The effect of various calcination treatments on the photocatalytic activity of a rod-type TiO<Subscript>2</Subscript> electrode for oxidation of ethanethiol

It was found that the photoelectrochemical performance and photocatalytic activity of rod-type TiO₂ electrodes were affected by various post-calcination treatments, for example, calcination in NH₃ or under vacuum. Post-calcination treatment in NH₃ at 773 K was particularly effective in increasing the photoelectrochemical performance and photocatalytic activity of rod-type TiO₂ electrodes. A unique photoelectrochemical circuit was constructed by connecting a rod-type TiO₂ electrode to a Pt electrode through a silicon solar cell in which the negative bias was applied on the rod-type TiO₂ electrode. It was found that the photoelectrochemical circuit can effectively oxidize ethanethiol in water into CO₂.     

A novel synthesis of half-protected 1,3-dicarbonyl compounds

It has been found that the reaction of enol silyl ethers with 2-ethoxy-1,3-dithiolane proceeds smoothly in the presence of zinc chloride catalyst to afford half-protected 1,3-dicarbony1 compounds in moderately good yields.     

Hydrogen chemisorption on Ni(110) by high-resolution electron energy loss spectroscopy

High-resolution electron energy loss spectra of hydrogen-covered Ni(110) surfaces both at 100 and 300 K are presented. The adsorbed sites of hydrogen atoms are discussed.High-resolution electron energy loss spectra of hydrogen covered Ni(110) surfaces have been studied. Tentative models for the adsorbed sites of hydrogen atoms are as follows: (1) For the (2 × 1)-H surface, hydrogen is adsorbed in the three-coordinated sites of the rudimentary (111) face of the unreconstructed Ni(110) substrate. (2) For the low-temperature (1 × 2)-H surface, hydrogen is adsorbed in the three-coordinated sites and, probably, in the two-fold hollow sites of the distorted Ni(110) substrate. (3) For the room-temperature (1 × 2)-H surface, hydrogen is disorderedly adsorbed in the three-coordinated, two-fold hollow and short-bridge sites and, possibly, in the octahedral sites of the distorted Ni(110) substrate. Some of the unresolved problems in the above assignments are summarized: (1) Strictly, the three-coordinated sites above are somewhat different from those discussed in the molecular-beam diffraction study [5]. (2) For the low-temperature (1 × 2)-H surface, the loss associated with hydrogen in the two-fold hollow sites is apparently not observed. (3) Intensity changes of the three losses for the room-temperature (1 × 2)-H surface with increasing hydrogen pressure (Fig. 2) are not well understood.     

Aggregation states and surface wettability in films of poly(styrene-block-2-perfluorooctyl ethyl acrylate) diblock copolymers synthesized by atom transfer radical polymerization

Well-defined poly(styrene-block-2-perfluorooctyl ethyl acrylate) [P(St-b-PFA)] copolymers with various chemical compositions were synthesized by atom transfer radical polymerization. Films of P(St-b-PFA) were structurally characterized, from bulk to surface, on the basis of transmittance electron microscopic observation and small-angle X-ray scattering, X-ray photoelectron spectroscopic, and contact angle measurements. For a comparison, poly(styrene-random-2-perfluorooctyl ethyl acrylate) [P(St-ran-PFA)] copolymers were also synthesized by conventional free radical polymerization. While P(St-b-PFA) with the 2-perfluorooctyl ethyl acrylate (PFA) content higher than 18.7 mol % formed a typical phase-separated cylinder structure, P(St-b-PFA) with a lower PFA content and P(St-ran-PFA) were in a miscible state. Since the perfluoroalkyl groups possess extremely low surface energy, they were preferentially segregated at the film surface, resulting in the formation of the PFA surface layer. This was the case for all P(St-b-PFA) films examined, although the aggregation state at the surface was strongly dependent on the PFA content. In the case of the P(St-b-PFA) with the PFA content higher than 18.7 mol %, both advancing and receding contact angles for water were 120 degrees and even larger with almost no hysteresis. In addition, extremely excellent oil-repellent surface properties such as advancing and receding contact angles for dodecane of 76 degrees and 75 degrees were also observed. However, these intriguing liquid-repellent properties were not observed for the films of miscible P(St-b-PFA) and P(St-ran-PFA). Therefore, it can be concluded that the internal structure beneath the surface as well as the surface itself should be deeply considered to design excellent and stable liquid-repellent materials.     

Creation of hoop- and bowl-shaped benzenoid systems by selective detraction of [60]fullerene conjugation. [10]cyclophenacene and fused corannulene derivatives

Selective penta-addition of a methylcopper reagent followed by addition of a phenylcopper reagent to a suitably modified synthetic intermediate results in creation of 40pi-electron systems-hoop- and bowl-shaped cyclic benzenoid compounds, [10]cyclophenacene, and dibenzo-fused corannulene derivatives. The 40pi-electron cyclophenacene derivatives have been found to be chemically stable, yellow-colored, luminescent (560 nm), and EPR-silent. X-ray crystallographic analysis provided precision structural data sets. The dibenzo-fused corannulene derivatives exhibit blue-green (460 nm) to red (649 nm) fluorescence.     

Molecular optical gating devices based on polymer nanosheets assemblies

We describe here a polymer nanosheet assembly that serves as a molecular photoswitching and optical exclusive OR (EXOR) logic gate. Separate polymer nanosheets (monolayers) containing phenanthrene, anthracene, and dinitrobenzene chromophore were prepared by the Langmuir-Blodgett technique (LB films). A bilayer-couple, consisting of phenanthrene (sensitizer) monolayer and dinitrobenzene (acceptor) monolayer, and the other couple, of anthracene monolayer and dinitrobenzene monolayer, were confirmed to function as a photodiode showing current rectification on light irradiation. The two photodiodes are connected as each photocurrent direction becomes opposite. In the polymer photodiode array (LB films), anodic photocurrent was observed when the anthracene was selectively excited. On the other hand, cathodic photocurrent was observed by selective excitation of the phenanthrene. Moreover, the output photocurrent displayed a very small value when the phenanthrene and anthracene were excited simultaneously. The performance is discussed for this gate's application to an optical EXOR logic gate.     

A novel action of terpendole E on the motor activity of mitotic Kinesin Eg5

To reveal the mechanism of mitosis, the development of M phase-specific inhibitors is an important strategy. We have been screening microbial products to find specific M phase inhibitors that do not directly target tubulins, and rediscovered terpendole E (TerE) as a novel Eg5 inhibitor. TerE did not affect microtubule integrity in interphase, but induced formation of a monoastral spindle in M phase. TerE inhibited both motor and microtubule-stimulated ATPase activities of human Eg5, but did not affect conventional kinesin from either Drosophila or bovine brain. Although terpendoles have been reported as inhibitors of acyl-CoA:cholesterol O-acyltransferase (ACAT), the Eg5 inhibitory activity of TerE was independent of ACAT inhibition. Taken together, we demonstrate that TerE is a novel Eg5 inhibitor isolated from a fungal strain.     

The Super-Kamiokande experiment

Super-Kamiokande has accumulated data on atmospheric neutrinos and solar neutrinos for 1117–1289 live days. We present updated results on the flavor ratio, the zenith angle distribution of atmospheric neutrinos and the zenith angle distribution of upward going muons. We also present results on the energy spectrum and the day–night variation of solar neutrinos. The data on atmospheric neutrinos show clear evidence of neutrino oscillation.