Inside-tube solid-phase microextraction as an interlink between solid-phase microextraction and needle device for n-hexane evaluation in air and urine headspace

Monitoring the trace amount of chemicals in various samples remains a challenge. This study was conducted to develop a new solid-phase microextraction (SPME) system (inside-tube SPME) for trace analysis of n-hexane in air and urine matrix. The inside-tube SPME system was prepared based on the phase separation technique. A mixture of carbon aerogel and polystyrene was loaded inside the needle using methanol as the anti-solvent. The air matrix of n-hexane was prepared in a Tedlar bag, and n-hexane vapor was sampled at a flow rate of 0.1 L/min. Urine samples spiked with n-hexane were used to simulate the sampling method. The limit of detection using the inside-tube SPME was 0.0003 μg/sample with 2.5 mg of adsorbent, whereas that using the packed needle was 0.004 μg/sample with 5 mg of carbon aerogel. For n-hexane analysis, the day-to-day and within-day coefficient variation were lower than 1.37%, with recoveries over 98.41% achieved. The inside-tube SPME is an inter-link device between two sample preparation methods, namely, a needle trap device and an SPME system. The result of this study suggested the use of the inside-tube SPME containing carbon aerogel (adsorbent) as a simple and fast method with low cost for n-hexane evaluation.     

The Zinc(II) Coordination Polymer with Mixed-Ligand of 4-Hydroxypyridine-2,6-dicarbolic Acid and Benzene-1,2,4,5-tetracarboxylic Acid in the Presence of Piperazine as a Counter Ion: Synthesis,Crystal Structure and Solution Study

Journal of Chemical Crystallography - Mixed-ligand zinc(II) complex, {(pipzH2)[Zn(hypydc)(btc)0.5]·H2O} n , (1) was prepared with 4-hydroxypyridine-2,6-dicarboxylic acid (hypydcH2),...     

Influence of chemical extraction conditions on the physicochemical and functional properties of polysaccharide gum from durian (Durio zibethinus) seed

Durian seed is an agricultural biomass waste of durian fruit. It can be a natural plant source of non-starch polysaccharide gum with potential functional properties. The main goal of the present study was to investigate the effect of chemical extraction variables (i.e., the decolouring time, soaking temperature and soaking time) on the physicochemical properties of durian seed gum. The physicochemical and functional properties of chemically-extracted durian seed gum were assessed by determining the particle size and distribution, solubility and the water- and oil-holding capacity (WHC and OHC). The present work revealed that the soaking time should be considered as the most critical extraction variable affecting the physicochemical properties of crude durian seed gum.     

Synthesis,Structural and Thermal Studies of a New Nickel Complex Containing 2-Aminopyrimidine and Thiocyanate Mixed Ligands with a Three-Dimensional Network Structure

Abstract  

A new nickel(II) complex formulated as, trans-[Ni(amp)₂(SCN)₂(H₂O)₂]·2H₂O (1), (amp = 2-aminopyrimidine) has been synthesized and characterized by elemental analysis, IR spectroscopy, its molecular and crystal structures were determined by X-ray crystal structure analysis and its thermal stability by TGA/DTA methods. 1 is a neutral complex and the central atom sits on an inversion center and is coordinated by two endocyclic nitrogen atoms of two 2-aminopyrimidine heterocycles, two oxygen atoms of two water molecules and two nitrogen atoms of SCN⁻ ions. 2-aminopyrimidine molecules, thiocyanate ions and water molecules are in trans position. Thermal methods confirm two co-crystallized water molecules in 1. π–π stacking interactions and extensive O–H···O, O–H···N, O–H···S and N–H···N hydrogen bonds contribute to the formation of a three-dimensional supramolecular structure. Crystal data for complex at 120 K: triclinic, space group P-1, a = 7.2026(14), b = 7.8332(15), c = 9.0270(17) ?, α = 67.694(3), β = 72.732(4), γ = 77.012(4), Z = 1, R ₁ = 0.0323.     

The influence of main emulsion components on the physicochemical properties of soursop beverage emulsions: A mixture design approach

The physicochemical properties of soursop beverage emulsion were investigated using mixture design. Results indicated that the regression models were significantly fitted for all response variables studied, except creaming index at 10°C. Interactions between biopolymers and oil phase had the most significant effect on creaming stability; however, modified starch played a much prominent role in maintaining the cloudiness and average droplet size. Meanwhile, WPI contributed significantly to the conductivity of the emulsions. The optimum condition resulted in desirable physicochemical properties could be achieved using 8.70% (w/w) modified starch, 1.02% (w/w) WPI, 10.11% (w/w) flavor oil, and 76.57% (w/w) water.     

Determination of monocyclic aromatic amines using headspace solid‐phase microextraction based on sol–gel technique prior to GC

In this research, the headspace solid‐phase microextraction (SPME) coupled with GC flame ionization detector was applied for the determination of some monocyclic aromatic amines in real water and urine samples. A sol–gel technique was applied for the preparation of the SPME fibers. Two different sol–gel coatings, (PEG and poly(ethylene glycol) modified with multi‐walled carbon nanotubes [PEG/CNTs]), were prepared and compared. Extraction efficiency of PEG/CNTs was better than PEG fiber in the same conditions. To obtain maximum extraction efficiency, some parameters such as desorption temperature and time, temperature and time of extraction, salt effect, pH, and stirring speed were investigated and optimized for PEG/CNTs fiber. Under optimized conditions, the LODs (S/N = 3) were in the range of 0.5–50 ng/L and limits of quantification (S/N = 10) were between 1 and 500 ng/L. Repeatability (n = 5) was in the range of 3.2–9.1% and reproducibility (n = 3) was obtained from 5.5 to 12.0%. The method was successfully applied to the analysis of real water and urine samples with recoveries from 63.7 to 97.0%.     

Synthesis and characterization of Si-Zr-Mo nanocomposite as a rapid and efficient catalyst for aromatization of Hantzsch 1,4-dihydropyridines

Nanocomposite of Silica-zirconia-molybdate designated as Si-Zr-Mo was prepared via the reaction of the in situ generated zirconium-tetra octanoxide [Zr(Oct)₄] through condensation of zirconium-tetra-n-butoxide and 1-octanol in a sol–gel method with sulfuric acid and tetraethylorthosilicate (TEOS) followed by grafting of MoO₄^2? on modified silico zirconia nanocomposite under reflux conditions. The prepared nanocomposite was characterized using inductively coupled plasma (ICP), N₂ sorption isotherms, transmission electron microscopy (TEM), and FT-IR spectroscopy. The as prepared nanocomposite had a surface area and pore dimension of 140 m²/g and 1.48 nm, respectively. The morphology of sulphated silico zirconia nanocomposite after immobilization MoO₄^2? has been changed from nanoparticles to nanaorods. It was found that the synthesized nanocomposite successfully catalyze the oxidative dehydrogenation of 1,4-dihydropyridines (1,4-DHPs) with 92–100% conversion and 80–100% selectivity toward the desired products.     

Kinetic-spectrophotometric determination of trace amounts of silver using the oxidation of thionine with peroxodisulfate.

A simple, rapid and sensitive method has been developed for determination of traces of silver(I) (0.2 - 13 ng mL(-1)) based on its catalytic effect on the oxidation of thionine by peroxodisulfate in the presence of 1 - 10 phenanthroline as an activator. The reaction is monitored spectrophotometrically by measuring the decrease in absorbance of thionine at 600 nm by the fixed time method. The detection limit is 0.098 ng mL(-1) and the relative standard deviation for 0.5, 3.0, 5.0 and 10 ng ml(-1) Ag(I) are 4.1, 1.37, 1.06 and 0.64%, respectively. The method is free from most interferences and it was applied to determination of silver in photographic solutions and well-water samples.     

Water-Soluble Rhenium Clusters with Triazoles: The Effect of Chemical Structure on Cellular Internalization and the DNA Binding of the Complexes

Here we explore the effect of the nature of organic ligands in rhenium cluster complexes [Re₆Q₈L₆]⁴⁻ (where Q=S or Se, and L=benzotriazole, 1,2,3-triazole or 1,2,4-triazole) on the biological properties of the complexes, in particular on the cellular toxicity, cellular internalization and localization. Specifically, the study describes the synthesis and detailed characterization of the structure, luminescence and electrochemical properties of the four new Re₆ clusters with 1,2,3- and 1,2,4-triazoles. Biological assays of these complexes are also discussed in addition to those with benzotriazole using cervical cancer (HeLa) and immortalized human fibroblasts (CRL-4025) as model cell lines. Our study demonstrates that the presence of hydrophobic and π-bonding rich units such as the benzene ring in benzotriazole significantly enhances cellular internalization of rhenium clusters. These ligands facilitate binding of the clusters to DNA, which results in increased cytotoxicity of the complexes.