Crystal,molecular and electronic structure of 1,1-diaryl-2-halogenoethylenes

On the basis of semiempirical calculations, the conformation of the isolated molecule of 2-bromo-1,1-diphenylprop-1-ene corresponding to the minimum of total energy was determined. Assuming some information on the localization of the molecules in the crystal, also the conformation in a theoretical crystal was studied. The results have been compared with the crystal structure of 2-bromo-1,1-diphenylprop-1-ene, as obtained by X-ray diffraction. From the comparison a slight displacement of the C2 atom was suggested.

---

Zusammenfassung Die dem Minimum der Gesamtenergie entsprechende Konformation des isolierten Moleküls von 2-Brom-1,1-diphenylprop-1-en wurde durch halb-empirische Methoden bestimmt. Gewisse Ergebnisse über die Anordnung der Moleküle im Kristall machten es möglich, die Konformation in einem theoretischen Kristall zu untersuchen. Nach Vergleich der Resultate mit der durch Röntgen-Analyse bestimmten Kristallstruktur des 2-Brom-1,1-diphenylprop-1-en wurde eine kleine Verschiebung des C2-Atoms vorgeschlagen.

---

Résumé Par le moyen de calculs semiempiriques on a déterminé la conformation de la molécule isolée de 2-bromo-1, 1-diphénilprop-1-ène, correspondant au minimum d'énergie totale. On a aussi étudié la conformation dans le cristal théorique en se basant sur des informations concernant la localisation des molécules dans le cristal. On a comparé ces résultats avec ceux que nous avons obtenus par la détermination de la structure cristalline du 2-bromo-1, 1-diphénilprop-1-ène avec la diffraction des rayons X: cette comparaison nous a porté à déplacer un petit peu l'atome C 2.

---

---

This work was supported by a grant from the Italian Consiglio Nazionale delle Ricerche.     

Stabilization of γ‘ phase in Bi<Subscript>4</Subscript>V<Subscript>2-x</Subscript>Fe<Subscript>x</Subscript><Superscript>II</Superscript>O<Subscript>11-1.5x</Subscript> series

Summary This work reports the room-temperature stabilization of the Bi₄V_2-xFe_x^IIO_11-1.5x γ ‘ phase, a promising ionic conductive material that finds application in solid oxide fuel cell and oxygen sensor devices. The Fe(II) cation proved to be a better stabilizer than Fe(III), which was previously used, since a lower substitution degree of V⁵⁺ is needed for the former. Powder X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry were used in these experiments.     

Trennung,Identifizierung und Bestimmung von Bactericiden auf der Basis von halogenierten Aromaten mittels Gas-Chromatographie

The separation of a mixture of 22 bactericides has been achieved by gas chromatography on columns with silicone rubber W-982 as stationary phase with temperatures between 100° and 300°C. The unchanged compounds as well as their silylation products have been used. The latter are more conveniently used especially for the quantitative determination. To be able to calculate the retention indices after Kovats gas chromatography has been performed isothermally at 180°C for the more volatile compounds and at 250°C for all other bactericides.The retention indices obtained under these conditions are tabulated together with the limits of detection.     

2-Amino-4-bromobutanoic Acid

(2S)- and (2R)-2-Amino-4-bromobutanoic acid were prepared starting from N-Boc-glutamic acid α tert-butyl ester. The double tert-butyl protection was necessary to prevent a partial racemisation during Barton’s radical decarboxylation used to transform the γ-carboxylic group into a bromide. This bromide reacted with different nitrogen, oxygen and sulphur nucleophiles to give nonnatural amino acids characterised by basic or heterocyclic side chains. The title compound was also used to prepare a conformationally constrained peptidomimetic.     

Low-Cost Potentiometric Sensor for Chloride Measurement in Continuous Industrial Process Control

Recently, the new updates in legislation about drinking water control and human health have increased the demand for novel electrochemical low-cost sensors, such as potentiometric ones. Nowadays, the determination of chloride ion in aqueous solutions has attracted great attention in several fields, from industrial processes to drinking water control. Indeed, chloride plays a crucial role in corrosion, also influencing the final taste of beverages, especially coffee. The main goal is to obtain devices suitable for continuous and real-time analysis. For these reasons, we investigated the possibility to develop an easy, low-cost potentiometric chloride sensor, able to perform analysis in aqueous mediums for long immersion time and reducing the need of periodic calibration. We realized a chloride ion selective electrode made of Ag/AgCl sintered pellet and we tested its response in model solutions compatible with drinking water. The sensor was able to produce a stable, reproducible, and accurate quantification of chloride in 900 s, without the need for a preliminary calibration test. This opens the route to potential applications of this sensor in continuous, in situ, and real time measurement of chloride ions in industrial processes, with a reduced need for periodic maintenance.     

A molecular mechanics approach for analyzing tensile nonlinear deformation behavior of single-walled carbon nanotubes

In this paper, by capturing the atomic information and reflecting the behaviour governed by the nonlinear potential function, an analytical molecular mechanics approach is proposed. A constitutive relation for single-walled carbon nanotubes (SWCNT’s) is established to describe the nonlinear stress-strain curve of SWCNT’s and to predict both the elastic properties and breaking strain of SWCNT’s during tensile deformation. An analysis based on the virtual internal bond (VIB) model proposed by P. Zhang et al. is also presented for comparison. The results indicate that the proposed molecular mechanics approach is indeed an acceptable analytical method for analyzing the mechanical behavior of SWCNT’s. The project supported by the National Natural Science Foundation of China (10121202, 90305015 and 10328203), the Key Grant Project of Chinese Ministry of Education (0306) and the Research Grants Council of the Hong Kong Special Administrative Region, China (HKU 7195/04E).     

Preparation of nano-hydroxyapatite/poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide) biocomposite microspheres

Nano-hydroxyapatite (HA)/poly(l-lactide) (PLLA) composite microspheres with relatively uniform size distribution were prepared by a solid-in-oil-in-water (s/o/w) emusion solvent evaporation method. The encapsulation of the HA nanopaticles in microshperes was significantly improved by grafting PLLA on the surface of the HA nanoparticles (p-HA) during emulsion process. This procedure gave a possibility to obtain p-HA/PLLA composite microspheres with uniform morphology and the encapsulated p-HA nanoparticle loading reached up to 40 wt% (33 wt% of pure HA) in the p-HA/PLLA composite microspheres. The microstructure of composite microspheres from core-shell to single phase changed with the variation of p-HA to PLLA ratios. p-HA/PLLA composite microspheres with the diameter range of 2–3 μm were obtained. The entrapment efficiency of p-HA in microspheres could high up to 90 wt% and that of HA was only 13 wt%. Surface and bulk characterizations of the composite microspheres were performed by measurements such as wide angle X-ray diffraction (WAXD), thermal gravimetric analysis (TGA), environmental scanning electron microscope (ESEM) and transmission electron microscopy (TEM).     

Analysis of Organic Compounds in Antarctic Snow and Their Origin

Abstract

Organic compounds extractable with n-hexane were identified and quantitatively determined in pack, surface and deep snow samples taken at different depths and collected at several altitudes above sea level from Antarctica during the 1993/94 Italian expedition. The comparison between the composition of organic compounds in snow and the ones in pack and sea-water samples pointed out that the three matrices substantially contain the same biogenic and anthropogenic organic compounds. The contribution of marine aerosol to organic content in the snow is confirmed by the enrichment ratios calculated for the more representative classes of identified compounds (n-alkanes, phthalates and low molecular weight alkylbenzenes). The changes in the composition of organic compounds in snow as the altitude increases seem to depend on the dimensional spectrum of the aerosol. Thus, smallest particles, richest in surfactant material, reach the highest altitudes.     

The effect of drying method on the properties and nanoscale structure of cellulose whiskers

Cellulose whiskers were prepared from wood- and cotton-based microcrystalline cellulose and dried by two methods: freeze-drying or air-drying. The effect of drying method on the properties and structure of the whiskers were studied. Furthermore, the influence of the source of cellulose on the nanoscale structure was investigated. Drying method was observed to slightly influence the thermal stability of cellulose whiskers, whereas the char residue varied significantly depending on the drying process performed. Small- and wide-angle X-ray scattering and solid state nuclear magnetic resonance spectroscopy were used to examine the crystallinity and nanoscale structure of the dried whiskers. It was observed that the crystal structure and crystallinity of cellulose whiskers remained during all treatments, whereas their nanoscale structure was significantly influenced by drying method, neutralization, and source of cellulose. Relationships between thermal behavior and nanoscale structure were reported and discussed.