Asymmetric synthesis of 2-substituted-3-aminocarbonyl propionic acid

An asymmetric synthetic route to 2-substituted-3-aminocarbonyl propionic acid, which is the significant component of low-molecular-weight renin inhibitors, is described. The key step of this synthesis is diastereoselective alkylation by using chiral oxazolidinone and benzyl bromoacetate.     

A new series of antiallergic agents. I. Synthesis and activity of 11-(2-aminoethyl)thio-6,11-dihydrodibenz[b,e]oxepin derivatives.

A new series of 11-substituted 6,11-dihydrodibenz[b,e]oxepin derivatives was synthesized and evaluated for antiallergic activity. Convenient methods for the preparation of sulfides from alcohols were developed. Structure-activity relationships are described. Compound 7, 11-[2-(dimethylamin)ethyl]thio-6,11-dihydrodibenz[b,e] oxepin-2-carboxylic acid hydrochloride, was the most potent in the rat passive cutaneous anaphylaxis test (ED50 = 0.92 mg/kg p.o.). It had a potent inhibitory effect on anaphylactic bronchoconstriction in guinea pigs (ED50 = 0.029 mg/kg p.o.) and H1 receptor antagonistic effect (Ki = 14 nM) with few central nervous system side effects. Additionally, an antagonistic effect against prostaglandin D2-induced contraction of isolated guinea pig trachea (pA2 = 5.73) was an attractive mechanism of action of the new antiallergic agent. Compound 7 was selected for further evaluation as KW-4994.     

Ruthenium(II)-catalyzed hydrogenation of carbon dioxide to formic acid. Theoretical study of real catalyst, ligand effects, and solvation effects

Ruthenium-catalyzed hydrogenation of carbon dioxide to formic acid was theoretically investigated with DFT and MP4(SDQ) methods, where a real catalyst, cis-Ru(H)2(PMe3)3, was employed in calculations and compared with a model catalyst, cis-Ru(H)2(PH3)3. Significant differences between the real and model systems are observed in CO2 insertion into the Ru(II)-H bond, isomerization of a ruthenium(II) eta1-formate intermediate, and metathesis of the eta1-formate intermediate with a dihydrogen molecule. All these reactions more easily occur in the real system than in the model system. The differences are interpreted in terms that PMe3 is more donating than PH3 and the trans-influence of PMe3 is stronger than that of PH3. The rate-determining step is the CO2 insertion into the Ru(II)-H bond. Its deltaG(o++) value is 16.8 (6.8) kcal/mol, where the value without parentheses is calculated with the MP4(SDQ) method and that in parentheses is calculated with the DFT method. Because this insertion is considerably endothermic, the coordination of the dihydrogen molecule with the ruthenium(II)-eta1-formate intermediate must necessarily occur to suppress the deinsertion. This means that the reaction rate increases with increase in the pressure of dihydrogen molecule, which is consistent with the experimental results. Solvent effects were investigated with the DPCM method. The activation barrier and reaction energy of the CO2 insertion reaction moderately decrease in the order gas phase > n-heptane > THF, while the activation barrier of the metathesis considerably increases in the order gas phase < n-heptane < THF. Thus, a polar solvent should be used because the insertion reaction is the rate-determining step.     

Novel type of heterogenized CuCl2 catalytic systems for oxidative carbonylation of methanol

A novel type of heterogenized CuCl₂ catalysts was designed for the oxidative carbonylation of methanol to dimethyl carbonate (DMC) taking account of the plausible reaction mechanism and intermediates. To prevent severe corrosion of the reaction equipment materials due to Cl^– while keeping the catalytic activity of the homogeneous CuCl₂ catalyst, we adopted, as supports (or ligands) of CuCl₂, four polymers, bearing a 2,2-bipyridine (bpy) or pyridine (py) unit, namely, poly(2,2-bipyridine-5,5-diyl) (Pbpy), poly(pyridine-2,5-diyl) (Ppy), poly(N,N-bisphenylene-2,2-bipyridine-4,4-dicarboxylic amide) (Bpya), and poly(4-methyl-4-vinyl-2,2-bipyridine) (Pvbpy), together with one chelate compound, 8-quinolinol. The catalytic activity, stability of heterogenized CuCl₂ and their corrosivities to stainless steels were examined in the liquid-phase reaction of the oxidative carbonylation of methanol. These polymer-supported catalysts showed considerable catalytic activity and stability for the DMC synthesis. In particular, the Pbpy-CuCl₂ and Ppy-CuCl₂ catalysts exhibited high DMC yields and selectivity comparable to those of the homogeneous CuCl₂ catalyst. This high activity appears to be associated with the presence of the -conjugated system in the polymers, which affect the redox reactions of Cu involved in the catalytic reaction. All of the polymer-supported CuCl₂ catalysts could be easily recycled after filtration, and the initial catalytic activity was maintained after three times of use. The corrosive characters of the catalysts were closely related to CuCl₂ leaching from the supports, which reflects the ability of supports to coordinate Cu. These experimental results suggest that both the electronic structure and the coordination ability of the polymer supports are key factors for the development of an effective catalytic system.     

Friction coefficient and structural transition in a poly(acrylamide) gel

The friction coefficient between the polymer network of an opaque poly(acrylamide) gel and water is measured as a function of the mole fraction of cross linker. The friction coefficients of opaque gels are 4 to 5 orders of magnitude smaller than those of the transparent gels. This drastic decrease in friction occurs when the mole fraction of cross linker is 0.2. In opaque gels, the friction coefficient of gels and the mole fraction of cross linker are related by a power law. The network structure of the opaque gels used in the friction measurements is examined with a confocal laser scanning microscope. The opaque gel network consists of a fractal aggregate of colloidal particles. The radius of particles and the volume occupied by the particles depend on the mole fraction of cross linker. Both relationships are well described by the power laws. The power law of the friction coefficient is well explained in terms of the power laws of the structural parameters and the Stokes equation of the hydrodynamic friction for the spherical particle. It indicates that the friction of the opaque gel is determined simply by the structure of the polymer network.     

Simultaneous assay of four stereoisomers of diltiazem hydrochloride. Application to in vitro chiral inversion studies

Summary The simultaneous stereospecific assay of four stereoisomers of diltiazem hydrochloride in bulk drug and aqueous solution was developed using HPLC on a Chiralcel OF column. The four isomers were quantitated with good precision by the internal standard method. The chiral inversion of (+)-cis-diltiazem hydrochloride in vitro, stability of its (2S, 3S) configuration in the solid and aqueous states was examined by HPLC. Chiral inversion of (+)-cis-diltiazem hydrochloride was not observed in the solid state, and its (2S, 3S) configuration was stable to heat, humidity and light. Chiral inversion of (+)-cis-diltiazem hydrochloride (2S, 3S) was observed in aqueous solution under UV, but not in aqueous solution stored at 80°C for 5h nor under visible light for 10 h. The (+)-cis-diltiazem hydrochloride (2S, 3S) epimerized to (+)-trans-diltiazem hydrochloride (2R, 3S) with a half-life of 5h in aqueous solution under UV but the reverse chiral inversion of (+)-trans-diltiazem hydrochloride (2R, 3S) to (+)-cis-diltiazem hydrochloride (2S, 3S) was not observed.     

Heterocycles. XXVI. A total synthesis of optically pure (+)-catechin pentaacetate

A total synthesis of optically pure (+)-catechin pentaacetate has been established using the (-)-chalcon epoxide (100% ee) derived from 3,4,2′,4′,6′-pentakis(methoxymethoxy)chalcon as the starting material. The optical purity of the product is confirmed by ¹H nmr analysis in the presence of a shift reagent.     

Preparation of zein microspheres conjugated with antitumor drugs available for selective cancer chemotherapy and development of a simple colorimetric determination of drugs in microspheres

Zein microspheres conjugated with antitumor drugs (mitomycinc (MMC), daunomycin hydrochloride (DM), peplomycin sulfate (PEP] were prepared by using a dimethyl sulfoxide (DMSO)-H2O system. MMC with low solubility in H2O was easily entrapped by the standard procedure, whereas some modifications were required for moderately and highly soluble drugs such as DM and PEP. Colorimetric determination of the drugs in microspheres was easily achieved by use of the phenol-sulfuric acid method for drugs with sugar moieties in their molecules, such as DM and PEP, while a simple treatment of the microspheres with concentrated sulfuric acid was applied in the case of drugs having a chromophore in their molecules, such as DM and MMC.