Colloidal crystals of core-shell type spheres with poly(styrene) core and poly(ethylene oxide) shell

Elastic modulus and crystal growth kinetics have been studied for colloidal crystals of core–shell type colloidal spheres (diameter = 160–200 nm) in aqueous suspension. Crystallization properties of three kinds of spheres, which have poly(styrene) core and poly(ethylene oxide) shell with different oxyethylene chain length (n = 50, 80 and 150), were examined by reflection spectroscopy. The suspensions were deionized exhaustively for more than 1 year using mixed bed of ion-exchange resins. The rigidities of the crystals range from 0.11 to 120 Pa and from 0.56 to 76 Pa for the spheres of n = 50 and 80, respectively, and increase sharply as the sphere volume fraction increase. The g factor, parameter for crystal stability, range from 0.029 to 0.13 and from 0.040 to 0.11 for the spheres of n = 50 and 80, respectively. These g values indicate the formation of stable crystals, and the values were decreased as the sphere volume fraction increased. Two components of crystal growth rate coefficients, fast and slow, were observed in the order from 10⁻³ to 10¹ s⁻¹. This is due to the secondary process in the colloidal crystallization mechanism, corresponding to reorientation from metastable crystals formed in the primary process and/or Ostwald-ripening process. There are no distinct differences in the structural, kinetic and elastic properties among the colloidal crystals of the different core–shell size spheres, nor difference between those of core–shell spheres and silica or poly(styrene) spheres. The results are very reasonably interpreted by the fact that colloidal crystals are formed in a closed container owing to long-range repulsive forces and the Brownian movement of colloidal spheres surrounded by extended electrical double layers, and their formation is not influenced by the rigidity and internal structure of the spheres.     

Rheological properties of deionized Chinese ink

Rheological properties for Chinese ink in exhaustively deionized aqueous media were carefully examined. In the steady shear measurement, the shear viscosities of the ink could be well explained by considering the “effective” volume fraction of the particles in the ink including the electrical double layers and by using Einstein's equation for dilute suspension viscosity, when the particle volume fraction was substantially low. In the case that the volume fraction was higher, the shear viscosities showed extremely higher than those from Einstein's prediction, though the ink remained a Newtonian liquid. In the stress-strain measurement, the shear moduli were observed at strain smaller than 0.2. The “weak” aggregation among the particles in the ink under no shear or low shear rates was supported. It should be noted that the glue in the suspension plays an important role for the good liquidity of the ink and for the “weak” bridges among the particles resulting its good dispersion stability.     

Excellent Redox Properties of Poly(thienylphenylamine)s

Triphenylamines with thienyl groups are electro‐oxidatively polymerized to yield the corresponding branched polymers on an electrode. The resulting polymers show significantly better redox properties, such as redox activity, catalytic activity, and conductivity when compared with for example the linear polymeric analog. The good properties of the branched polymers are based on the higher electronic conductivity (2–6 S/cm), since the branching provides multiple routes for charge carriers. The redox‐active polymers show high capacity (ca. 40 mC/cm²) and catalytic activity for the electron transfer of ferrocene on the electrode.     

Lamellar thickening in nascent poly(acrylonitrile) upon annealing

No systematic study has been reported on the lamellar thickening in atactic poly(acrylonitrile) (PAN) upon annealing because PAN, in the form of solution‐cast films or their drawn products, generally shows no small‐angle X‐ray scattering (SAXS) maximum corresponding to the lamellar thickness. In this work, PAN crystals were precipitated during the thermal polymerization of acrylonitrile in solution. The nascent PAN film, obtained by the filtration of the crystal suspension, exhibited a clear SAXS maximum revealing the lamellar structure. The lamellar thickening upon annealing of the nascent PAN films was studied in the temperature range 100–180 °C, where the degradation was minimal, as confirmed by the absence of an IR absorption band at 1605 cm⁻¹ ascribed to the cyclized nitrile groups. Above 190 °C, the degradation of the samples was significant, and the SAXS became too broad to determine the scattering maximum. The long period was significantly affected by the annealing time (t_a) and the temperature (T_a). Depending on t_a, three stages were observed for the lamellar thickening behavior. The lamellar thickness stayed constant in stage I (t_a = 0.5–3 min, depending on T_a), rapidly increased in stage II (t_a = 0.5–8 min), and stayed at a constant value characteristic for each T_a at yet longer t_a's in stage III. The lamellar thickness characteristic for T_a increased rapidly with increasing T_a at 165 °C (or higher), which was 152 °C lower than the estimated melting temperature of PAN (T_m = 317 °C). A possible mechanism for such lamellar thickening in PAN far below the T_m is discussed on the basis of the enhanced chain mobility in the crystalline phase above the crystal/crystal reversible transition at 165–170 °C detected by differential scanning calorimetry and wide‐angle X‐ray diffraction. The structural changes associated with annealing are also discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2571–2579, 2000     

Enzymatic activity of trypsin adsorbed on temperature-sensitive composite polymer particles

Two kinds of temperature-sensitive composite polymer particles were prepared by seeded emulsion copolymerizations of (dimethylamino)ethyl methacrylate and ethylene glycol dimethacrylate with 0.14 μm-sized polystyrene and 0.26 μm-sized poly(methylmethacrylate) seed particles. To evaluate the usefulness as a carrier for biomolecules, the enzymatic activities of trypsin adsorbed on these two composite polymer particles were measured at temperatures above and below each lower critical solution temperature (LCST). In both cases, adsorbed trypsin retained its enzymatic activity during repeated adsorption/desorption measurements. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 883–888, 1998     

Enhancement of electroluminescence intensity in poly(3-alkylthiophene) with different alkyl side-chain length by doping of fluorescent dye

Electroluminescent diodes utilizing poly(3-alkylthiophene) (PAT) containing fluorescent dyes have been fabricated and their unique enhancement of emission characteristics have been studied. Remarkable enhancement of the electroluminescence efficiency has been observed for diodes with PAT doped with oxadiazole derivative (2-(4-biphenylyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole; PBD) and perylene derivative (N,N′ - Bis(2,5 - di - tert - butylphenyl) - 3,4,9,10 - perylenedi- carboximide; BPPC). The mechanism of emission enhancement by doping of PBD into PAT has been discussed with different alkyl side-chain lengths. © 1997 John Wiley & Sons, Ltd.     

A novel redox system consisting of π-conjugated polymers and transition metals

Coordination of π-conjugated polymers to transition metals constructs a novel redox system due to interchangeable various oxidation states of the polymers, which permits transition metals to interact with each other through a π-conjugate chain. The redox characteristics were found to depend on the electronic interaction with metals and the doping. A combination of copper(II) or iron(III) chloride and polyanilines afforded the complex catalysts with the higher oxidation capability for dehydrogenative oxidation. A catalytic system was also realized in the transition-metal-induced oxidation reaction, in which π-conjugated polymers serve as redox-active ligands participating in the reversible redox cycle. The Wacker oxidation of terminal olefins proceeded catalytically in the presence of a catalytic amount of polyaniline or polypyrrole derivative under oxygen.     

A protocol for searching the most probable phase‐retrieved maps in coherent X‐ray diffraction imaging by exploiting the relationship between convergence of the retrieved phase and success of calculation

Coherent X‐ray diffraction imaging (CXDI) is a technique for visualizing the structures of non‐crystalline particles with size in the submicrometer to micrometer range in material sciences and biology. In the structural analysis of CXDI, the electron density map of a specimen particle projected along the direction of the incident X‐rays can be reconstructed only from the diffraction pattern by using phase‐retrieval (PR) algorithms. However, in practice, the reconstruction, relying entirely on the computational procedure, sometimes fails because diffraction patterns miss the data in small‐angle regions owing to the beam stop and saturation of the detector pixels, and are modified by Poisson noise in X‐ray detection. To date, X‐ray free‐electron lasers have allowed us to collect a large number of diffraction patterns within a short period of time. Therefore, the reconstruction of correct electron density maps is the bottleneck for efficiently conducting structure analyses of non‐crystalline particles. To automatically address the correctness of retrieved electron density maps, a data analysis protocol to extract the most probable electron density maps from a set of maps retrieved from 1000 different random seeds for a single diffraction pattern is proposed. Through monitoring the variations of the phase values during PR calculations, the tendency for the PR calculations to succeed when the retrieved phase sets converged on a certain value was found. On the other hand, if the phase set was in persistent variation, the PR calculation tended to fail to yield the correct electron density map. To quantify this tendency, here a figure of merit for the variation of the phase values during PR calculation is introduced. In addition, a PR protocol to evaluate the similarity between a map of the highest figure of merit and other independently reconstructed maps is proposed. The protocol is implemented and practically examined in the structure analyses for diffraction patterns from aggregates of gold colloidal particles. Furthermore, the feasibility of the protocol in the structure analysis of organelles from biological cells is examined.