Solid phase extraction of antidepressant drugs amitriptyline and nortriptyline from plasma samples using core-shell nanoparticles of the type Fe3O4@ZrO2@N- cetylpyridinium,and their subsequent determination by HPLC with UV detection

The solid phase extraction (SPE) is described for preconcentration of the antidepressant drugs amitriptyline and nortriptyline prior to their determination by HPLC with UV detection. It is based on the use of water-dispersible core-shell nanoparticles (NPs) of the Fe₃O₄@ZrO₂@N-cetylpyridinium type. The positively charged surfactant N-cetylpyridinium forms mixed aggregates with the drugs on the surface of the core-shell and thereby improves the adsorption of amitriptyline and nortriptyline through hydrophobic and/or ionic interactions. Their extraction depends on the type and amount of surfactant, sample pH, extraction time, desorption conditions, sample volume and amount of NPs that were optimized by application of experimental design. The enrichment factors are 220 and 250, respectively, for amitriptyline and nortriptyline, and the detection limits are 0.04 and 0.08 ng·mL‾¹. This protocol enables accurate and precise quantification of the two drugs in complex and low content samples. It was applied to the determination of the two drugs in plasma samples with relative recoveries in the range from 89 to 105 % and RSDs less than 4 %.

ᅟ

     

Microwave‐Assisted Catalyst Free Three Component Synthesis of Mono and Bis Spiro Pyrazolopyridines in Solvent Free Reaction

Multicomponent synthesis of mono and bis‐spiro pyrazolopyridines from isatin derivatives, indanedione, and 3‐methyl‐5‐aminopyrazole under microwave irradiation in the absence of any catalyst or solvent with high yield and short reaction time is reported.     

Copper/Graphene/Clay Nanohybrid: A Highly Efficient Heterogeneous Nanocatalyst for the Synthesis of Novel 1,2,3‐Triazolyl Carboacyclic Nucleosides via ‘Click’ Huisgen 1,3‐Dipolar Cycloaddition

A very mild and highly efficient synthesis of some novel 1H‐1,2,3‐triazolyl carboacyclic nucleosides via a ‘Click’ Huisgen cycloaddition of N‐propargyl nucleobases and azido alcohols using Cu/aminoclay/reduced graphene oxide nanohybrid (Cu/AC/r‐GO nanohybrid) as nanocatalyst is described. The preparation and characterization of Cu/AC/r‐GO nanohybrid are discussed. This catalyst was characterized by X‐ray diffraction, FT‐IR, TEM, and energy‐dispersive analysis of X‐ray techniques. Cu/AC/r‐GO nanohybrid is a stable and highly efficient heterogeneous nanocatalyst that can be easily prepared, used, and restored from the reaction mixture by simple filtration, and reused for many consecutive trials without significant decrease in activity.     

Preparation and Characterization of Functionalized Polyaniline-Based Nanocomposite as an Antibacterial Agent

Polyaniline-co-phenylenediamine (PAn/PDA) nanocomposite has been prepared in the aqueous medium using sodium dodecyl benzene sulfonate (DBSNa) and hydroxypropylcellulose (HPC) as a surfactant. The tests used in this research to characterize the products were SEM, TEM, FTIR, UV–Visible and TGA for morphology, particle size, chemical structure and stability. The results confirm that the spherical nanocomposites (40–90 nm) were formed with high thermal stability. It is shown in the results that the physicochemical properties of poly(alkyl substituted anilines) are depended on the substituent groups that are bonded to N-position. The prepared nanocomposites were then tested for the antibacterial properties against three pathogenic strains. The antibacterial properties of nanocomposites were investigated by disk diffusion, minimum inhibitory concentration (MIC), minimum bactericidal concentrations (MBC), and bactericidal kinetic methods. The disk diffusion result indicated that the diameter of the inhibition zones of PAn/PDA–HPC nanocomposite was 9, 11, and 10 mm against E. coli, P. aeruginosa, and S. aureus respectively. It was found that the value of MIC of PAn/PDA–HPC nanocomposite against E. coli, P. aeruginosa and S. aureus were 2.5, 1.25 and 2.5 mg/mL respectively. The evaluation results revealed the PAn/PDA–HPC nanocomposite exhibited excellent inhibitory activity against both gram-negative and gram-positive bacteria.     

Synthesis of 2-(2-Fluorophenyl)-2-methylamino-Cyclohexanone as a New Ketamine Derivative

The main goal of this article is to the present research on the development of ketamine derivatives. The target molecule was a fluoroderivative of ketamine, for which a multistep synthesis has been reported. This novel ketamine derivative, 2-(2-fluorophenyl)-2-methylamino-cyclohexanone, has been called fluoroketamine by our research group. The starting fluorobenzonitrile was reacted with the appropriate Grignard reagent followed by the bromination reaction to obtain α-bromocyclopentyl-(2-fluorophenyl)-ketone. The reaction of the obtained ketone with methylamine at ?40 °C then resulted in the formation of α-hydroxycyclopentyl-(2-flourophenyl)-N-methylamine. Finally, the five-memberd ring cyclopentanol was expanded to the cyclohexylketone by a thermal rearrangement reaction. The HCl salt of the target molecule, which is soluble in water, was obtained by the acidification of the free fluoroketamine with HCl. Preliminary animal tests on mice have shown that the resulting fluoroketamine has some advantages over ketamine in terms of the effective dose and the recovery time.     

Highly efficient synthesis of triazolo[1,2-a]indazole-triones and novel spiro triazolo[1,2-a]indazole-tetraones under solvent-free conditions

A new, convenient, and high yielding procedure for the synthesis of triazolo[1,2-a]indazole-triones by the condensation reaction between dimedone, aryl aldehydes, and ueazoles in the presence of a catalytic amount of sulfonated polyethylene glycol (PEG-SO₃H) as a highly stable and reusable eco-friendly degradable polymeric catalyst is described under solvent-free conditions. This procedure has also been applied successfully for the synthesis of novel spiro triazolo[1,2-a]indazole-tetraones.     

Can stimulated Raman pumping cause large population transfers in isolated molecules?

When stimulated Raman pumping (SRP) is applied to a stream of isolated molecules, such as found in a supersonic molecular beam expansion, we show that SRP can neither saturate nor power broaden a molecular transition connecting two metastable levels that is resonant with the energy difference between the pump and Stokes laser pulses. Using the optical Bloch-Feynman equations, we discuss the pumping of the hydrogen molecule from H(2) (v = 0, J = 0, M = 0) to H(2) (v = 1, J = 2, M = 0) as an illustration of how coherent population return severely reduces the SRP pumping efficiency unless the pump and Stokes laser pulses are applied with an appropriate relative delay and ratio of intensities.     

Nanoporous carbons as promising novel methane adsorbents for natural gas technology

Nanoporous carbons were synthesized using furfuryl alcohol and sucrose as precursors and MCM-41 and mordenite as nanoporous templates.The produced nanoporous carbons were used as adsorbent for methane storage.The average pore diameter of the samples varied from 3.9 nm to 5.9 nm and the BET surface area varied from 320m2/g to 824m2/g.The volumetric adsorption experiments revealed that MCM-41 and sucrose had better performance compared with mordenite and furfuryl alcohol,correspondingly.Also,the effect of precursor to template ratio on the structure of nanoporous carbons and their adsorption capacities was investigated.The nanoporous carbon produced from MCM-41 mesoporous molecular sieve partially filled by sucrose shows the best methane adsorption capacity among the tested samples.     

Theoretical study of dihydrogen bonded clusters of water with tetrahydroborate

Ab initio calculations were used to analyze interactions of BH₄ ^? with 1?C4 molecules of H₂O at the MP2/6-311++G(d,p) and B3LYP/6-311++G(d,p) computational levels. The negative cooperativity for dihydrogen bond clusters containing H₂O···H₂O hydrogen bonds is more remarkable. The negative cooperativity is increased with increasing the size and also the number of hydrogen bonds in the cluster. The B?CH stretching frequencies show blue shifts with respect to cluster formation. Also greater blue shift of stretching frequencies where predicted for B?CH bonds which did not contribute in dihydrogen bonding with water molecules. The structures obtained have been analyzed with the Atoms in Molecules (AIM) methodology.     

Study of cure kinetics of epoxy/DDS/nanosized (SiO2/TiO2) system by dynamic differential scanning calorimetry

In this study the curing kinetics of epoxy based on the diglycidyl ether of bisphenol A (DGEBA), 4,4′‐diaminodiphenyl sulfone (DDS) as a hardener, and SiO₂/TiO₂ (70:30) as a nanofiller was investigated by nonisothermal differential scanning calorimetry (DSC). The effects of different weight contents of SiO₂/TiO₂ nanoparticles were studied using DSC in Dynamic Mode and the best value of the nanofiller was found to be 5 phr (parts per hundred). Dynamic measurements were used to obtain the total heat of reaction of the epoxy system as well as its activation energy (E_a) based on the isoconversional methods of Kissinger and Ozawa. The process revealed a dependence of the activation energy on conversion (α). The morphology of the cured system was investigated by scanning electron microscopy (SEM). It showed a strong cross‐linking between the resin and hardner and a relatively better dispersion of surface modified filler nanoparticles. Copyright © 2009 John Wiley & Sons, Ltd.