Amorphous solid-like distribution of polydisperse particles of colloidal clay and microcrystalline cellulose in deionized suspension

A metallurgical microscope is used to directly observe the amorphous solid-like structures of deionized suspensions of highly polydispersed colloids in sedimentation equilibrium. The colloids used are colloidal clay of bentonite and microcrystalline cellulose (MCC). The two-dimensional distance distribution functions of the amorphous solid-like structures at relatively diluted and concentrated suspensions resemble those of the liquid-like and gas-like structures of monodispersed spheres, respectively. The center-to-center interparticle distances (D) in the amorphous solid-like structures are explained by the effective hard-sphere model; a colloidal particle is coated with electrical double layers. The maximum length of the width of the double layers (Debye length,D ₁) observed is ca. 1n at very dilute suspensions.D andD ₁ continue to decrease as the initial concentration of the particles increases, and from these data rigidities are estimated to be 0.12 and 0.09 Pa for bentonite and MCC suspensions, respectively. The log [viscosity] of bentonite suspensions begins to increase linearly as log [shear rate] decreases with a slope close to –1, which supports the solid-like nature of the suspensions. These experimental results show that electrostatic interparticle repulsion and the elongated Debye-screening length around the particles are both essential for the appearance of the amorphous solid-like structures.     

Dissipative structures formed in the course of drying the colloidal crystals of silica spheres on a cover glass

Macroscopic and microscopic dissipative structural patterns formed in the course of drying the deionized aqueous colloidal crystal suspensions of silica spheres (diameter: 103 nm) on a cover glass have been observed. Spoke-like and ring-like patterns are formed in the macroscopic scale; the former is the crack in the sphere film and the latter is the hill accumulated with spheres formed around the outside edge. The neighbored inter-spoke angle, thickness of the film, and other morphological parameters have been discussed as a function of sphere concentration, concentration of sodium chloride, and the inclined angle of the cover glass. Fractal patterns of the mud cracks are observed in the microscopic scale. Capillary forces between spheres at the air-liquid surface and the relative rates between the water flow at the drying front and the convection flow of spheres are important for the pattern formation. Electronic Publication     

Ionic liquid crystal as a hole transport layer of dye-sensitized solar cells

Use of a new ionic liquid crystal, 1-dodecyl-3-methylimidazolium iodide, and iodine as an electrolyte of dye-sensitized solar cells leads to a high short circuit photocurrent density and a high light-to-electricity conversion efficiency, due to a self-assembled structure of the imidazolium cations, resulting in high conductivity of the electrolyte.     

Encapsulation of doxorubicin into liposomes by a freeze-thawing method using buffer solution

When doxorubicin was encapsulated into liposomes by freeze-thawing, the percentage of encapsulated doxorubicin (EN%) was found to vary according to the type of buffer solution used. The reason for this was investigated in the present report. Drug-free liposomes prepared by hydration were mixed with doxorubicin dissolved in a certain type of buffer solution that shows a pH decrease on freezing, and this mixture was subjected to freeze-thawing. Doxorubicin was encapsulated by the liposomes due to the difference in pH between freezing and thawing. EN% depended on the pH of the buffer solution before freezing and increased significantly at over pH 7. About 60% of doxorubicin was encapsulated into liposomes after the Ist freeze-thawing cycle, and EN% was increased gradually with the number of freeze-thawing cycles. The addition of sugar to the experimental system was seen to affect doxorubicin encapsulation and the particle size of liposomes.     

A synthesis of chiral 1,1,3-trisubstituted 1,2,3,4-tetrahydro-beta-carbolines by the Pictet-Spengler reaction of tryptophan and ketones: conversion of (1R,3S)-diastereomers into their (1S,3S)-counterparts by scission of the C(1)-N(2) bond

The Pictet-Spengler cyclization of the imines (3) prepared by the condensation of L-tryptophan methyl ester (1) and aryl methyl ketones (2), using titanium(IV) isopropoxide as an iminating reagent, quantitatively proceeded, when treated with trifluoroacetic acid (TFA) or formic acid, to provide two diastereomers, that is (1S,3S)-1-aryl-3-isopropoxycarbonyl-1-methyl-1,2,3,4-tetrahydro-beta-carbolines (4) and their (1R,3S)-diastereomers (5), of which the diastereomer ratios varied from 1 to 5 depending on the reaction conditions. The (1R,3S)-diastereomers (5) are thermodynamically more stable than their (1S,3S)-congeners (4), as shown by equilibration experiments in TFA. The conversion of 4 to 5 (also 5 to 4) should occur under acidic conditions by cleavage of the C(1)-N(2) bond with complete retention of configuration at the C-3 chiral center. The low diastereo-selectivity observed in the Pictet-Spengler reaction of 1 and 2 is concluded to be a stereochemical outcome under conditions of kinetic control (lower temperature, shorter reaction time), while the high diastereo selectivity with preferential formation of the more stable isomer (5) is the result of thermodynamically controlled experiments (higher temperature, longer reaction time).     

Reactive oligomers. II. Polymerization of glycol bis(allyl phthalate)s and glycol bis(allyl succinate)s

Seven glycol bis(allyl phthalate)s (GBAP) and four glycol bis(allyl succinate)s (GBASu) as reactive oligomers were prepared and their polymerization behaviors were investigated in detail in terms of cyclopolymerization and gelation as compared with diallyl dicarboxylates. Thus, the rates of polymerization of GBAPs were reduced compared to diallyl phthalate, being attributed to the steric effect on the intermolecular propagation of the uncyclized radical, whereas those of GBASus were enhanced as a consequence of intermolecular association by dipole–dipole interaction in polar GBASu monomers. Cyclization was enhanced in the following order: diallyl aliphatic dicarboxylates series < GBASu series < GBAP series. Gelation was discussed according to Gordon's theory; the actual gel-point conversions increased with an increase in the molecular weight of monomers, although the discrepancy between actual and theoretical gel-point conversion inversely tended to be decreased. The decreased delay in gelation with an increase of the molecular weight of monomers is ascribed to the reduction of excluded volume effects on crosslinking.     

Synthesis of stable and cell-type selective analogues of cyclic ADP-ribose, a Ca(2+)-mobilizing second messenger. Structure--activity relationship of the N1-ribose moiety

We previously developed cyclic ADP-carbocyclic ribose (cADPcR, 2) as a stable mimic of cyclic ADP-ribose (cADPR, 1), a Ca(2+)-mobilizing second messenger. A series of the N1-ribose modified cADPcR analogues, designed as novel stable mimics of cADPR, which were the 2"-deoxy analogue 3, the 3"-deoxy analogue 4, the 3"-deoxy-2"-O-(methoxymethyl) analogue 5, the 3"-O-methyl analogue 6, the 2",3"-dideoxy analogue 7, and the 2",3"-dideoxydidehydro analogue 8, were successfully synthesized using the key intramolecular condensation reaction with phenylthiophosphate-type substrates. We investigated the conformations of these analogues and of cADPR and found that steric repulsion between both the adenine and N9-ribose moieties and between the adenine and N1-ribose moieties was a determinant of the conformation. The Ca(2+)-mobilizing effects were evaluated systematically using three different biological systems, i.e., sea urchin eggs, NG108-15 neuronal cells, and Jurkat T-lymphocytes. The relative potency of Ca(2+)-mobilization by these cADPR analogues varies depending on the cell-type used: e.g., 3"-deoxy-cADPcR (4) > cADPcR (2) > cADPR (1) in sea urchin eggs; cADPR (1) > cADPcR (2) approximately 3"-deoxy-cADPcR (4) in T-cells; and cADPcR (2) > cADPR (1) > 3"-deoxy-cADPcR (4) in neuronal cells, respectively. These indicated that the target proteins and/or the mechanism of action of cADPR in sea urchin eggs, T-cells, and neuronal cells are different. Thus, this study represents an entry to cell-type selective cADPR analogues, which can be used as biological tools and/or novel drug leads.     

Gas permeation of porous organic/inorganic hybrid membranes

Selective gas permeation of porous organic/inorganic hybrid membranes via sol-gel route and its thermal stability are described. Separation performance of the hybrid membrane was improved compared with porous membranes governed by the Knudsen flow, and gas permeability was still much higher than that through nonporous membranes. Additionally, it was shown that these membranes were applicable at higher temperatures than organic membranes.SEM observation demonstrated that the thin membrane was crack-free. Nitrogen physisorption isotherms showed the pore size was in the range of nanometers. Gas permeability through this membrane including phenyl group was in the range of 10^–8 [cc(STP) cm/(cm² s cmHg)] at 25°C. The ratios of O₂/N₂ and CO₂/N₂ were 1.5 and 6.0, respectively, showing the permeation was not governed by the Knudsen flow. The permeability decreased as the temperature increased. Furthermore, the specific affinity between gas molecules and surface was observed not only in the permeation data of the hybrid membranes but in the physisorption data. These results suggested that the gas permeation through the hybrid membrane was governed by the surface flow mechanism.Thermal analysis indicated that these functional groups were still stable at higher temperatures. The phenyl group especially remained undamaged even at 400°C.     

Reactive oligomers. I. Preparation and polymerization of ethylene glycol bis(methyl fumarate)

Ethylene glycol bis(methyl fumarate) (EGBMF) was prepared as a new type of divinyl compound and reactive oligomer: a needle crystal, m.p. 104.5°C. Homopolymerization of EGBMF was carried out in dioxane with 0.1 mol/L AIBN at [M] = 1 mol/L and 60°C; the rate of polymerization was estimated to be 4.44 × 10^?6 mol/L s in a good agreement with diethyl fumarate (DEF). The cyclization constant K_c was obtained as 1.64 mol/L, being rather low compared with diallyl oxalate which is 1,9-diene having two ester groups analogous to EGBMF. Gelatin occurred at about 35% conversion. Finally, the copolymerization of EGBMF (M₁) with diallyl phthalate (DAP) (M₂) is tentatively explored with the intention of the improvement of allyl resins in mechanical properties; remarkable rate enhancement was observed for copolymerization. The monomer reactivity ratios were estimated to be r₁ = 0.96 and r₂ = 0.025, the r₁ value being reduced compared with the DEF-DAP copolymerization system. These results are discussed from the standpoint of steric effect on the polymerization of fumarate as an internal olefin.     

Recent progress in the improvement of hydrothermal stability of zeolites

Zeolites have been successfully employed in many catalytic reactions of industrial relevance. The severe conditions required in some processes, where high temperatures are frequently combined with the presence of steam, highlight the need of considering the evolution of the catalyst structure during the reaction. This review attempts to summarize the recently developed strategies to improve the hydrothermal framework stability of zeolites.

This review attempts to summarize the recently developed strategies to improve the hydrothermal framework stability of zeolites.