Near-Infrared Circularly Polarized Luminescence through Intramolecular Excimer Formation of Oligo(p-phenyleneethynylene)-Based Double Helicates

Carbon-based double helicates consisting of two anthracene-containing oligo(p-phenyleneethynylene) units and two flexible chiral 1,1′-binaphthyl units or two rigid chiral 9,9′-spirobifluorene units were developed. The curved oligo(p-phenyleneethynylene) fragments in the double helicates were successfully constructed by tin-mediated reductive aromatization. Helical oligo(p-phenyleneethynylene) double strands fixed by two rigid spirobifluorene units showed little structural change under photoirradiation, thereby emitting circularly polarized luminescence (CPL) in the visible region with a high quantum yield (Φ_PL=0.93). In contrast, flexible binaphthyl units induced dynamic structural change of the oligo(p-phenyleneethynylene) luminophores under photoirradiation, leading to strong CPL (|g_lum|=1.1×10⁻²) in the near-infrared (NIR) region. UV/Vis, circular dichroism (CD), CPL and NMR spectroscopic analyses of the binaphthyl-hinged double helicate suggested excimer formation between two π-conjugated strands in the excited state. Theoretical calculations highlight the importance of the tightly interlocked excimer structure of the carbon-based double helicate in controlling the angle between the electric and magnetic transition dipole moments for strong NIR CPL generation.     

Development of dye-sensitized solar cells based on visible-light-responsive TiO2 thin films with a unique columnar structure

A visible-light-responsive TiO₂ thin film (Vis-TiO₂), possessing a unique columnar structure oriented perpendicular to the substrate, has been prepared by using a radio-frequency magnetron sputtering deposition method. The unique TiO₂ thin film was used as a key component of N719 dye-sensitized solar cells (DSSCs). The rough morphology caused by the columnar structure leads to enhanced photovoltaic performances of these DSSCs as a consequence of increased amounts of adsorbed dyes and facilitated diffusion of the electrolyte into Vis-TiO₂ film. Additionally, photovoltaic performances of the DSSCs were found to depend strongly on the thickness of the Vis-TiO₂ film, which can be readily controlled by adjusting the sputtering time conducted for deposition. Consequently, a solar-to-electric energy conversion efficiency of 2.6 % under AM 1.5 illumination was observed for an optimally performing DSSC that has a Vis-TiO₂ film thickness of 6.9 μm, prepared by employing a sputtering time of 700 min.     

Optical anisotropy in solution-cast film of cellulose triacetate

The out-of-plane birefringence and its wavelength dispersion are studied employing solution-cast films of cellulose triacetate (CTA). In solution-cast process, CTA molecules are induced to align in the film plane. Although refractive index is the lowest in the oriented direction for the CTA films stretched more than 110 %, refractive index is found to be the lowest in the normal direction for the unstretched cast film. Attenuated total reflection measurements reveal that in-plane alignment of the acetyl group which provides strong polarizability anisotropy is responsible for the phenomenon. Furthermore, the out-of-plane birefringence is found to increase with increasing wavelength, i.e. extraordinary wavelength dispersion, whereas a stretched CTA film shows ordinary wavelength dispersion. The level of the out-of-plane birefringence in cast films depends on the preparation conditions, which is predictable considering the evaporation rate. Moreover, it is demonstrated for the first time that the out-of-plane birefringence and its wavelength dispersion can be modified by addition of a certain plasticizer such as tricresyl phosphate (TCP). During the evaporation, TCP molecules orient in the film plane accompanying the orientation of CTA chains by intermolecular orientation correlation, called nematic interaction. This technique will widen the scope of material design of retardation films because there are numerous liquid compounds having strong polarizability anisotropy.     

Biological Effects of a Simplified Synthetic Analogue of Ion-Channel-Forming Polytheonamide B on Plasma Membrane and Lysosomes

Polytheonamide B ( 1 ) is a linear 48-mer natural peptide with alternating d - and l -amino acid residues. Compound 1 forms conducting channels for monovalent ions and exhibits potent cytotoxicity against MCF-7 cells. Previously, we reported that nanomolar concentrations of 1 induce plasma membrane depolarization and lysosomal pH disruption, which triggers apoptosis. Here, we report the cellular localization and biological action of a simplified synthetic analogue of 1 , polytheonamide mimic 3 . Compared with 1 , the toxicity of 3 against MCF-7 cells is 16 times weaker. Although its plasma membrane depolarization effect is only 3.6 times lower, more 3 (20-fold) is required to neutralize lysosomal pH. Thus, the effective concentrations for lysosomal neutralization and cytotoxicity by 3 are comparable. These results strongly suggest that the activity of 3 against the lysosomal membrane is more important for apoptotic cell death than its effects on the plasma membrane, and provide valuable information regarding the unique behavior of polytheonamide-based molecules.     

Total Synthesis of 1‐Hydroxytaxinine

1‐Hydroxytaxinine ( 1 ) is a cytotoxic taxane diterpenoid. Its central eight‐membered B‐ring possesses four oxygen‐functionalized centers (C1, C2, C9, and C10) and two quaternary carbon centers (C8 and C15), and is fused with six‐membered A‐ and C‐rings. The densely functionalized and intricately fused structure of 1 makes it a highly challenging synthetic target. Reported here is an efficient radical‐based strategy for assembling 1 from A‐ and C‐ring fragments. The A‐ring bearing an α‐alkoxyacyl telluride moiety underwent intermolecular coupling with the C‐ring fragment by a Et₃B/O₂‐promoted decarbonylative radical formation. After construction of the C8‐quaternary stereocenter, a pinacol coupling reaction using a low‐valent titanium reagent formed the B‐ring with stereoselective installation of the C1,C2‐diol. Subsequent manipulations at the A‐ and C‐rings furnished 1 in 26 total steps.     

Total synthesis of mappicine ketone (nothapodytine B) by means of sulfur-directed 5-exo-selective aryl radical cyclization onto enamides

Enamides 5, on treatment with Bu(3)SnH-AIBN, underwent aryl radical cyclization in a 5-exo manner to give 1-[bis(phenylthio)methyl]dihydroisoindoles 6, which were partially desulfurized with Bu(3)SnH-AIBN to give 1-mono(phenylthio)methyl congeners 7. Formation of 6 from 5 may be explained by the presence of two phenylthio groups at the terminus of the N-vinylic bond of 5, since enamide 8a having no phenylthio group underwent aryl radical cyclization in a 6-endo manner. Compound 7d (R = CF(3)) was transformed into sulfoxide 16, which was treated with (CF(3)CO)(2)O and then with 10% NaOH to give a model compound 20 of mappicine ketone (MPK) (1) through aldol condensation of aldehyde 18. An attempt to synthesize MPK using this method with sulfoxide 28 prepared from 25, however, was unsuccessful, and, instead, photochemical cyclization of enamide 38 prepared from 25 furnished MPK.     

Sol-Gel Preparation of Fast Proton-Conducting P2O5-SiO2 Glasses

We have investigated the proton conductivities of the sol-gel-derived P₂O₅-SiO₂ glass at –50 to 120°C. The obtained glass is porous, where the surface area, pore volume and pore diameter are 740 m²/g, 0.5 cm³/g and <5 nm, respectively. The freezing temperature of water molecules adsorbed in the pores was –20°C, which is much lower than that of free liquid water due to the quantum size effect of the water confined in the pores. The electrical conductivities followed the Arrhenius equation in the temperatures between –20 and 120°C. Below –20°C, the adsorbed-water molecules were frozen, resulting in a rapid decrease of the proton conductivity. Considering the high conductivity, chemical and thermal stability, this oxide glass membranes have potential for the fuel cell membrane.     

Dihydrophenanthrene-type intermediates during photoreaction of trans-4'-benzyl-5-styrylfuran

[structure: see text] Photoreaction of trans-4'-benzyl-5-styrylfuran (trans-BSF) has been studied by the 355-nm laser flash photolysis (LFP) in CH2Cl2 using a Nd3+:YAG laser (30 ps, 5 mJ pulse(-1) or 5 ns, 30 mJ pulse(-1)). Transient fluorescence and absorption spectra assigned to the singlet excited trans-BSF were observed during the 30-ps LFP, whereas a transient absorption spectrum with two peaks at 400 and 510 nm, assigned to the trans-fused dihydrophenanthrene (DHP)-type intermediate (DP1), was observed during the 5-ns LFP. It is clearly suggested that a two-photon absorption process is involved in the formation of DP1. The first photoreaction is the photoisomerization of trans-BSF, which occurs to give cis-BSF. The second photoreaction process is photocyclization of cis-BSF, which occurs to give DP1 decaying with the half lifetime (tau1/2) of 2.8-4.0 micros to produce another DHP-type intermediate (DP2) with an absorption peak at 400 nm in the absence of O2, through [1,9]-hydrogen shift. DP2 decayed with tau1/2 > 500 micros to give the product through aromatization. In O2-saturated CH2Cl2, DP1 decayed with tau1/2 = 250 ns to give a radical intermediate (X) with two peaks at 410 and 510 nm, through hydrogen abstraction of DP1 by O2. X decayed with tau1/2 = 150 micros to give the product through successive hydrogen abstraction.     

Analysis of sugar epimers using mass spectrometry: N-acetyllactosamine-6,6'-disulfate and the 2'-epimer

Galbeta1-4GlcNAc-6,6'-disulfate and 2'-epimer corresponding to Galbeta1- 4ManNAc-6,6'-disulfate were distinguished by mass spectrometry by utilizing fast atom bombardment (FAB), electrospray ionization (ESI) and matrix-assisted laser desorption/ionization (MALDI) methods. As for the steric information, negative-ion ESI mass spectrometry/mass spectrometry (MS/MS) provides the most extensive data, but FAB MS/MS also reveals detailed structural information of interest in our case, where MALDI MS is not yet fully equipped with post-source decay.