Click chemistry in materials synthesis. III. Metal‐adhesive polymers from Cu(I)‐catalyzed azide–alkyne cycloaddition

1,2,3‐Triazole‐based polymers generated from the Cu(I)‐catalyzed cycloaddition between multivalent azides and acetylenes are effective adhesive materials for metal surfaces. The adhesive capacities of candidate mixtures of azide and alkyne components were measured by a modified peel test, using a customized adhesive tester. A particularly effective tetravalent alkyne and trivalent azide combination was identified, giving exceptional strength that matches or exceeds the best commercial formulations. The addition of Cu catalyst was found to be important for the synthesis of stronger adhesive polymers when cured at room temperature. Heating also accelerated curing rates, but the maximum adhesive strengths achieved at both room temperature and high temperature were the same, suggesting that crosslinking reaches the same advanced point in all cases. Polytriazoles also form adhesives to aluminum, but copper is bound more effectively, presumably because active Cu(I) ions may be leached from the surface to promote crosslinking and adhesion. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5182–5189, 2007     

Complex morphology of melt-spun nylon-6 fibres investigated by 1H double-quantum-filtered NMR spin-diffusion experiments.

The complex morphology of high-speed melt-spun nylon-6 fibres hydrated with D2O was investigated using 1H double-quantum-filtered spin-diffusion NMR experiments. The magnetisation exchange from selected crystalline domains along the fibrils and interfibrils was simulated with the help of a three-dimensional solution of a spin-diffusion equation approximated by a product of one-dimensional analytical NMR signals, which correspond to a lamellar morphology. This allows to measure the sizes of crystalline and less-mobile amorphous domains along the fibrils, as well as the diameter of the fibrils and interfibril distances. A series of nylon-6 fibres with extreme values of winding speed and draw ratio was investigated. The changes detected in the domain size along the fibrils and interfibrils show the same trend in the data obtained from wide-angle X-ray diffraction and small-angle X-ray scattering.     

Ultraviolet photoemission spectroscopy of hydrogen complex deactivation on InP:Zn(1 0 0) surfaces

Ultraviolet photoemission spectroscopy is used to study the kinetics of the H-Zn complex deactivation in Zn doped InP(1 0 0). Hydrogen injected into the material electronically passivates the local carrier concentration. Reverse-biased anneals of the InP under ultra-high vacuum show a dramatic change in the work function of the material with increasing temperature. Spectral features are also shown to be sensitive to sample temperature. To our knowledge, we show the first view of hydrogen retrapping at the surface using photoemission spectroscopy. A simple photoelectron threshold energy analysis shows the state of charge compensation of the material.     

New ferroelectric and antiferroelectric liquid crystalline materials containing differing numbers of lactate units

A new series of chiral liquid crystalline materials having the same rigid core containing a keto group, and various numbers of ( S )-lactate groups in the chiral segment, has been synthesized and studied. All the compounds contain a branched terminal alkyl chain derived from ( S )-2-methylbutanol. The influence of the number of lactate units on mesogenic behaviour has been studied. All the compounds show the paraelectric SmA phase and the ferroelectric SmC * phase over rather wide temperature ranges. The antiferroelectric SmC * A phase was observed for the compound possessing two lactate groups.     

Evidence of shear-dependent boundary slip in newtonian liquids

The European Physical Journal E - The flow of Newtonian fluids was studied by directly measuring the hydrodynamic drainage force acting on a sphere approaching a flat surface. Our force...     

Axial anomaly and index of the overlap hypercube operator

The overlap hypercube fermion is constructed by inserting a lattice fermion with hypercubic couplings into the overlap formula. One obtains an exact Ginsparg-Wilson fermion, which is more complicated than the standard overlap fermion, but which has improved practical properties and is of current interest for use in numerical simulations. Here we deal with conceptual aspects of the overlap hypercube Dirac operator. Specifically, we evaluate the axial anomaly and the index, demonstrating that the correct classical continuum limit is recovered. Our derivation is non-perturbative and therefore valid in all topological sectors. At the non-perturbative level this result had previously only been shown for the standard overlap Dirac operator with Wilson kernel. The new techniques which we develop to accomplish this also for hypercubic kernels are of a general nature and have the potential to be extended to overlap Dirac operators with even more general kernels.Received: 27 October 2003, Published online: 25 February 2004     

High pressure elastic and plastic deformations of silica: In situ diamond anvil cell Raman experiments

Normal silica glass is usually referred to as low density amorphous silica as it can be converted to high density amorphous silica by a hydrostatic pressure (polyamorphic transition). In this work in situ Raman experiments are performed in a diamond anvil cell up to 18 GPa. The pressure effects on the structure of silica after successive compression decompression experiments are analyzed. The mode Grüneisen parameters corresponding to the elastic compression of high density amorphous silica are obtained and compared with those of normal silica. A reorganization of the high density amorphous silica below 3 GPa is evidenced.     

Dense amorphous packing of binary hard sphere mixtures with chemical order: The stability of a solute ordered approximant

Recently, Miracle proposed that the intermediate structure in metallic glasses could be usefully characterized as an ordered face centered cubic packing of solute-centered coordination clusters. In this paper we examine the stability of such solute ordered arrangements in binary hard sphere mixtures subject to density maximization through local particle moves.     

Specific features of the formation of submicron inclusion in Ti:sapphire

Specific features of the formation of submicron (70–300 nm) inclusions in Ti:sapphire (Al₂O₃:Ti) grown in a carbon-containing medium have been investigated. These inclusions are caused by deviation from the melt stoichiometry and are formed during the melt-crystal phase transition. These defects are submicropores containing excess aluminum and its suboxides; they can be destroyed by thermal loading of a crystal.     

Analysis of thermally induced multistable composites

This paper models the non-linear flexural response of laminates that have piecewise variation of lay-up in the planform, using finite element analysis. Attention is focused on the effects that thermal stresses have on the potential multiple shapes of a composite structure. Unsymmetric laminates may possess more than a single equilibrium configuration, and during the cool-down the solution thus bifurcates at a critical temperature. In static analyses, numerical solutions are often coaxed to converge into one or the other branch of the solution. A methodology to overcome this problem is presented. Such modelling is necessary to allow application of multistable composite within morphing aircraft structures as multistable composites could provide a viable solution for the realisation of shape-adaptable structures.