Wavelength-Dependent Transient Characteristics Caused by Gain Saturation in Highly Nonlinear Fiber-Based Raman Amplifiers

We have investigated the transient characteristics of discrete Raman Amplifiers and found that the response time caused by gain saturation is dependent upon the wavelength, which corresponds to the effective length of the pump light.     

Fluorophotometric Determination of Hydrogen Peroxide with Fluorescin in the Presence of Cobalt (II) and Reaction Against Other Reactive Oxygen Species

A fluorophotometric method for the determination of hydrogen peroxide (H₂O₂) using fluorescin was developed. This method was based on the oxidative reaction of fluorescin, a colorless, non-fluorescent lactoid fluorescein, by H₂O₂ to give highly fluorescein fluorescence emission. In the determination of H₂O₂, the calibration curve exhibited linearity over the H₂O₂ concentration range of 1.5–310 ng mL⁻¹ at an emission wavelength of 525 nm with an excitation of 500 nm and with relative standard deviations (n = 6) of 2.51%, 2.48%, and 1.31% for 3.1 ng mL⁻¹, 30.8 ng mL⁻¹, and for 308 ng mL⁻¹ of H₂O₂, respectively. The detection limit for H₂O₂ was 1.9 ng mL⁻¹ six blank determinations was performed (ρ = 6). This proposed method was applied to detection of other reactive oxygen species and nitrogen species (ROS/RNS) such as singlet oxygen (¹O₂), hydroxyl radical (^•OH), peroxynitrite (ONOO⁻) etc., and it was possible to detect them with a high sensitivity. In addition, this proposed method was applied to the recovery tests of H₂O₂ in calf serum, human saliva, rain water, and wheat noodles; the results were satisfactory.     

Analysis of Spectral Reflectance Using Normalization Method from Endoscopic Spectroscopy System

Objective assessment of gastrointestinal mucosal color is extremely important in the endoscopic diagnosis of digestive tract disease. In this paper, we propose a method to clarify the spectral characteristics of gastric and colon cancer. A large number of spectral reflectance data of mucous membrane are measured by the endoscopic spectroscopy system (ESS) in the National Cancer Center Hospital East, Kashiwa, Japan and the Department of Internal Medicine, Self-Defense Force Center Hospital, Tokyo, Japan. We assume that early cancer appears primarily in the spectral data of short wavelength, because it is usually present in a superficial cell where short wavelength light is scattered more strongly than long wavelength light. To identify the features in the short wavelength components, the spectral reflectance was divided by the reflectance of a long wavelength. We investigated the possibility of distinguishing early cancer from normal spectral data through statistical analysis, employing the projection axis as the mean difference between them. Early cancer and normal spectral data were projected on the projection axis, and the Student’s T-test was applied to evaluate the mean of the distribution between these data.     

Microstructure control of low-resistivity tin-doped indium oxide films grown by photoreaction of nanoparticles using a KrF excimer laser at room temperature

A tin-doped indium oxide (ITO) film on a SiO₂ substrate was prepared by photo-irradiation of spin-coated nanoparticles using a Xe excimer lamp and a KrF excimer laser. The effects of the excimer lamp and the excimer laser on the resistivity, mobility, and carrier concentration of the film were investigated. To better understand how to control the microstructure of the film, we investigated the effect of thickness on the resistivity of a film prepared by the two-step process, and found that the resistivity was higher in a thicker film. Using two-step irradiation plus one-step KrF irradiation in N₂ at room temperature, we produced an ITO film with lowest resistivity of any in this study. The electrical resistivity of this film was 5.94×10⁻⁴ Ω cm. On the other hand, when using a simple thermal process, the resistivity of a film sintered at 500°C in N₂ was 4.10×10⁻³ Ω cm. The differences in resistivity are discussed on the basis of the microstructure of the films using atomic force microscopy and Hall measurements.     

Color Conversion Method for Multiprimary Display Using Matrix Switching

The range of reproducible color, i.e., color gamut, of conventional three-primary display devices is sometimes insufficient for reproducing the natural color of an object through color imaging systems. A multiprimary display is being developed for the purpose of reproducing an expanded color gamut using more than three primary colors. In this paper, a color conversion method is proposed to reproduce the natural color by additive mixture of multiprimary colors. The multiprimary color signal in this conversion method is calculated from the three-dimensional color coordinates CIE-XYZ, considering the dynamic range of each primary color. Divided into some linear elements from the polyhedral color solid of the multiprimary display, the conversion considering the constraint of the dynamic range can be performed by simple calculation without iterative calculation or a huge three-dimensional look up table. A fast computation method with a two-dimensional look-up-table is also presented. Using the proposed method, the result of the color reproduction is experimentally demonstrated by a six-primary projection display.     

XUV radiation transfer through high-Z metal foil in a laser-produced plasma

Aluminum and gold foils have been irradiated with 1.05-μm, 100-psec laser pulses at an intensity of 3 × 10¹⁴ W/cm². A spatially resolved spectrum of XUV radiation from a rear-side plasma has been observed in the wavelength range from 10 to 100 Å. The spectral intensity for the Al foil decays exponentially with foil thickness and goes to zero at 3 μm. The intensity for the Au foil also decays exponentially up to 1 μm but remains almost constant from 1 to 6 μm. This result for the Au foil indicates that radiation heat conduction plays an important role in energy transport through high-Z plasmas.     

Dual-wavelength injection-locked pulsed laser

An injection-locked pulsed Ti:sapphire laser oscillating at dual wavelengths is demonstrated for the first time to our knowledge. By use of two feedback loops, seeds of two independent master lasers are locked on specific longitudinal modes of a power oscillator, leading to a stable dual-wavelength oscillation over a long time scale. The two injection-locked pulsed outputs completely overlap in time, with spectral purities reaching a Fourier-transform limit. The dual-wavelength oscillation is controlled by the master lasers only, allowing for flexible selectivity of the two wavelengths and full controllability of the relative two-wavelength pulsed energies.     

Possible one-dimensional 3He quantum fluid formed in nanopores

Heat capacity measurements have been made down to 5 mK for 3He fluid films adsorbed in one-dimensional (1D) nanometer-scale pores, 28 A in diameter, preplated with 4He of 1.47 atomic layers. At low 3He density, the heat capacity shows a density-dependent, Schottky-like peak near 150 mK asymptoting to the value corresponding to a 2D Boltzmann gas at high temperatures. The peak behavior is attributed to the crossover from a 2D gas to a 1D state at low temperatures. The degenerate state of the 1D 3He fluid is indicated by a predominantly linear temperature dependence below about 30 mK.     

Wall shear stress and near-wall convective transport: Comparisons with vascular remodelling in a peripheral graft anastomosis

Fluid dynamic properties of blood flow are implicated in cardiovascular diseases. The interaction between the blood flow and the wall occurs through the direct transmission of forces, and through the dominating influence of the flow on convective transport processes. Controlled, in vitro testing in simple geometric configurations has provided much data on the cellular-level responses of the vascular walls to flow, but a complete, mechanistic explanation of the pathogenic process is lacking. In the interim, mapping the association between local haemodynamics and the vascular response is important to improve understanding of the disease process and may be of use for prognosis. Moreover, establishing the haemodynamic environment in the regions of disease provides data on flow conditions to guide investigations of cellular-level responses.