Synthesis of symmetrical and unsymmetrical 3,3-di(indolyl)indolin-2-ones under controlled catalysis of ionic liquids

Three ionic liquids, [BMIM][BF₄] doped with 60 mol % of LiCl ([BMIM][BF₄]-LiCl), N,N,N,N-tetramethylguanidinium trifluoroacetate (TMGT), and N,N,N,N-tetramethylguanidinium triflate (TMGT_f) were found useful as catalyst solvents for controlled 3-indolylation of isatins. Our investigation revealed that the reaction between isatin and indoles in [BMIM][BF₄]-LiCl or TMGT_f media stops at the step of addition of the two components providing 3-indolyl-3-hydroxyindolin-2-ones while the ionic liquid TMGT runs the reaction further through accompanying Friedel-Crafts substitution to afford symmetrical 3,3-di(indol-3-yl)indolin-2-ones. To take advantage of the difference between the effects of these ionic liquids on the reaction progress, we planned a two-step protocol for the efficient synthesis of unsymmetrical 3,3-di(indol-3-yl)indolin-2-ones.     

Computational NQR study of a boron nitride nanocone

Abstract  

The electronic structure of a boron nitride nanocone with 240° disclination, and some properties that derive from this structure, were studied by density-functional theory calculations. In the considered model there are only hexagonal rings, with the apex and mouth of the nanocone saturated by hydrogen atoms. The model was optimized, and then the nuclear quadrupole resonance parameters were calculated at the sites of ¹¹B and ¹⁴N nuclei. The results revealed that the nuclei in the boron nitride nanocone are divided into layers with similar electronic properties. The nuclei at the apex and mouth are very important for the electronic behavior of the nanocone, with ¹¹B playing the major role.     

A selective sensor for nanolevel detection of lead (II) in hazardous wastes using ionic-liquid/Schiff base/MWCNTs/nanosilica as a highly sensitive composite

An effective potentiometric sensor had been fabricated for the rapid determination of Pb²⁺ based on carbon paste electrode consisting of room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF₆), multiwalled carbon nanotubes (MWCNTs), nanosilica, synthesized Schiff base, as an ionophore, and graphite powder. The constructed nanocomposite electrode showed better sensitivity, selectivity, response time, response stability, and lifetime in comparison with typical Pb²⁺ carbon paste electrode for the successfully determination of Pb²⁺ ions in water and in waste water samples. The best response for nanocomposite electrode was obtained with electrode composition of 18% ionophore, 20% BMIM-PF₆, 49% graphite powder, 10% MWCNT, and 3% nanosilica. The new electrode exhibited a Nernstian response (29.76?±?0.10 mV decade^?1) toward Pb²⁺ ions in the range of 5?×?10^?9?C1.0?×?10^?1 mol L^?1 with a detection limit of 2.51?×?10^?9 mol L^?1. The potentiometric response of prepared sensor is independent of the pH of test solution in the pH range of 4.5?C8.0. It has quick response with response time of about 6 s. The proposed electrode show fairly good selectivity over some alkali, alkaline earth, transition, and heavy metal ions.     

Synthesis of pyrano[2,3-<Emphasis Type="Italic">c</Emphasis>]pyrazoles by ionic liquids under green and eco-safe conditions

Optimization of a green approach to the synthesis of pyrano[2,3-c]pyrazoles based on the one-pot, four-component condensation via a domino Knoevenagel/Michael/cyclization sequence was investigated. This method involved the evaluation of the activity of several ionic liquids (ILs) in various solvents. This one-pot, four-component reaction revealed simplicity, higher yield and lower toxicity advantages over a corresponding three-component method. The effect of reaction parameters including the type and amount of catalyst, type of solvent, reaction temperature and time were studied with respect to yield of pyrano[2,3-c]pyrazoles. Catalyst recyclability and time-saving aspects of the reaction suggest that this method presents real alternatives over conventional reaction protocols.     

Separation of trace amount of silver using dispersive liquid-liquid based on solidification of floating organic drop microextraction

In the present work, dispersive liquid-liquid microextraction based on solidification of floating organic drop was developed as a simple and rapid technique for separation of silver ions from aqueous samples. In this technique, 700 μL 0.02% of 5-(4'-dimethylamino benzyliden)-rhodanine (chelating agent) was added into the 10 mL analyte sample in a test tube and 30.0 μL 1-undecanol (extraction solvent) was injected shortly thereafter. The test tubes were sonicated, centrifuged and then some effective parameters on extraction and complex formation, such as type and volume of extraction and disperser solvent, pH, the amount of chelating agent and extraction time were optimized. The effect of the interfering ions on the analytes recovery was also investigated. The calibration graph was linear in the range of 0.10-10.0 ng mL(-1) with detection limit of 0.056 ng mL(-1) (n=8). The relative standard deviation (RSD) was ±4.3% (n=8, C=5.0 ng mL(-1)) and the enrichment factor was 250.0. The proposed method was applied for extraction and determination of silver in different water samples.     

Two-phase simulation of nanofluid flow in a heat exchanger with grooved wall

Journal of Thermal Analysis and Calorimetry - The aim of this paper is to achieve a smaller and cheaper heat exchanger with similar performance. To fulfill this demand, ANSYS-Fluent software and...     

Reducing Occupational Noise Propagated from Centrifugal Fan through Dissipative Silencers: A Field Study

Acoustic performance of dissipative silencer was evaluated to determine the effectiveness of perforated duct porosity and absorbent material density in reducing occupational noise exposure propagated from centrifugal fan. Design charts were applied to predict noise reduction and length of a dissipative silencer. Dissipative silencers with various punched duct porosity (14%, 30% and 40%) and sound absorbent density (80 Kg/m³, 120 Kg/m³, and 140 Kg/m³) were designed and fabricated. According to ISO9612 and ISO11820, noise level was measured before and after installing all nine test silencers at fixed workstations around the discharge side of a centrifugal fan in a manufacturing plant. On average, the noise level at the discharge side of a fan without silencer was measured to be 93.6 dBA, whereas it was significantly mitigated by 67.4 dBA to 70.1 dBA after installing all silencers. Dynamic insertion loss for a dissipative silencer with 100 cm length was predicted to be 27.9 dB, which was in agreement with experimental ones. Although, there was no significant differences between insertion loss of silencers, the one with 30% porosity and 120 Kg/m³ rock wool density had the highest insertion loss of 26.2 dBA. Dissipative silencers noticeably reduced centrifugal fan noise exposures. Increasing sound absorbent density and duct porosity up to a certain limit could probably be effective in noise reduction of dissipative silencers.     

Degrees of Freedom of a K-User Interference Channel in the Presence of an Instantaneous Relay

In this paper, we study the degrees of freedom (DoF) of a frequency-selective K-user interference channel in the presence of an instantaneous relay (IR) with multiple receiving and transmitting antennas. We investigate two scenarios based on the IR antennas’ cooperation ability. First, we assume that the IR receiving and transmitting antennas can coordinate with each other and that the transmitted signal of each transmitting antenna can depend on the received signals of all receiving antennas, and we derive lower and upper bounds for the sum DoF of this model. In an interference alignment scheme, we divide receivers into two groups called clean and dirty receivers. We design our scheme such that a part of the messages of clean receivers can be de-multiplexed at the IR. Thus, the IR can use these message streams for an interference cancellation at the clean receivers. Next, we consider an IR, the antennas of which do not have coordination with each other and where the transmitted signal of each transmitting antenna depends only on the received signal of its corresponding receiving antenna. We also derive lower and upper bounds for the sum DoF for this model of IR. We show that the achievable sum DoF decreases considerably compared with the coordinated case. In both of these models, our schemes achieve the maximum K sum DoF if the number of transmitting and receiving antennas is more than a finite threshold.     

修饰的多壁碳纳米管糊电极用于生物与制药样品中苄丙酮香豆素电催化氧化和测定

采用一种简单灵敏的方法开发了在多壁碳纳米管修饰的ZnCrFeO4糊电极(MWCNTs/ZnCrFeO4/CPE)表面测定苄丙酮香豆素的新型传感器.运用循环伏安法、差示脉冲伏安法、计时电流法和电化学阻抗谱考察了该化学修饰电极上苄丙酮香豆素的电化学性能.结果表明,MWCNTs/ZnCrFeO4/CPE电极对苄丙酮香豆素氧化表现出较高的电催化活性,在pH=4时,产生峰值氧化电流约0.97 vs Ag/AgCl参比电极.当苄丙酮香豆素浓度在0.02-920.0 μmol/L范围内,该峰电流与其呈线性关系,检测极限(3σ)为0.003 μmol/L.另外,运用差示脉冲伏安法测定了MWCNTs/ZnCrFeO/CPE电极上苄丙酮香豆素的催化反应速率常数和扩散系数.