Hydrophobic/hydrophilic P(VDF‐TrFE)/PHEA polymer blend membranes

Polymer blend membranes have been obtained consisting of a hydrophilic and a hydrophobic polymers distributed in co‐continuous phases. In order to obtain stable membranes in aqueous environments, the hydrophilic phase is formed by a poly(hydrohyethyl acrylate), PHEA, network while the hydrophobic phase is formed by poly(vinylidene fluoride‐co‐trifluoroethylene) P(VDF‐TrFE). To obtain the composites, in a first stage, P(VDF‐TrFE) is blended with poly(ethylene oxyde) (PEO), the latter used as sacrificial porogen. P(VDF‐TrFE)/PEO blend membranes were prepared by solvent casting at 70°C followed by cooling to room temperature. Then PEO is removed from the membrane by immersion in water obtaining a P(VDF‐TrFE) porous membrane. After removing of the PEO polymer, a P(VDF‐TrFE) membrane results in which pores are collapsed. Nevertheless the pores reopen when a mixture of hydroxethyl acrylate (HEA) monomer, ethyleneglycol dimethacrylate (as crosslinker) and ethanol (as diluent) is absorbed in the membrane and subsequent polymerization yields hybrid hydrophilic/hydrophobic membranes with controlled porosity. The membranes are thus suitable for lithium‐ion battery separator membranes and/or biostable supports for cell culture in biomedical applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 672–679     

Magneto-responsive nanocomposites: Preparation and integration of magnetic nanoparticles into films,capsules, and gels

This review reports on the latest developments in the field of magnetic nanocomposites, with a special focus on the potentials introduced by the incorporation of magnetic nanoparticles into polymer and supramolecular matrices. The general notions and the state of the art of nanocomposite materials are summarized and the results reported in the literature over the last decade on magnetically responsive films, capsules and gels are reviewed. The most promising concepts that have inspired the design of magneto-responsive nanocomposites are illustrated through remarkable examples where the integration of magnetic nanoparticles into organic architectures has successfully taken to the development of responsive multifunctional materials.     

Electrochemical Approach for the Production of Layered Double Hydroxides with a Well-Defined Co/MeIII Ratio

Layered double hydroxides (LDHs) have been widely studied for their plethora of fascinating features and applications. The potentiostatic electrodeposition of LDHs has been extensively applied in the literature as a fast and direct method to substitute classical chemical routes. However, the electrochemical approach does not usually allow for a fine control of the M^II/M^III ratio in the synthesized material. By employing a recently proposed potentiodynamic method, LDH films of controlled composition are herein prepared with good reproducibility, using different ratios of the trivalent (Fe or Al) to bivalent (Co) cations in the electrolytic solution. All the obtained materials are shown to be effective oxygen evolution reaction (OER) catalysts, and are thoroughly characterized by a multi-technique approach, including FE-SEM, XRD, Raman, AES and a wide range of electrochemical procedures.     

Analysis of Organic Compounds in Antarctic Snow and Their Origin

Abstract

Organic compounds extractable with n-hexane were identified and quantitatively determined in pack, surface and deep snow samples taken at different depths and collected at several altitudes above sea level from Antarctica during the 1993/94 Italian expedition. The comparison between the composition of organic compounds in snow and the ones in pack and sea-water samples pointed out that the three matrices substantially contain the same biogenic and anthropogenic organic compounds. The contribution of marine aerosol to organic content in the snow is confirmed by the enrichment ratios calculated for the more representative classes of identified compounds (n-alkanes, phthalates and low molecular weight alkylbenzenes). The changes in the composition of organic compounds in snow as the altitude increases seem to depend on the dimensional spectrum of the aerosol. Thus, smallest particles, richest in surfactant material, reach the highest altitudes.     

Irradiation of glass with infrared femtosecond laser pulses

We report a novel resistive random access memory using tri-layer dielectrics of GeO _x /nano-crystal TiO₂/TaON and low cost top Ni and bottom TaN electrodes. Excellent device performance of ultra-low 720 fJ switching energy, tight distributions of set/reset currents, and exceptionally long endurance of 5×10⁹ cycles were achieved simultaneously. Such excellent endurance may create new applications such as those used for Data Centers that are ascribed to the higher-κ nano-crystal TiO₂, hopping pass via grain boundaries, and fast switching speed of 100 ns to improve the dielectric fatigue during endurance stress.     

Phosphinine-Based Ligands in Gold-Catalyzed Reactions

A series of substituted phosphinines, 1-phosphabarrelenes and 5-phosphasemibullvalenes were synthesized and evaluated for their potential application as ligands in homogeneous catalytic reactions. While their buried volume (%V_bur) was calculated to get insight into the steric properties, [LNi(CO)₃] complexes were prepared in order to determine the corresponding Tolman electronic parameter. ETS-NOCV (extended-transition-state natural orbital for chemical valence) calculations on [LAuCl] complexes further allowed an estimation of the σ- and π-contributions to the L− M interaction. Au^I coordination compounds of selected examples were prepared and characterized by single crystal X-ray diffraction. Finally, the three classes of P^III compounds were successfully used in the Au^I-catalyzed cycloisomerization of N-2-propyn-1-ylbenzamide, showing very good activities and selectivities, which are comparable with the reported data of cationic phosphorus-based gold catalysts.     

Certification of nitrate in spinach powder reference material SPIN-1 by high-precision isotope dilution GC–MS

A high-precision exact-matching quadruple isotope dilution method (ID⁴MS) was employed for the quantitation of nitrate in an air-dried spinach powder Certified Reference Material (CRM). The analyte was extracted in hot water following addition of ¹⁵NO\({}_{3}^{-}\) internal standard. The blend was then treated with sulfamic acid to remove nitrite and with triethyloxonium tetrafluoroborate to promote aqueous conversion of nitrate into volatile EtONO₂. The derivative was analyzed by headspace GC–MS with 3-min elution time. The method performance was validated with a series of tests which demonstrated adequate selectivity and ruggedness. This method supported the development of novel SPIN-1 CRM giving a modest contribution to its uncertainty (u_char = 0.85%). With respect to previous attempts, the SPIN-1 was proven stable, homogeneous (u_hom = 0.44%), and suitable for spinach monitoring under EU regulations. On dried basis, the nitrate content of SPIN-1 was found to be 22.53 ± 0.43 mg/g (U_c = 1.9%, k = 2). The material was also used in an inter-laboratory study where four laboratories employed a total of ten measurement methods.

SPIN-1 Certified Reference Material for nitrate in spinach powder

     

Direct meta-C−H Perfluoroalkenylation of Arenes Enabled by a Cleavable Pyrimidine-Based Template

The development of efficient and mild methods for the synthesis of organofluorine compounds is of foremost interest in various fields of chemistry. A direct pyrimidine-based selective meta-C−H perfluoroalkenylation of arenes involving several commercially available perfluoroolefins is described. The synthetic versatility of the protocol is demonstrated by an extensive substrate scope including different benzylsulfonyl, alkylarene and phenylacetic acid scaffolds. The generality of this methodology including the meta-C−H perfluoroalkenylation of Ibuprofen, the facile cleavage of the directing group and gram-scale reactions are presented.