Reaction of the stable silylene Si[(NCH2But)2C6H4-1,2] with lithium amides

The thermally stable silylene Si[(NCH2But)2C6H4-1,2] 1 undergoes oxidative addition reactions with the lithium amides LiNRR'(R = SiMe3, R' = But; R = SiMe3, R' = C6H3Me2-2,6; R = R' = Me or R = R' = Pri) to afford the new lithium amides Li(THF)2[N(R)Si(SiMe3){(NCH2But)2C6H4-1,2}][R = But2 or R = C6H3Me2-2,6 (3a)] or the new tris(amino)functionalised silyllithiums Li(THF)x[Si{(NCH2But)2C6H4-1,2}NRR'][R = SiMe3, R' = C6H3Me2-2,6, x = 2 (3); R = R'= Me, x = 3 (4) or R = R' = Pri, x = 3 (5)]. Compounds 4 and 5 are stable at ambient temperature but compound 3 is thermally labile and converts into 3a upon heating. The pathway for the formation of 2 and 3 is discussed and the X-ray structures of 2-5 are presented.     

Origin, nature, and fate of the fluorescent state of the green fluorescent protein chromophore at the CASPT2//CASSCF resolution

Ab initio CASPT2//CASSCF relaxation path computations are employed to determine the intrinsic (e.g., in vacuo) mechanism underlying the rise and decay of the luminescence of the anionic form of the green fluorescent protein (GFP) fluorophore. Production and decay of the fluorescent state occur via a two-mode reaction coordinate. Relaxation along the first (totally symmetric) mode leads to production of the fluorescent state that corresponds to a planar species. The second (out-of-plane) mode controls the fluorescent state decay and mainly corresponds to a barrierless twisting of the fluorophore phenyl moiety. While a "space-saving" hula-twist conical intersection decay channel is found to lie only 5 kcal mol(-1) above the fluorescent state, the direct involvement of a hula-twist deformation in the decay is not supported by our data. The above results indicate that the ultrafast fluorescence decay observed for the GFP chromophore in solution is likely to have an intrinsic origin. The possible effects of the GFP protein cavity on the fluorescence lifetime of the investigated chromophore model are discussed.     

Non-centrosymmetric tetrameric assemblies of tetramethylammonium halides with uranyl salophen complexes in the solid state

Ditopic salophen-UO(2) receptors 1-4 and 7 co-crystallize with tetramethylammonium (TMA) chloride and fluoride salts producing good quality crystals amenable for X-ray diffraction characterization. The arrangement of the receptor and salt units in the crystal lattice is such that tetrameric ball-shaped assemblies are formed, where an inner cluster of four TMA cations are surrounded by an outer shell of four UO(2)-bound anions. These elaborate architectures, which occur in all cases, regardless of a certain degree of structural modification on the receptors, lead to lattices that belong to non-centrosymmetric (NCS) space groups. Interestingly, the tetragonal symmetry of the tetrameric ball-shaped assemblies is either retained (I4?) or lost (R3c and I4?3d) at the lattice level, without compromising the NCS nature of the crystal lattices. The principal X-ray investigation on TMAX (X = Cl/F) co-crystals, that is, 1-(TMA)Cl, 2-(TMA)Cl, 3-(TMA)Cl, 4-(TMA)Cl, 7-(TMA)Cl, and 7-(TMA)F, is accompanied by NMR and electrospray ionization (ESI) mass spectrometry studies to gather additional insight on the modality of formation of the solid state structures observed. The important role of cation-π interactions in the receptor-salt recognition process is renewed and strengthened by comparison with NMR titration data with a novel reference compound, the salophen-UO(2) complex 8. Given the importance of NCS and polar crystalline solids in the development of functional materials, this study shows that this property can be introduced into elaborate host-guest systems, as those which assemble in the architectures described here, thus expanding its field of applicability.     

Laccase–polyazetidine prepolymer–MWCNT integrated system: Biochemical properties and application to analytical determinations in real samples

Bioelectrochemical properties of Trametes versicolor Laccase (TvL) and Trametes hirsuta Laccase (ThL) immobilized by using polyazetidine prepolymer (PAP) onto multi-walled carbon nanotubes (MWCNTs) screen printed electrode (SPE) surface, have been studied with several redox mediators by cyclic voltammetry (CV). The efficient entrapment of laccase in the PAP layer was confirmed by determination of both kinetic parameters (maximum current and Michaelis–Menten apparent constant) and analytical performances by chronoamperometry. The Laccase-modified MWCNTs electrode provides an effective biosensor for determination of polyphenols and catecholamines in real matrices; performances of the considered biosensors for real samples analysis are also compared and discussed.     

HPLC-ESI-MS and MS/MS structural characterization of multifucosylated N-glycoforms of the basic proline-rich protein IB-8a CON1+ in human saliva

This study describes the characterization of the glycan moieties and the peptide backbone of six glycoforms of IB-8a CON1(+), a basic proline-rich protein present in human saliva. MS analyses on the intact glycoproteins before and after N-deglycosylation with PNGase F and high-resolution MS/MS sequencing by LTQ Orbitrap XL of peptides and glycopeptides from tryptic digests allowed the structural characterization of the glycan moieties and the polypeptide backbone, as well as to establish the glycosylation site at the asparagine residue at 98th position. Five of the glycoforms carry a biantennary N-linked glycan fucosylated in the innermost N-acetylglucosamine of the core and showing from zero to four additional fucoses in the antennal region. The sixth glycoform carries a monoantennary monofucosylated oligosaccharide. The glycoform cluster was detected on 28 of 71 adult saliva specimens. Level of fucosylation showed interindividual variability with the major relative abundance for the trifucosylated glycoform. Nonglycosylated IB-8a CON1(+) and the variant IB-8a CON1(-), lacking of the glycosylation site, have been also detected in human saliva.     

Further insights on the high-low spin interconversion in nickel(II) tetramine complexes. Solvent and temperature effects

The spin interconversion equilibrium involving the [Ni(II)(cyclam)]2+ complex has been investigated in a variety of polar solvents, at varying temperatures. The greater the donor tendencies of the solvent, the higher the endothermicity of the high-to-low-spin conversion. In particular, a positive linear relationship exists between DeltaHdegrees and Gutmann's Donor Number (DN). In the same way, higher donor tendencies of the solvent favour the occurrence of the Ni(II)-to-Ni(III) oxidation process and negative linear relationship has been found between the E1/2(Ni(III)/Ni(II)) and DN. General behaviour is related to the intensity of the metal-solvent axial bonds in the octahedrally elongated cyclam complexes (of both Ni(II) and Ni(III)).     

Olive mill wastewater treatment by a pilot-scale subsurface horizontal flow (SSF-h) constructed wetland

Performances of a pilot-scale reed bed for the olive mill wastewater (OMW) treatment were investigated, by monitoring influent and effluent pH, total suspended solids (TSS), chemical oxygen demand (COD), total Kjeldahl nitrogen (TKN), total phosphorus and polyphenols. In order to reduce the suspended matter concentration and to avoid clogging, OMW was pre-treated by adding lime putty, calcium hydroxide and hydraulic lime. The best results were obtained with 2 g/L of hydraulic lime. Pre-treated OMW was dosed in the reed bed at dilution ratios of 1/3 and 1/10 (v/v), pointing up that the latter only did not give rise to reed suffering and allowed to obtain good and durable removal efficiencies, above all for COD (74.1+/-17.6%) and polyphenols (83.4+/-17.8%). Recycling of the effluent was quite effective for the improvement of the wastewater quality, allowing a further removal of 26-70%, depending on the parameter taken into account. A post-dosage study, carried out by feeding the reed bed with the effluent of an activated sludge plant, pointed up a rapid decreasing of the outlet concentrations of the investigated parameters to values compatible with Italian regulations concerning wastewater discharge in surface water. Polyphenols were the exception, being their outlet concentration at the end of post-dosage study around 2 mg/L.     

Hydrophobic interaction chromatography coupled with atomic fluorescence spectrometric detection Effect of the denaturation on the determination of thiolic proteins

Hydrophobic interaction chromatography coupled online with chemical vapour atomic fluorescence spectrometry (HIC-CVGAFS) has been optimized for the analysis of thiolic proteins in denaturing conditions. Proteins are pre-column simultaneously denatured and derivatized in phosphate buffer solution containing 8.0 mol dm⁻³ urea and p-hydroxymercurybenzoate (PHMB) and the derivatized denatured proteins are separated on a silica HIC Eichrom Propyl column in the presence of 8.0 M urea in the mobile phase. Post-column online reaction of derivatized denatured proteins with bromine, generated in situ by KBr/KBrO₃ in HCl medium, allowed the fast conversion of the uncomplexed PHMB and of the PHMB bound to proteins to inorganic mercury also in presence of urea. Hg²⁺, present in solution as Hg²⁺-urea complex, is selectively detected by AFS in a Ar/H₂ miniaturized flame after sodium borohydride reduction to Hg. Under optimized conditions, online bromine treatment gives a 100±2% recovery of both free and protein-complexed PHMB. Denatured glyceraldehyde-3-phosphate dehydrogenase, aldolase, lactate dehydrogenase, trioso phosphate isomerase and β-lactoglobulin have been examined. As the sensitivity and limit of detection of proteins in the HIC-CVGAFS apparatus depends on number of SH groups reacting with PHMB, the denaturation process, which increases the number of PHMB-reactive thiolic groups in proteins, improves the analytical performances of the described system in protein analysis. The detection limit for the denatured proteins examined was found in the range of 10⁻¹⁰-10⁻¹² mol dm⁻³, depending on the considered protein, with linear calibration curves spanning over four decades of concentration.     

Pyridinium/urea-based anion receptor: methine formation in the presence of basic anions

The influence of the positively charged N-methylpyridinium substituent on the anion binding tendencies of urea-based receptors has been investigated by comparing molecules 1 and 2. These receptors have been studied in acetonitrile, by performing UV-vis. and (1)H NMR titrations with several anions. UV-vis. titrations have also been performed in DMSO, MeOH and CHCl(3)/CH(3)CN mixture (1/1, v/v). In the case of 1, the presence of both H-donor and H-acceptor groups (urea and pyridine, respectively) favours aggregation and the formation of dimers in the solid state. In solution, this tendency to aggregate reduces affinity for anions with respect to the similar urea-based receptor 3. The methylation of the pyridyl group of 1 leads to the pyridinium-containing receptor 2. The pyridinium positive charge enhances the acidity of urea and increases anion affinity, as evidenced by the comparison of the binding constants. Both receptors (1-2) form stable adducts with all investigated anions. However, in the case of 2, the formation of 1?:?1 adducts with basic anions, such as acetate and fluoride, is followed by a proton transfer process. Quite interestingly, deprotonation does not involve the urea group, thus preserving the 1?:?1 adduct, as demonstrated by the (1)H NMR measurements. In particular, the proton transfer process takes place at the methylene group linking the pyridinium fragment to the receptor's skeleton. (1)H NMR studies indicate the formation of a stable neutral methine species, characterised by the loss of aromaticity by the pyridyl ring. These results open new perspectives in the field of anion recognition, as receptor 2 may by applied to the monitoring of both bound anion (through the urea unit) and excess anion in solution (through the development of the yellow methine species).     

QuEChERS sample preparation for the determination of pesticides and other organic residues in environmental matrices: a critical review

Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) is an extraction and clean-up technique originally developed for recovering pesticide residues from fruits and vegetables. Since its introduction, and until December 2013, about 700 papers have been published using the QuEChERS technique, according to a literature overview carried out using SciFinder, Elsevier SciVerse, and Google search engines. Most of these papers were dedicated to pesticide multiresidue analysis in food matrices, and this topic has been thoroughly reviewed over recent years. The QuEChERS approach is now rapidly developing beyond its original field of application to analytes other than pesticides, and matrices other than food, such as biological fluids and non-edible plants, including Chinese medicinal plants. Recently, the QuEChERS concept has spread to environmental applications by analyzing not only pesticides but also other compounds of environmental concern in soil, sediments, and water. To the best of our knowledge, QuEChERS environmental applications have not been reviewed so far; therefore, in this contribution, after a general discussion on the evolution and changes of the original QuEChERS method, a critical survey of the literature regarding environmental applications of conventional and modified QuEChERS methodology is provided. The overall recoveries obtained with QuEChERS and other extraction approaches (e.g., accelerated solvent extraction, ultrasonic solvent extraction, liquid/solid extraction, and soxhlet extraction) were compared, providing evidence for QuEChERS higher recoveries for various classes of compounds, such as biopesticides, chloroalkanes, phenols, and perfluoroalkyl substances. The role of physicochemical properties of soil (i.e., clay and organic carbon content, as well as cation exchange capacity) and target analytes (i.e., log K_OW, water solubility, and vapor pressure) were also evaluated in order to interpret recovery and matrix effect data.