Surface temperature measurement of dielectric materials heated by pulsed laser radiation

The temperature of a dielectric surface irradiated by a laser pulse can be measured by recording the time-resolved resistance change of a thin platinum stripe vapor-deposited on this surface. Results are reported for quartz and glass surfaces exposed to a pulsed CO₂ laser, showing heating rates in excess of 10⁸ K/s.     

Collision-energy dependence of HD(nu'=1,j') product rotational distributions for the H + D2 reaction

Product rotational distributions for the reaction H + D2 --> HD(nu'=1,j') + D have been measured for 16 collision energies in the range of 1.43 < or = E(coll) < or = 2.55 eV. Time-dependent quantum-mechanical calculations agree well in general with the experimental results, but they consistently yield slightly colder distributions. In terms of the average energy channeled into rotation, the differences between experiment and theory amount to approximately 10% for all collision energies sampled. No peculiarity is found for E(coll)=2.55 eV at which the system has sufficient energy to access the first HD2 electronically excited state.     

Insights into electrochemiluminescence dynamics by synchronizing real-time electrical,luminescence, and mass spectrometric measurements

Electrochemiluminescence (ECL) comprises a sophisticated cascade of reactions. Despite advances in mechanistic studies by electrochemistry and spectroscopy, a lack of access to dynamic molecular information renders many plausible ECL pathways unclear or unproven. Here we describe the construction of a real-time ECL mass spectrometry (MS) platform (RT-Triplex) for synchronization of dynamic electrical, luminescent, and mass spectrometric outputs during ECL events. This platform allows immediate and continuous sampling of newly born species at the Pt wire electrode of a capillary electrochemical (EC) microreactor into MS, enabling characterization of short-lived intermediates and the multi-step EC processes. Two ECL pathways of luminol are validated by observing the key intermediates α-hydroxy hydroperoxide and diazaquinone and unraveling their correlation with applied voltage and ECL emission. Moreover, a “catalytic ECL route” of boron dipyrromethene (BODIPY) involving homogeneous oxidation of tri-n-propylamine with the BODIPY radical cation is proposed and verified.

A real-time electrochemiluminescence mass spectrometry platform (RT-Triplex) was developed for revealing ECL mechanisms by synchronization of dynamic electrical, luminescent, and mass spectrometric signals at the electrode–electrolyte interface.     

Study on a novel thermoset nanocomposite form DGEBA–cycloaliphatic diamine and metal nanoparticles

The thermo-physical properties of diglycidyl ether of bisphenol A (DGEBA)/isophoronediamine (IPDA) with iron nanoparticles were investigated using DSC, DMT, and TG analysis. Because of the higher values of the glass transition, it is recognized that the optimum behavior of the three-component system corresponds to the 10% loading level of iron nanoparticles. The addition of iron nanoparticles into the epoxy matrix resulted in a significant increment in the storage modulus and crosslink density. Also, the DGEBA/IPDA/10% iron nanoparticles showed an enhanced thermal stability owing to the introduction of iron nanoparticles as reinforcing filler. Curing reaction of DGEBA/IPDA with 10% iron nanoparticles was investigated by DSC at dynamic mode. Activation energy was calculated based on Kissinger method (66.52 kJ mol^?1). Also, the advanced isoconversional method is utilized to describe the curing reaction process. In the dynamic DSC analyses, the curing kinetics could be successfully described with the two-parameter autocatalytic model (Sěsták–Berggren equation) and the overall reaction order was about 2.78.     

Synthesis,experimental, and DFT studies on FT-IR, 1H,and 13C NMR spectra of azo-linked dihydropyridines

An efficient one-pot synthesis of dihydropyridines by solid state three-component condensation reactions of aldehydes, dimedone, and ammonium acetate in the presence of HY-Zeolite has been achieved. The conversion took short time to form the products in excellent yields. HY-Zeolite can be recovered and reused. Density Functional Theory (DFT) calculations at the B3LYP level is used to optimize the geometry and calculate FT-IR, ¹H, and ¹³C NMR spectra of the compounds. We found that the calculated values are in accordance with the experimental data.     

Metal Hydrogen Sulfates Catalyzed Methoxymethylation of Alcohols under Solvent‐Free Conditions

Methoxymethylation of a variety of alcohols was performed by using formaldehyde dimethoxy acetal in the presence of metal hydrogen sulfate M(HSO₄)_n at room temperature and solvent‐free conditions. The methoxymethyl ethers (MOM‐ethers) were obtained with high yields and purity.     

Electrocatalytic Reduction of Dioxygen on the Surface of Glassy Carbon Electrodes Modified with Cobalt Porphyrin Complexes

The preparation and electrocatalytic behavior of glassy carbon electrodes modified with three different cobalt porphyrin complexes were investigated. The electrocatalytic ability of the modified electrodes for the reduction of dioxygen to hydrogen peroxide and water in air‐saturated aqueous solutions was examined by cyclic voltammetry and chronoamperometry techniques. The porphyrin‐adsorbed glassy carbon electrodes possess excellent electrocatalytic abilities for dioxygen reduction with overpotential about 0.5 V lower than that at a plain glassy carbon electrode. The experimental parameters were optimized and the mechanism of the catalytic process was discussed. The possible effects of the electron‐donating properties of groups in the meso‐position of the porphyrin ring were investigated.     

Synthesis and characterization of a novel organic–inorganic hybrid salt and its application as a highly effectual Brønsted–Lewis acidic catalyst for the production of N,N′‐alkylidene bisamides

In this research, a novel organic–inorganic hybrid salt, namely, N¹,N¹,N²,N²‐tetramethyl‐N¹,N²‐bis(sulfo)ethane‐1,2‐diaminium tetrachloroferrate ([TMBSED][FeCl₄]₂) was prepared and characterized by Fourier‐transform infrared spectroscopy (FT‐IR), energy‐dispersive X‐ray spectroscopy (EDX), elemental mapping, field emission scanning electron microscopy (FE‐SEM), X‐ray diffraction (XRD), thermal gravimetric (TG), differential thermal gravimetric (DTG), and vibrating‐sample magnetometry (VSM) analyses. Catalytic activity of the hybrid salt was tested for the synthesis of N,N′‐alkylidene bisamides through the reaction of benzamide (2 eq.) and aromatic aldehydes (1 eq.) under solvent‐free conditions in which the products were obtained in high yields and short reaction times. The catalyst was superior to many of the reported catalysts in terms of two or more of these factors: the reaction medium and temperature, yield, time, and turnover frequency (TOF). [TMBSED][FeCl₄]₂ is a Brønsted–Lewis acidic catalyst; there are two SO₃H groups (as Brønsted acidic sites) and two tetrachloroferrate anions (as Lewis acidic sites) in its structure. Highly effectiveness of the catalyst for the synthesis of N,N′‐alkylidene bisamides can be attributed to synergy of the Brønsted and Lewis acids and also possessing two sites of each acid.