Regeneratively mode-locked fiber laser with a repetition rate stability of 4.9x10-15 using a hydrogen maser phase-locked loop

We demonstrate an ultrastable regeneratively mode-locked fiber laser that employs a phase-locked loop (PLL) circuit with a hydrogen maser. The stability for an integration time of 1s was 6.2x10(-13), which is 16 times better than that of a conventional PLL laser. For an integration time of 1000s, the stability reached as high as 4.9x10(-15). The repetition-rate stability was limited by the synthesizer used for the PLL operation, and there was no additional fluctuation induced by the laser operation.     

Highly efficient monolithic silica capillary columns modified with poly(acrylic acid) for hydrophilic interaction chromatography

Monolithic silica capillary columns for hydrophilic interaction liquid chromatography (HILIC) were prepared by on-column polymerization of acrylic acid on monolithic silica in a fused silica capillary modified with anchor groups. The products maintained the high permeability (K=5 x 10(-14)m(2)) and provided a plate height (H) of less than 10 microm at optimum linear velocity (u) and H below 20 microm at u=6mm/s for polar solutes including nucleosides and carbohydrates. The HILIC mode monolithic silica capillary column was able to produce 10000 theoretical plates (N) with column dead time (t(0)) of 20s at a pressure drop of 20 MPa or lower. The total performance was much higher than conventional particle-packed HILIC columns currently available. The gradient separations of peptides by a capillary LC-electrospray mass spectrometry system resulted in very different retention selectivity between reversed-phase mode separations and the HILIC mode separations with a peak capacity of ca. 100 in a 10 min gradient time in either mode. The high performance observed with the monolithic silica capillary column modified with poly(acrylic acid) suggests that the HILIC mode can be an alternative to the reversed-phase mode for a wide range of compounds, especially for those of high polarity in isocratic as well as gradient elution.     

Texture of superfluid 3He probed by a Wigner solid

The resistivity of the Wigner solid floating on the free surface of superfluid 3He has been measured in both the A and B phases down to 200 microK in the magnetic field. The resistivity in the A phase shows the asymptotic behavior to the temperature-square dependence at low temperatures. The temperature dependence is successfully explained by the uniform l[over] texture oriented normal to the surface and by the specular scattering of quasiparticles excited along l[over] vector. In the B phase, the resistivity exhibits the exponential decrease at low temperatures. The steep increase of the resistivity observed at high magnetic field is attributable to the nonuniform texture of the field-distorted order parameter induced near the surface.     

Ultrafast photoinduced melting of a spin-Peierls phase in an organic charge-transfer compound, K-tetracyanoquinodimethane

Ultrafast photoinduced phase transition in a spin-Peierls (SP) system of K-tetracyanoquinodimethane (K-TCNQ) was studied by femtosecond (fs) reflection spectroscopy. Photocarriers destabilize the SP phase, resulting in a decrease in molecular dimerization within 400 fs. Such a melting of the SP phase drives three kinds of coherent oscillations. By comparing the oscillations with the Raman bands activated by the dimerization, we show that the oscillation of 20 cm-1 is due to an LO phonon, and it plays an important role for the stabilization of the SP phase.     

Effects of thermal treatments on the recovery of adsorbed water and photocatalytic activities of TiO2 photocatalytic systems

The effects of thermal treatments on the rehydration process and photocatalytic activity were investigated by 1H NMR spectroscopy for six anatase abundant TiO2 photocatalysts with different properties. Acetic acid and benzoic acid were employed for photodecomposition in aqueous suspension. After the calcinations at 973 K, physisorbed water layers recovered relatively fast for P25, F4, and AMT-600 (shorter than 24 h) with no significant enhancement of the photocatalytic decomposition. On the other hand, for ST-01, UV-100, and AMT-100, the recovery was very slow (longer than 1 week) and only partially reversible, and the photocatalytic decomposition was considerably enhanced but retarded with rehydration. In the presence of adsorbed water, the binding of a carboxyl group of the molecules with adsorbed water is considered to compete with the direct adsorption on the surface, which reduces the amount of the direct adsorption and results in the reduction in the photocatalytic efficiency. In addition, the photocatalytic decomposition of benzoic acid with an aromatic ring was much faster in all of the TiO2 aqueous suspensions and more enhanced for the fully dehydroxylated TiO2 than that of acetic acid. These results suggest that the most efficient photocatalytic sites should be the hydrophobic sites on the TiO2 surface. The difference among the rehydration rates of different TiO2 is discussed in terms of thermally induced changes of surface morphology.     

Parallel Fock matrix construction with distributed shared memory model for the FMO‐MO method

A parallel Fock matrix construction program for FMO‐MO method has been developed with the distributed shared memory model. To construct a large‐sized Fock matrix during FMO‐MO calculations, a distributed parallel algorithm was designed to make full use of local memory to reduce communication, and was implemented on the Global Array toolkit. A benchmark calculation for a small system indicates that the parallelization efficiency of the matrix construction portion is as high as 93% at 1,024 processors. A large FMO‐MO application on the epidermal growth factor receptor (EGFR) protein (17,246 atoms and 96,234 basis functions) was also carried out at the HF/6‐31G level of theory, with the frontier orbitals being extracted by a Sakurai‐Sugiura eigensolver. It takes 11.3 h for the FMO calculation, 49.1 h for the Fock matrix construction, and 10 min to extract 94 eigen‐components on a PC cluster system using 256 processors. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010     

Synthesis and crystal structure study of Y2O3 high-pressure polymorph

Single crystal high pressure polymorph of yttria was synthesized for the first time using a link–type cubic anvil apparatus. Crystal structure was refined from single crystal data. High pressure polymorph was confirmed as a monoclinic phase. Lattice parameters of the high pressure polymorph at room temperature and ambient pressure were determined as follows: a = 13.8714 Å, b = 3.4487 Å, c = 8.5862 Å, β = 100.12°.