Studies on sustained-release suppositories. III. Rectal absorption of morphine in rabbits and prolongation of its absorption by alginic acid addition

Rectal absorption of morphine from various kinds of suppository bases was investigated. The extent of bioavailability of morphine by rectal administration varied with the bases used (30.5-97.5%), but every value was higher than that in the case of oral administration (13.5%). Witepsol bases were preferable to macrogol base for the rectal absorption of morphine. In particular, Witepsol S-55 or W-35 gave a higher plasma peak level than H-15 or E-75, whereas the difference in the mean residence times obtained from these bases could not be regarded as significant. Sustained-release suppositories of morphine could be prepared simply by mixing alginic acid (Alg) with morphine in a suppository base. Further, prolonged rectal absorption could be obtained by using these sustained-release suppositories, and the absorption rate was controlled by the amount of Alg added. It seems likely that the sustained release was due to the binding of morphine to Alg from the results of partition coefficient and binding ratio measurements in aqueous solution. The rapid initial absorption and the subsequent prolonged absorption of morphine simultaneously obtained from the morphine-Alg suppository may be useful in the clinical context.     

Preparation and properties of rare-earth containing oxide fluoride glasses

The preparation of the rare earth containing oxide fluoride glasses LnF₃ (Ln; Y through Lu)-BaF₂-AlF₃-GeO₂ in which the nominal content of LnF₃ reached 60 mol% in maximum and their basic properties such as density, refractive index and glass transition temperature were investigated and summarized in detail. Especially, in order to discuss the local structure around the rare earth ion in the glass, the Judd-Ofelt analysis (discussion with Ω parameters) of the HoF₃-BaF₂-AlF₃-GeO₂ glasses was carried out. The unique fluorescent behavior and the magnetic properties of LnF₃-BaF₂-AlF₃-GeO₂ glasses (Ln = Tb and/or Sm) were also studied.     

Preparation and properties of polyamides and polymides containing bibenzyl,stilbene, and tolan structures

Polyisophthalamides and polyterephthalamides were prepared by the solution polycondensation of the corresponding diacyl chlorides with 4,4′-diaminobibenzyl, trans-4,4′-diaminostilbene, and 4,4′-diaminotolan in N,N-dimethylacetamide (DMAc). Polypyromellitimides were synthesized in two steps by the ring-opening polyaddition of pyromellitic dianhydride with the aromatic diamines in DMAc, followed by thermal cyclodehydration. The amorphous polyisophthalamides were soluble in some amide solvents containing lithium chloride, while the polyterephthalamides having fair degree of crystallinity were insoluble in these solvents. The thermal stability of these aromatic polymers decreased in the order of the tolan-containing polymers > the stilbene-containing polymers > the bibenzyl-containing polymers, both in air and under nitrogen.     

Fully automated micro- and nanoscale one- or two-dimensional high-performance liquid chromatography system for liquid chromatography-mass spectrometry compatible with non-volatile salts for ion exchange chromatography

A one- or two-dimensional high performance liquid chromatography system for electrospray ionization mass spectrometers has been developed that is optimized for ion exchange and reversed phase separations. A unique and simple valve configuration permits the use of a variety of non-volatile salts; ammonium sulfate was used in an example of strong cation exchange separations. The system was designed and evaluated for both micro- and nanoflow chromatography. The peptide detection limit was approximately 100 fmol for micro- and 20 fmol for nanoflow, demonstrating the concentration and mass sensitivity improvements expected with nanoelectrospray ionization. The 1D/2D-HPLC MS system is fully automated for routine peptide analyses, compatible with direct injection of proteolytic digests, and exhibits chromatographic reproducibility and sensitivity. Software permits operator selection of either a 1D or 2D configuration with corresponding system parameters as required for individual samples. The hardware elements and resulting performance are described in this paper.     

Effect of sucrose on the structure of a cubic phase formed from a monoolein/water mixture

The effect of sucrose on the structure of molecular assemblies formed in an MO/H2O mixture has been studied using a small-angle X-ray scattering method. It was found that the phase transition Ia3d --> Pn3m --> H(II) occurs with increased sucrose concentration in the mixture with the composition 70 wt% MO at 20 degrees C. This structural change induced by sucrose addition would be ascribed to a cosmotropic property of sucrose, which leads to the dehydration of the MO head group and hence causes a decrease in the effective area occupied by the MO molecule at the polar/apolar interface, which facilitates the formation of molecular assemblies with a high curvature for the reversed liquid-crystal mesophase.     

A free energy calculation study of the effect of H-->F substitution on binding affinity in ligand-antibody interactions

Changes in binding affinity to catalytic antibody 6D9 of chloramphenicol phosphonate derivatives (CPDs) containing H or F were investigated by performing free energy calculations based on molecular dynamics simulations. We calculated the binding free energy, enthalpy, and entropy changes (DeltaDeltaG, DeltaDeltaH, and -TDeltaDeltaS) attributable to H-->F substitution by comparing results for CPDs containing a trifluoroacetylamino group (CPD-F) or an acetylamino group (CPD-H). The calculated DeltaDeltaG, DeltaDeltaH, and -TDeltaDeltaS values were -2.9, -6.3, and 3.5 kcal mol(-1) and close to experimental values observed for a series of similar ligands, chloramphenicol phosphonates with F and H (-1.4, -3.5, and 2.1 kcal mol(-1)). Therefore, CPD-F binds more strongly to 6D9 than does CPD-H. To clarify the origin of the large difference in DeltaDeltaG, we apportioned the calculated values of DeltaDeltaG and DeltaG for the associated and dissociated states into contributions from various atomic interactions. We found that the H-->F substitution increased the binding affinity mainly by decreasing the hydration free energy and not by increasing favorable interactions with the antibody. The decreased hydration free energy of the ligand was mainly due to unfavorable coulombic interactions between the trifluoroacetylamino group and solvent waters, which increased the free energy of the dissociated state (by about 3.7 kcal mol(-1)). Also, the trifluoroacetylamino group slightly increased the free energy level of the associated state (about 0.8 kcal mol(-1)) because favorable van der Waals interactions compensated for unfavorable coulombic interactions with antibody atoms. In addition, the enthalpy and entropy changes, DeltaDeltaH and -TDeltaDeltaS (computationally -6.3 and 3.5 kcal mol(-1)), originated mainly from a decrease in hydration free energy in the dissociated state. The CPD-F and CPD-H ligands had substantially different structures in the dissociated and complexed states.     

A concise route to the right wing of ciguatoxin

A concise route to the HIJKLM-ring fragment 10 of ciguatoxin (CTX) and 51-hydroxyCTX3C was developed in which oxiranyl anion addition and intramolecular carbonyl olefination were utilized as key transformations. The present procedure requires only 23 steps from the I-ring 5, while 35 steps were employed in a previous synthesis of the corresponding right wing 11 of CTX3C. The high efficiency of the present synthesis ensures a supply of 10 for total synthesis and biomedical applications.     

Solvothermal synthesis of large surface area zirconia

The reaction of zirconium n-propoxide in glycol at 300°C yielded microcrystalline tetragonal zirconia (ZrO₂). The crystallite size of the product depended on the carbon number of the glycol and increased in the following order (carbon number of glycol): 2<6<4, which suggested that the heterolytic cleavage of O-C bond of gylcoxide formed by transesterification is the prime factor for the formation of the product. In toluene, zirconium isopropoxide also gave tetragonal zirconia at 300°C, and zirconium tert-butoxide decomposed at 200°C yielding amorphous zirconia, while zirconium n-propoxide was stable at 300°C. These results suggest that the reaction in toluene depends on the structure of the alkyl group of the alkoxides. Thus-obtained tetragonal zirconias maintained large surface areas (90–160 m²/g) even after calcination at 500°C.     

Silylation of water glass. I. Solvent extraction and trimethylsilylation of silicic acid

Homogeneous trimethylsilylation of silicic acid in nonaqueous media was studied. The silylation process consisted of three steps: acidification of sodium silicate, solvent extraction. and trimethylation of silicic acid. Sodium silicate was first acidified with dilute sulfuric acid to form silicic acid: extraction followed with hydrophilic organic solvents. The Silicic acid obtained was finally allowed to react with trimethylchlorosilane to give trimethylsilylates with molecular weights of 1000–12,000. Optimum conditions for each step have been intensively sought to achieve trimethylsilylates in high yield. The trimethylsilylates exhibited excellent thermal stability and surface properties, such as water repellency and antifoaming properties, comparable to those of conventional polydimethylsiloxanes.