Prospects of Sol-Gel Process for Spectral Hole-Burning Glasses

Persistent spectral hole burning was studied in Eu³⁺ ions-doped Al₂O₃-SiO₂ glass prepared by a sol-gel method. The gel synthesized by the hydrolysis of Si- and Al-alkoxides and EuCl₃·6H₂O was heated in air and hydrogen gas atmospheres. For the glass heated in air to contain OH bonds, the hole was formed by the photoinduced rearrangement of the OH bonds surrounding the Eu³⁺ ions, and was thermally refilled and erased above 200 K. On the other hand, the glass heated in hydrogen gas showed the hole spectrum above 200 K. It was found that the hole depth was independent of the temperature and was 7% of the total intensity at room temperature. The proposed mechanism was the electron transfer between the Eu³⁺ ions and the defect centers formed in glass matrix.     

Hydrogen Gas Sensing of High Electrical Conducting-P2O5-SiO2 Glasses Prepared by Sol-Gel Process

High proton-conducting P₂O₅-SiO₂ glass was applied to the electrolyte of the hydrogen concentration cell for hydrogen gas sensing. 5P₂O₅·95SiO₂ glass was prepared using the sol-gel method and its electrical conductivity and electromotive force were measured at 50°C as a function of both the ambient humidity and hydrogen gas concentration. The electrical conductivities increased with increasing humidity and reached 10^–2 S/cm at 90% relative humidity. The electromotive force of the hydrogen concentration cell, where the glass was used as a membrane, showed good Nernstian response to hydrogen pressure in the high relative humidity region.     

Application of Hot Press Sintering to Na2O-B2O3-SiO2 Gels Containing Quantum Dots for Lowering of Densification Temperature

Na₂O-B₂O₃-SiO₂ (NBS) gels containing a large amount of CdS quantum-dots (10 wt%) were densified using the hot press (HP) sintering method. By HP treatment, full-densification temperature could be lowered by about 40°C than that of the normal non-pressing (NP) heat treatment. Exciton absorption of CdS quantum-dots in HP-sample showed a large blue shift compared with that in the NP sample, and the size-distribution of CdS dots remained very sharp, with a mean particle diameter d = 3.66 nm and a standard deviation of = 0.72. HP pressure had a large effect on the reduction of sintering temperature and time, resulting in the suppression of the aggregation and growth of CdS quantum-dots in NBS glasses.     

Determination of kynurenic acid levels in rat brain microdialysis samples and changes in kynurenic acid levels induced by N‐acetylaspartic acid

The levels of kynurenic acid, an endogenous antagonist of α₇ nicotinic acetylcholine and N‐methyl‐D ‐aspartate receptors, were measured in microdialysis samples obtained from the prefrontal cortices of rats using column‐switching high‐performance liquid chromatography with fluorescence detection. When the perfusate was constantly infused at a rate of 1.0 μ/min, the in vitro recovery of kynurenic acid through the dialysis membrane was approximately 20.4%, and the precision was within 1.31%. Endogenous kynurenic acid in the microdialysis sample was clearly detected using column‐switching high‐performance liquid chromatography. As an application study, N‐acetyl‐L ‐aspartic acid, an endogenous metabolite and precursor of N‐acetyl‐L ‐aspartyl‐L ‐glutamic acid, which is an agonist of metabotropic glutamate receptors, was infused for 120 min through the microdialysis probe. The kynurenic acid level significantly increased during the infusion of N‐acetyl‐L ‐aspartic acid, suggesting that kynurenic acid might have some association with N‐acetyl‐L ‐aspartic acid in vivo. Copyright © 2009 John Wiley & Sons, Ltd.     

Characterization of Ultra‐Thin Temperature‐Responsive Polymer Layer and Its Polymer Thickness Dependency on Cell Attachment/Detachment Properties

Ultra thin poly(N‐isopropylacrylamide) (PIPAAm) modified glass coverslips (PIAPAm‐CS) using electron beam irradiation exhibited a clear relationship between the polymer thickness and thermal cell adhesion/detachment behavior. The polymer thickness dependency and the characteristic of ultra thin PIPAAm layer, has been illustrated in terms of the molecular motion of the modified PIPAAm chains. PIPAAm‐CSs surfaces with various area‐polymer densities and thicknesses were characterized by AFM and protein adsorption assay. The newly obtained results gave a further insight into the illustration. Finally, the future application of intelligent surfaces was discussed for fabricating tissue and organ.

     

Synthesis and properties of high‐molecular‐weight stereo di‐block polylactides with nonequivalent D/L ratios

Di‐stereoblock polylactides (di‐sb‐PLA: PLLA‐b‐PDLA) having high molecular weight (M_n > 100 kDa) were successfully synthesized by two‐step ring‐opening polymerization (ROP) of L ‐ and D ‐lactides using tin(2‐ethylhexanoate) as a catalyst. By optimizing the polymerization conditions, the block sequences were well regulated at non‐equivalent feed ratios of PLLA and PDLA. This synthetic method consisted of three stages: (1) polymerization of either L ‐ or D ‐lactide to obtain a PLLA or PDLA prepolymer with a molecular weight less than 50 kDa, (2) purification of the obtained prepolymer to remove residual lactide, and (3) polymerization of the enantiomeric lactide in the presence of the purified prepolymer. Their ¹³C and ³¹P NMR spectra of the resultant di‐sb‐PLAs strongly supported their di‐stereo block structure. These di‐sb‐PLAs, having weight‐average molecular weights higher than 150 kDa, were fabricated into polymer films by solution casting and showed exclusive stereocomplexation. The thermomechanical analysis of the films revealed that their heat deformation temperature was limited probably because of their low crystallinity owing to the non‐equivalent PLLA/PDLA ratio. The blend systems of the di‐sb‐PLAs having complementary stereo‐sequences (the one with a long PLLA block and the other with long PDLA block) were also prepared and characterized to enhance the sc crystallinity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 794–801, 2010