Lanthanum-selective sensors based on 3-amino-2-mercapto-3H-quinazolin-4-one in PVC matrix

A new solvent polymeric membrane (PME) and coated graphite (CGE) electrodes based on 3-amino-2-mercapto-3H-quinazolin-4-one as a suitable carrier for La(III) ion are described. The sensors exhibited a Nernstian response for La(III) ion over a wide concentration range (3.0 × 10^?7 to 1.0 × 10^?1 M for PME and 1.0 × 10^?7 to 1.0 × 10^?1 M for CGE) with a slope of 20.1 ± 0.3 (PME) and 23.4 ± 0.4 (CGE) mV decade^?1. The lower detection limits by PME and CGE were 2.0 × 10^?7 and 7.1 × 10^?8 M, respectively. The potentiometric response of the proposed electrodes was independent of the pH of the test solution in the pH range 3.0–9.0 with a fast response time (<10 s). The applications of prepared sensors were demonstrated in the determination of lanthanum ions in spiked water sample and also utilized for indirect determination of fluoride content of two mouth wash preparation samples.     

Homogeneous Liquid–Liquid Microextraction Via Flotation Assistance (HLLME-FA) Method for the Pretreatment of Organochlorine Pesticides in Aqueous Samples and Determination by GC–MS

This work proposes a new, rapid and simple homogeneous liquid–liquid microextraction via flotation assistance technique for the analysis of six organochlorine pesticides in water samples. A special extraction cell was used to facilitate collection of the low-density solvent extract. No centrifugation was required in this procedure. Determination was carried using gas chromatography–mass spectrometry. The water sample solution was then added into the extraction cell containing appropriate mixture of extract and homogeneous solvents. In the first step, a homogeneous solution and then with the continuation of water sample injection, a cloudy solution was formed. Using air flotation, the organic solution was collected at the conical part of the designed cell. The optimized levels of effective parameters were found based on response surface methodology approach. Applying the optimized conditions to the system understudy, the limits of detection of all target analytes were obtained in the range of 1.4–7 ng mL^?1, while the precisions were found to be in the range of 11.08–14.87 (RSD, n = 3). The linearity of the method lay in the range of 10–150 ng mL^?1 with the coefficients of correlation (r ² ) ranging from 0.998 to 0.999.     

Evaluation of the corrosion inhibition effect of micro/nanocapsulated polymeric coatings: a comparative study by use of EIS and Tafel experiments and the area under the Bode plot

In this paper we propose an approach for ranking self-healing polymeric coatings containing micro/nanocapsules in order of corrosion-protection effectiveness on exposure to 3.5 % (w/w) NaCl solution. The results indicated that development of electrochemical cells was inhibited by the active components of the ruptured embedded inhibitor micro/nanocapsules which were released into a scratch inflicted in the polymeric coating on steel surface. Undamaged surface film of test and control specimens exposed to the solution had excellent corrosion-inhibition performance, as reflected by results from both electrochemical impedance spectroscopy and polarization tests. Moreover, three coatings containing capsules synthesized at three different agitation rates with the same thickness were compared to determine the optimum rate. For the optimum rate the optimum thickness was then determined. The areas under Bode plots were determined and used as useful values for evaluation and ranking the coatings. It was found that the area under the Bode plot is a good criterion for evaluating polymeric coating degradation during immersion. There was good agreement between the results of this work and those from electrochemical tests.     

“Grafting through” approach for synthesis of polystyrene/silica aerogel nanocomposites by in situ reversible addition-fragmentation chain transfer polymerization

Aerogel/polystyrene nanocomposites with mixed free and aerogel-attached polystyrene chains were synthesized using reversible addition-fragmentation chain transfer (RAFT) polymerization. 3-methacryloxypropyldimethylchlorosilane containing a double bond, which could be incorporated into polystyrene chains by a “grafting through” approach, was used as an aerogel modifier. Kinetics of RAFT polymerization of styrene in the presence of modified silica aerogel was studied by monitoring conversion and molar mass values. To further study, attached polymers were detached and their molecular characteristics were compared to free chains. According to results, the presence of silica aerogel particles has a sensible influence on polymerization kinetic and more aerogels result in decreased polymerization rate and conversion. The dispersity (Ð) of polymer chains increased by the addition of silica aerogel. In the case of aerogel-attached polystyrene chains, number-averaged molar mass values were slightly lower than that of free chains. Also, thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) techniques were used to observe the effect of loading on thermal properties of synthesized nanocomposites.     

Batch and continuous fixed-bed column biosorption of thorium(IV) from aqueous solutions: equilibrium and dynamic modeling

Biosorption of thorium(IV) from aqueous solution by Cystoseira indica alga was investigated in batch and fixed-bed column experiments. In the batch study the effects of pH and initial concentration were investigated. The optimum pH for Th(IV) biosorption was found to be 3.5. The experimental isotherms obtained at different pH conditions were analyzed using three two-parameter models and three three-parameter models. Among the two-parameter models the Langmuir model and among the three-parameter models the Redlich–Peterson model vividly described the equilibrium data. The results showed that C. indica alga is a homogeneous biosorbent and Th(IV) biosorption is a favorable and physical process. The maximum biosorption capacity from the Langmuir model was 151.3, 195.7 and 120.6 mg/g at pH 2.5, 3.5 and 4.5, respectively. The continuous isotherm obtained from the column data was modeled by the Langmuir model and the maximum biosorption capacity was 283.8 mg/g. The experimental data were fitted by the use of an analytical and a numerical model, namely Clark and mass transfer models. The results showed that the mass transfer model adequately described the experimental data. Sensitivity analysis revealed that the value of k _in has more effect than the axial dispersion coefficient (D _z) on the shape of breakthrough curve.     

Analysis of xylene in aqueous media using needle‐trap microextraction with a carbon nanotube sorbent

This paper describes a new extraction technique with needles and a sorbent based on carbon nanotubes to analyze trace amounts of three isomers of xylenes in aqueous samples. In this research, results have been compared with one commercial sorbent. The synthesized sorbent was prepared using sol–gel technology and was packed into 20 gauge needles, and the same size needle was used for packing the commercial sorbent. In the extraction process, a purge and trap sampling methodology is developed, so purging and trapping cycles were performed by a sampling pump. Optimized conditions for standard xylene samples have been obtained, and eight urine samples from workers that were exposed to xylene in the workplace were collected and analyzed. Experimental parameters such as limits of detection and quantification were investigated, and these two parameters were <1 μg/L.     

Potentiometric and spectroscopic studies of three new mixed inorganic–organic hybrid materials based on Preyssler and Wells–Dawson heteropolyoxometalates containing proline, leucine, and asparagine

Three new organic–inorganic hybrid materials based on two important heteropolyoxometalates namely Preyssler (=K_12.5H_1.5[Na(H₂O)P₅W₃₀O₁₁₀]·35H₂O) and Wells–Dawson (=K₆[P₂W₁₈O₆₂]·10H₂O) anions, namely, (Hpro)₉(Hleu)₃K₂[Na(H₂O)P₅W₃₀O₁₁₀]·25H₂O (1), (Hpro)₄(Hasp)[HP₂W₁₈O₆₂]·20H₂O (2), and (Hpro)₁₁K₃[Na(H₂O)P₅W₃₀O₁₁₀]·18H₂O (3) where pro, leu, and asp are proline, leucine, and asparagine, respectively, were prepared and identified by elemental analysis, infrared and proton nuclear magnetic resonance spectroscopies, and thermogravimetric analysis. The hybrid materials are made up of positively charged amino acids, [Na(H₂O)P₅W₃₀O₁₁₀]^14? and [P₂W₁₈O₆₂]^6? anions, and H₂O molecules of crystallization. These constituents’ fragments held together into a three-dimensional supermolecular network through non-covalent interactions. The protonation constants of the amino acids used, and Preyssler and Wells–Dawson species in all possible protonated forms, the equilibrium constants for binary systems of proline–asparagine and proline–leucine, and the stoichiometry and stability constants of the corresponding binary and ternary hybrids with Preyssler and Wells–Dawson heteropolyoxometalates in aqueous solution were investigated by potentiometric pH titration method. The stoichiometries of the most hybrid species in solution were compared with the corresponding hybrids in the solid phase, in detail.     

Novel and versatile methodology for synthesis of β-aryl-β-mercapto ketone derivatives as potential urease inhibitors

The objective was to obtain new scaffold of compounds possessing anti-urease activity. For this new and simple method for the synthesis of β-aryl-β-mercapto ketone derivatives based on Michael addition of thiophenol to chalcones in an ionic liquid as a solvent was improved. The products were obtained in good to moderate yields with high purity and characterized by spectral and elemental analyses. The activities of synthesized compounds were investigated as new inhibitors of jack bean urease. Among 22 synthesized compounds, all of them have shown inhibitory effect in micromolar range, and the most potent one has IC₅₀ = 6 μM compared to hydroxyurea IC₅₀ = 100 μM as a reference inhibitor. A docking study was performed using Autodock 4.2 in parallel to in vitro experiments to illustrate the corresponded binding affinities as well as binding site, and involved residues in interaction. These computational results complimented the experimental inhibition activity and enabled us to report a potent urease inhibitors based on β-aryl-β-mercapto ketone scaffold.     

Application of gold-labeled antibody biosensor in simultaneous determination of total aflatoxins using artificial neural network

Preparation of antibody-coated gold nanoparticles (GNPs) specific to aflatoxins B1, B2, G1 and G2 and its use in developing aflatoxins diagnostic method were presented in this paper. The formation of gold-labeled antibodies was accomplished at optimal condition. Due to severe overlapping between the emission profiles for the aflatoxins, they cannot be determined by direct inspection of data. The strategy used in this study, constituted by artificial neural network (ANN), was easy to implement and to originate reliable results. ANN can be successfully applied to spectrofluorimetric spectra matrices to simultaneous determination of total aflatoxins. Quantitative results obtained using ANN method for aflatoxins in pistachio nuts samples were compared to those obtained using the HPLC method. Obtained results using these two methods did not show significant differences.