basis of the products and observed side products as well as NMR studies a mechanistic scenario for the reaction is also described.     

A Chemically and Electrochemically Switchable [2]Catenane Incorporating a Tetrathiafulvalene Unit

A mechanical switch in a [2]catenane , made up of a cyclobis(paraquat-p-phenylene) tetracation interlocked with a macrocyclic polyether containing a redox-active tetrathiafulvalene (TTF) unit and a 1,5-dioxynaphthalene ring system, can be thrown either chemically or electrochemically. The neutral TTF unit resides “inside” the tetracationic cyclophane in the reduced state and “alongside” it in the oxidized species (TTF⁺/ TTF²⁺). Switching between the reduced (I⁴⁺) and oxidized state (I⁵⁺(I⁶⁺)) is accompanied by a dramatic color change.     

ASACUSA MUSASHI: New progress with intense ultra slow antiproton beam

Our group “ASACUSA MUSASHI” has established an efficient way for accumulating antiprotons and extracting them as intense ultra-slow mono-energetic beams at the CERN-AD facility. This novel beam opens new frontiers for investigating a variety of physics. For realizing H? spectroscopy and the test for charge-parity-time symmetry, we have also developed the cusp trap, a combination of an anti-Helmholz superconducting coil and a multi-ring electrode trap, for trapping both antiprotons and positrons and then synthesizing antihydrogens. Recently, the cusp trap was practically used to accumulate antiprotons. The last piece for synthesizing antihydrogens in the cusp trap is the positron accumulator. We have developed a compact system to effectively accumulate positrons based on N₂ gas-buffer scheme with a specially designed high precision cylindrical multi-ring electrode trap. The recent progress of the developing work is an important milestone for upcoming antihydrogen science of ASACUSA MUSASHI.     

First application of the depth profile of silica species as a tracer by fast‐atom bombardment mass spectrometry: investigation of the circulation of seawater and silica uptake by diatoms

Silica, represented by SiO₂, is the general name for the compounds composed of Si, O and H with their derivative complexes. Silica forms various chemical species in aquatic solutions, such as a monomer (Si(OH)₃O⁻), dimer (Si₂(OH)₅O), and others. These species are known to vary in their relative abundances in solution depending on the chemical and physical conditions. Silica species dissolved in seawater have been examined by fast-atom bombardment mass spectrometry (FAB-MS) to elucidate the behavior of silica and its circulation as a novel tracer reflecting the chemical and physical conditions of seawater and the bioactivity of diatoms, which take up silica. In the seawater of Tokyo Bay, silica species such as [Si(OH)₂O₂Na]⁻ ([monomer–Na]⁻), [Si₂(OH)₅O₂]⁻ ([dimer]⁻), [Si₂(OH)₄O₃Na]⁻ ([dimer–Na]⁻), [Si₄(OH)₇O₅]⁻ ([cyclic tetramer]⁻), [Si₄(OH)₆O₆Na]⁻ ([cyclic tetramer–Na]⁻), [Si₄(OH)₉O₄]⁻ ([linear tetramer]⁻) and [Si₄(OH)₈O₅Na]⁻ ([linear tetramer–Na]⁻) were observed and assigned by FAB-MS. To investigate the suitability of silica species as a tracer, the relative peak intensity ratios of silica species observed in the mass spectra, i.e. the profiles of the ratio of the linear tetramer to the cyclic tetramer (m/z 329/311) and the ratio of the dimer to the cyclic tetramer (m/z 173/311) against depth, were examined to determine the annual changes and reproducibility of the depth profiles. In particular, the depth profile of the relative ratio of the linear tetramer to the cyclic tetramer, 329/311, exhibits critical changes depending on the seawater budget. These changes in the relative ratios were identified by an experiment involving a simple sodium chloride solution system. Our measurement is expected to elucidate the dynamics of silica and its role as ‘food’ for diatoms, and we showed that speciation using mass spectrometry is a powerful tool for examining elemental behavior in nature and environmental changes. Our results suggest that a silica tracer is useful for investigating the behavior of seawater in small coastal regions and the uptake of silica by diatoms. Copyright © 2009 John Wiley & Sons, Ltd.     

Reversible haptotropic shift in zirconocene-hexapentaene complexes

Low-valent zirconocene species reacted with 1,1,6,6-tetraalkyl-1,2,3,4,5-hexapentaenes to form both 1-zirconacyclopent-3-ynes and eta2-pi-coordinated complexes according to the alkyl groups (R) and the existence of the neutral ligand (L). Haptotropic interconvertion between these two complexes was observed. It was proposed that double insertion of isocyanide into the Zr-C bond of 1-zirconacyclopent-3-ynes takes place via the isocyanide adduct of the eta2-pi-complex as an intermediate.     

Preparation of monodispersed vinylpyridine–divinylbenzene porous copolymer resins and their application to high-performance liquid chromatographic separation of aromatic amines

For the separation of aromatic amines, two types of monodispersed porous polymer resins were prepared by the copolymerization of 2-vinylpyridine and 4-vinylpyridine with divinylbenzene in the presence of template silica gel particles (particle size 5 μm), followed by dissolution of the template silica gel in an alkaline solution. The transmission electron micrographs and the scanning electron micrograph revealed that these templated polymer resins have a spherical morphology with a good monodispersity and porous structure. Using these monodispersed polymer resins, the high-performance liquid chromatographic separation of aromatic amines in the mobile phases of pHs 2.0, 2.9, 4.1, 7.2 and 11.7 were carried out. The 2-vinylpyridine–divinylbenzene copolymer resins showed slightly stronger retentions for aromatic amines than the 4-vinylpyridine–divinylbenzene copolymer resins. Under acidic conditions (around pH 2.0), aniline and the toluidines showed no retention on these copolymer resins due to the repulsion between the cationic forms of these amines and pyridinium cations in the stationary phase, whereas less basic aromatic amines or non-basic acetanilide showed slight retentions. Above pH 4.1, the separation of aromatic amines with these polymer resins showed a typical reversed-phase mode separation. Therefore, the separation patterns of aromatic amines are effectively tunable by changing the pH value of the mobile phases. A good separation of eight aromatic amines was achieved at pH 2.9 using the 2-vinylpyridine–divinylbenzene copolymer resins.     

Creation and application of psychoactive designer drugs data library using liquid chromatography with photodiode array spectrophotometry detector and gas chromatography-mass spectrometry

In order to quickly confirm a potentially hazardous psychoactive designer drug (a compound in which part of the molecular structure of a stimulant or narcotic has been modified), we created a psychoactive drugs data library by performing analysis using liquid chromatography with photodiode array spectrophotometry (LC/PDA) and gas chromatography-mass spectrometry (GC/MS). The data in this library consist of the LC capacity factor (k′) ratios in relation to the internal standard, the ultraviolet (UV) spectra and the MS spectra of 104 compounds. By performing a comparative study of the data in this report with the analytical data for commercial and illegal drug products, it is possible to quickly identify the psychoactive designer drugs in 205 purchased products by using the library. Further, it is possible to analogize the structure of drugs for which there is no matching data in the library using similar data.Furthermore, when structural isomers of controlled substances have detected from the presented library, similarity of their biological effects on human will be predicted, thus leading to regulate their public circulation. Examples of these types of isomers include, for instance, the narcotic 3,4,5-trimethoxyamphetamine (TMA) and its positional isomers 2,4,5-trimethoxyamphetamine (TMA-2) and 2,4,6-trimethoxyamphetamine (TMA-6), or the narcotic 1-(3-chlorophenyl)piperazine (3CPP) and its isomers 1-(o-chlorophenyl)piperazine (2CPP) and 1-(p-chlorophenyl)piperazine (4CPP). Differentiation of these compounds is necessary in regulating them, and we report here the results of a study of a method to confirm these compounds using the present library.     

Continuous separation of particles using a microfluidic device equipped with flow rate control valves

We propose herein an improved microfluidic system for continuous and precise particle separation. We have previously proposed a method for particle separation called "pinched flow fractionation." Using the previously reported method, particles can be continuously separated according to differences in their diameters, simply by introducing liquid flows with and without particles into a specific microchannel structure. In this study, we incorporated PDMS membrane microvalves for flow rate control into the microfluidic device to improve the separation accuracy. By adjusting the flow rates distributed to each outlet, target particles could be precisely collected from the desired outlet. We succeeded in separating micron and submicron-size polymer particles. This method can be used widely for continuous and precise separation of various kinds of particles, and can function as an important part of microfluidic systems.     

In-Line Reactions and Ionizations of Vaporized Diphenylchloroarsine and Diphenylcyanoarsine in Atmospheric Pressure Chemical Ionization Mass Spectrometry

We propose detecting a fragment ion (Ph₂As⁺) using counter-flow introduction atmospheric pressure chemical ionization ion trap mass spectrometry for sensitive air monitoring of chemical warfare vomiting agents diphenylchloroarsine (DA) and diphenylcyanoarsine (DC). The liquid sample containing of DA, DC, and bis(diphenylarsine)oxide (BDPAO) was heated in a dry air line, and the generated vapor was mixed into the humidified air flowing through the sampling line of a mass spectrometer. Humidity effect on the air monitoring was investigated by varying the humidity of the analyzed air sample. Evidence of the in-line conversion of DA and DC to diphenylarsine hydroxide (DPAH) and then BDPAO was obtained by comparing the chronograms of various ions from the beginning of heating. Multiple-stage mass spectrometry revealed that the protonated molecule (MH⁺) of DA, DC, DPAH, and BDPAO could produce Ph₂As⁺ through their in-source fragmentation. Among the signals of the ions that were investigated, the Ph₂As⁺ signal was the most intense and increased to reach a plateau with the increased air humidity, whereas the MH⁺ signal of DA decreased. It was suggested that DA and DC were converted in-line into BDPAO, which was a major source of Ph₂As⁺.

Open image in new window

Graphical Abstract ?