Ytterbium triflate-promoted tandem one-pot oxidation-Cannizzaro reaction of aryl methyl ketones

[reaction: see text] Ytterbium triflate was shown to be an effective catalyst in promoting the synthesis of either isopropyl esters or free alpha-hydroxy-arylacetic acids from substituted aromatic glyoxals and aryl methyl ketones, respectively. The reaction to provide acids starting from differently substituted ketones was carried out by an environmentally friendly method using an aqueous medium as a solvent and giving the adducts in 78-99% yield without any further purification after the usual workup.     

The potential of composite pyrolysis gas chromatographic mass spectra in the study of lignocellulosics

The objective of this work was to evaluate the use of composite mass spectral (CMS) data from pyrolysis gas chromatography/mass spectrometry (PY–GC/MS) for lignocellulosic materials. Various forages, by-products and fiber fractions derived from them were examined as CMS by PY–GC/MS. The PY–GC/MS system consisted of a heated platinum filament, a capillary gas chromatograph and an ion trap detector (ITD) mass spectrometer operated under electron impact conditions. Mass spectra were then composited in several ways by summing all the mass spectra acquired within retention times corresponding to major product classes. CMS data were entered in a dedicated library and compared using the ITD library editor software. The usefulness of such a simple procedure for studies related to lignocellulose analysis, such as forage recognition, development of analytical methods and digestibility/maturity correlation, is discussed.     

Optimizing control of simulated moving beds--linear isotherm

A new optimization based adaptive control strategy for simulated moving beds (SMBs) is proposed. A linearized reduced order model, which accounts for the periodic nature of the SMB process, is used for online optimization and control. The manipulated variables are the four inlet flow rates, the outputs are the raffinate and extract concentrations. Concentration measurements at the raffinate and extract outlets are used as the feedback information. The state estimate from the periodic Kalman filter is used for the prediction of the outlet concentrations over a chosen horizon. Predicted outlet concentrations are the basis for the calculation of the optimal input adjustments, which maximize the productivity and minimize the desorbent consumption subject to constraints on product purities. The realization of this concept is discussed and the implementation on a virtual eight column SMB platform is assessed, in the case of binary linear systems. For a whole series of typical plant disturbances it is shown that the proposed approach is effective in minimizing off-spec products and in achieving optimal SMB operation, also in the case where there are significant model uncertainties.     

Polycyclic aromatic hydrocarbons in the atmosphere: monitoring, sources, sinks and fate. II: Sinks and fate

This paper reviews the transformation processes that polycyclic aromatic hydrocarbons (PAHs) undergo in the atmosphere. These processes can take place both in the gas phase and in the particulate/aerosol one. Among the gas-phase processes, the most important ones are the daytime reaction with *OH and the nighttime reaction with *NO3. The relative importance of the two processes depends on the particular PAH molecule. For instance, gaseous naphthalene is mainly removed from the atmosphere upon reaction with *OH, while gaseous phenanthrene is mainly removed by reaction with *NO3. Oxy-, hydroxy-, and nitro-PAHs are the main transformation intermediates. Reaction with ozone and photolysis play a secondary role in the transformation of gaseous PAHs. The particle-associated processes are usually slower than the gas-phase ones, thus the gas-phase PAHs usually have shorter atmospheric lifetimes than those found on particulate. Due to the higher residence time on particulate when compared with the gas phase, direct or assisted photolysis plays a relevant role in the transformation of particle-associated PAHs. Among the other processes taking place in the condensed phase, nitration plays a very important role due to the health impact of nitro-PAHs, some of them being the most powerful mutagens found so far in atmospheric particulate extracts.     

Comparison of three sequential extraction procedures (original and modified 3 steps BCR procedure) applied to sediments of different origin

The 3 steps sequential extraction procedure proposed by the Standards Measurements and Testing program (SM&T--formerly BCR) of the European Union has been applied for the speciation of metals in sediments. Results obtained by the application of the BCR standardized procedure were compared to those of two four step sequential extraction procedures, which are different from the BCR procedure only for the introduction of an additional step with NaOCl, as 2nd and 3rd step respectively. Five different metals have been taken into consideration: Cd, Cu, Ni, Pb and Zn. The analytical performances of the laboratory have been evaluated using three certified reference materials: the BCR 601 lake sediment for the BCR sequential extraction procedure, PACS-1 and MESS-1 for total metal concentration. Results showed that the efficiency of NaOCl treatment is higher or at least equal to that of H2O2 treatment and that its selectivity is quite satisfying. Moreover the NaOCl treatment doesn't significantly influence the extraction of the easily reducible fraction.     

Accurate mass measurement of synthetic analogues of prazosine by matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry

Matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI-TOFMS) has been investigated as a tool for accurate determination of the molecular mass of synthetic analogues of prazosine, a molecule used for the treatment of hypertension. Samples were dissolved in methanol, mixed with mass calibration standards, and crystallised on the target with alpha-cyano-4-hydroxycinnamic acid as matrix. Acquisition of spectra was rapidly completed in reflectron mode, allowing high resolution (6000-10000) and sensitive (about 1-10 pmol of sample on target) determination of the synthetic products. The results show the effectiveness of MALDI-TOFMS for accurate mass determination of these fairly large molecules, which are otherwise difficult to analyse by other high-resolution mass spectrometric techniques.     

Determination of chlorite in drinking water by differential pulse voltammetry on graphite

The chlorite ion is an unavoidable by-product of the disinfection of drinking water by means of chlorine dioxide. The maximum concentration values of chlorite accepted in many countries regulations range from 0.2 to 1.0 mg L^–1. A simple, inexpensive and quickly set up voltammetric procedure for the on-site determination of chlorite in drinking water networks is described. This procedure is suitable for the whole range of applications in drinking water plants. A useful cell for on-field analysis has been developed. Surface morphology and behaviour of carbon-based working electrodes have been investigated by voltammetry and atomic force microscopy (AFM). Actual samples of different types of water networks have been analysed for chlorite concentration.     

Origin, nature, and fate of the fluorescent state of the green fluorescent protein chromophore at the CASPT2//CASSCF resolution

Ab initio CASPT2//CASSCF relaxation path computations are employed to determine the intrinsic (e.g., in vacuo) mechanism underlying the rise and decay of the luminescence of the anionic form of the green fluorescent protein (GFP) fluorophore. Production and decay of the fluorescent state occur via a two-mode reaction coordinate. Relaxation along the first (totally symmetric) mode leads to production of the fluorescent state that corresponds to a planar species. The second (out-of-plane) mode controls the fluorescent state decay and mainly corresponds to a barrierless twisting of the fluorophore phenyl moiety. While a "space-saving" hula-twist conical intersection decay channel is found to lie only 5 kcal mol(-1) above the fluorescent state, the direct involvement of a hula-twist deformation in the decay is not supported by our data. The above results indicate that the ultrafast fluorescence decay observed for the GFP chromophore in solution is likely to have an intrinsic origin. The possible effects of the GFP protein cavity on the fluorescence lifetime of the investigated chromophore model are discussed.     

Crystal,molecular and electronic structure of 1,1-diaryl-2-halogenoethylenes

On the basis of semiempirical calculations, the conformation of the isolated molecule of 2-bromo-1,1-diphenylprop-1-ene corresponding to the minimum of total energy was determined. Assuming some information on the localization of the molecules in the crystal, also the conformation in a theoretical crystal was studied. The results have been compared with the crystal structure of 2-bromo-1,1-diphenylprop-1-ene, as obtained by X-ray diffraction. From the comparison a slight displacement of the C2 atom was suggested.

---

Zusammenfassung Die dem Minimum der Gesamtenergie entsprechende Konformation des isolierten Moleküls von 2-Brom-1,1-diphenylprop-1-en wurde durch halb-empirische Methoden bestimmt. Gewisse Ergebnisse über die Anordnung der Moleküle im Kristall machten es möglich, die Konformation in einem theoretischen Kristall zu untersuchen. Nach Vergleich der Resultate mit der durch Röntgen-Analyse bestimmten Kristallstruktur des 2-Brom-1,1-diphenylprop-1-en wurde eine kleine Verschiebung des C2-Atoms vorgeschlagen.

---

Résumé Par le moyen de calculs semiempiriques on a déterminé la conformation de la molécule isolée de 2-bromo-1, 1-diphénilprop-1-ène, correspondant au minimum d'énergie totale. On a aussi étudié la conformation dans le cristal théorique en se basant sur des informations concernant la localisation des molécules dans le cristal. On a comparé ces résultats avec ceux que nous avons obtenus par la détermination de la structure cristalline du 2-bromo-1, 1-diphénilprop-1-ène avec la diffraction des rayons X: cette comparaison nous a porté à déplacer un petit peu l'atome C 2.

---

---

This work was supported by a grant from the Italian Consiglio Nazionale delle Ricerche.     

The ring-opening reaction of chromenes: a photochemical mode-dependent transformation

The efficiency of the photochemical ring-opening of chromenes (or benzopyrans) depends on the vibronic transition selected by the chosen excitation wavelength. In the present work, ab initio CASPT2//CASSCF calculations are used to determine the excited-state ring-opening reaction coordinate for 2H-chromene (C) and 2,2-diethyl-2H-chromene (DEC) and provide an explanation for such an unusual mode-dependent behavior. It is shown that excited-state relaxation and decay occur via a multimodal and barrierless (or nearly barrierless) reaction coordinate. In particular, the relaxation out of the Franck-Condon involves a combination of in-plane skeletal stretching and out-of-plane modes, while the second part of the reaction coordinate is dominated exclusively by a different out-of-plane mode. Population of this last mode is shown to be preparatory with respect to both C-O bond breaking and decay via an S(1)/S(0) conical intersection. The observed mode-dependent ring-opening efficiency is explained by showing that the vibrational mode corresponding to the most efficient vibronic transition has the largest projection onto the out-of-plane mode of the reaction coordinate. To support the computationally derived mechanism, we provide experimental evidence that the photochemical ring-opening reaction of 2,2-dimethyl-7,8-benzo(2H)chromene, that similarly to DEC exhibits a mode-dependent photoreaction, has a low ( approximately 1 kcal mol(-1)) activation energy barrier.