Potential formation and high density plasma production on the tandem mirror GAMMA 10

GAMMA 10 experiments have advanced in high density experiments after the last EPS Workshop where we reported high density plasma production by using an ion cyclotron range of frequency heating at a high harmonic frequency and neutral beam injection in the central cell. Recently a high density plasma was obtained with much improved reproducibility than before and without degradation of diamagnetic signal. The high density plasma was attained by adjusting the spacing of the conducting plates installed in the anchor transition regions. Dependencies of particle confinement time, ion energy confinement time and plasma confining potential on plasma density were obtained for the first time in the high density region. Presented at 5th Workshop “Role of Electric Fields in Plasma Confinement and Exhaust”, Montreus, Switzerland, June 23–24, 2002.     

Measurement of Fluorescence Quantum Yield of Ultraviolet-Absorbing Substance Extracted from Red Alga: Porphyra yezoensis and its Photothermal Spectroscopy

Optical properties of an ultraviolet-absorbing substance (UVAS) extracted from the marine red alga, Porphyra yezoensis, have been investigated. The substance is excited by UV light, and the emitted fluorescence is detected using an intelligent fluorescence detector. The fluorescence of UVAS is weaker by four orders of magnitude than the fluorescence intensity emitted by anthracene in the same optical system. The absorbed energy is apparently not transferred to the photosynthesis process and is believed to be consumed as heat. Using photothermal spectroscopy, a signal is observed indicating that the absorbed photon energy has transferred to the heat. The waveform of the photothermal signal of UVAS is similar to that of quinoxaline, whose fluorescence quantum yield is known to be zero. It is determined that the fluorescence quantum yield and the energy of the triplet state of UVAS are 1.7 ± 0.7 ± 10⁻⁴ and 21000 ± 1000 cm ⁻¹, respectively. The conclusion is that the excited molecules of UVAS decay by passing through the triplet state and dissipate all absorbed energy as heat.     

Performance evaluation of PVdF gel polymer electrolytes

A series of gel polymer electrolytes containing PVdF as homo polymer, a mixture of 1:1 Ethylene Carbonate (EC) : Propylene Carbonate (PC) as plasticizer and lithium-bistrifluoromethane sulphone imide [imide — LiN (CF₃SO₂)₂] has been developed. Amounts of polymer (PVdF), plasticizer and the imide lithium salt have been varied as a function of their weight ratio composition in this regard. Dimensionally stable films possessing appreciable room temperature conductivity values have been obtained with respect to certain weight ratio compositions. However, conductivity data have been recorded at different possible temperatures, i.e., from 20 °C to 65 °C. XRD and DSC studies were carried out to characterize the polymer films for better amorphicity and reduced glass transition temperature, respectively. The electrochemical interface stability of the PVdF based gel polymer electrolytes over a range of storage period (24 h – 10 days) have been investigated using A.C. impedance studies. Test cells containing Li/gel polymer electrolyte (GPE)/Li have been subjected to undergo 50 charge-discharge cycles in order to understand the electrochemical performance behaviour of the dimensionally stable films of superior conductivity. The observed capacity fade of less than 20% even after 50 cycles is in favour of the electrochemical stability of the gel polymer electrolyte containing 27.5% PVdF −67.5 % EC+PC −5% imide salt. Cyclic voltammetry studies establish the possibility of a reversible intercalation — deintercalation process involving Li⁺ ions through the gel polymer electrolyte.     

Transient behavior of heat removal from a cylindrical heat storage vessel packed with spherical porous particles

The transient heat transfer behavior in the case of heat removal from a cylindrical heat storage vessel packed with spherical particles was investigated experimentally for various factors (flow rate, diameter of spherical particles packed, temperature difference between flowing cold air and spherical particles accumulating heat, and physical properties of spherical particles). The experiments were covered in ranges of Reynolds number based on the mean diameter of spherical particles packed Re_d = 10.3–2200, porosity?=0.310 to 0.475, ratio of spherical particle diameter to cylinder diameterd/D = 0.0075–0.177 and ratio of length of the cylinder to cylinder diameterL/D=2.5–10. It was found that especially the flow rate and the dimension of spherical particles played an important role in estimating the transient local heat transfer characteristics near the wall of the cylindrical vessel in the present heat storage system. As flow rate and diameter of spherical particles were increased under a given diameter of the cylinder heat storage vessel, the mean heat transfer coefficient between the flow cold air and the hot spherical particles increased and the time period to finish removing heat from the vessel reduced. In addition, the useful experimental correlation equations of mean heat transfer coefficient between both phases and the time period to finish removing heat from the vessel were derived with the functional relationship of Nusselt numberNu _d=f [modified Prandtl numberPr ^* (d/D), Re_d) and Fourier numberFo = f(d/D, L/D, Pr^*, Re_d).     

Annealing of point defects in p-type germanium after electron irradiation at liquid nitrogen temperature

Annealing of radiation induced defects in p-type germanium was studied by measuring Hall coefficient and conductivity. The dopant was gallium or indium. It was concluded that the annealing stage between 80° and 140°K is caused by migration of the vacancy to the sink of an impurity atom. In this stage the vacancy migrates to a substitutional impurity atom and makes an association. The activation energy of the stage was found tO be 0.1 ev ad it is regarded to be that of the vacancy migration. The model for the annealing stage which occurs in the range 220 to 270°K is proposed as follows: An interstitial impurity atom migrates to a substitutional impurity atom and makes an association. From the activation energy of the stage, the migration energy of the interstitial impurity atom was concluded to be about 0.4 eV for gallium and 0.7 eV for indium atoms.     

Time-series analysis of foreign exchange rates using time-dependent pattern entropy

Time-dependent pattern entropy is a method that reduces variations to binary symbolic dynamics and considers the pattern of symbols in a sliding temporal window. We use this method to analyze the instability of daily variations in foreign exchange rates, in particular, the dollar–yen rate. The time-dependent pattern entropy of the dollar–yen rate was found to be high in the following periods: before and after the turning points of the yen from strong to weak or from weak to strong, and the period after the Lehman shock.