Enantioselective Morita–Baylis–Hillman reaction catalyzed by a chiral phosphine oxide

An application of a hypervalent silicon complex, generated from a chiral phosphine oxide catalyst and silicon tetrachloride, to the enantioselective organocatalytic Morita–Baylis–Hillman reaction is described. A chloride anion liberated from the hypervalent silicon complex smoothly generated a γ-chloro silyl enol ether that subsequently reacted with an aldehyde to afford the Baylis–Hillman adducts in good yields and with good enantioselectivities.     

Dibenzoarsepins: Planarization of 8π‐Electron System in the Lowest Singlet Excited State

Dibenzo[b,f]arsepins possessing severely distorted cores compared to those of other heteropins were synthesized. These derivatives exhibited dual photoluminescence in the green‐to‐red region (500–700 nm) and the near‐ultraviolet region (<380 nm), which could be attributed to the planarization of the arsepin core in the lowest singlet excited (S₁) state. The computational approach for the assessment of the aromatic indices revealed that the dibenzoarsepins studied show aromaticity (8π system) in the S₁ states in line with Baird's rule. The lone pair electrons of the arsenic atoms play a crucial role in the aromaticity in the S₁ states.     

Second-order perturbational treatment of normal coordinates in the string model for the hydration reaction of formaldehyde

A perturbation theory for normal coordinates of nonadiabatic solvation is presented by means of the “string model” of chemical reactions. The dynamic normal coordinate is introduced for the perturbational treatment of the “intrinsic” normal coordinates that are orthogonal to the reaction path. The reaction is defined as the intrinsic reaction coordinate (IRC ) that is treated as a string. The string is thrown in the external force field that acts as a nonadiabatic source of perturbation. As an application of the present treatment, the effect of a water molecule for hydration reaction of formaldehyde is calculated. A second-order perturbation effect for the enhancement of the reaction rate is found.     

Preparation and Regioselective Metalation of Bis(trimethylsilyl)methyl‐Substituted Aryl Derivatives

A range of bis(trimethylsilyl)methyl‐substituted aryl derivatives was prepared by using a Kumada–Corriu cross‐coupling reaction. The regioselective metalation of the resulting bis(trimethylsilyl)methyl‐substituted aryl derivatives bearing this bulky silyl group allowed the generation of functionalized aromatics. A regioselective switch in the presence or in the absence of the bis(trimethylsilyl)methyl group has been demonstrated. Furthermore, this silyl group was converted into a formyl group or a styryl group, enhancing the scope of application of such bis(trimethylsilyl)methyl‐substituted arenes.     

The effect of various calcination treatments on the photocatalytic activity of a rod-type TiO<Subscript>2</Subscript> electrode for oxidation of ethanethiol

It was found that the photoelectrochemical performance and photocatalytic activity of rod-type TiO₂ electrodes were affected by various post-calcination treatments, for example, calcination in NH₃ or under vacuum. Post-calcination treatment in NH₃ at 773 K was particularly effective in increasing the photoelectrochemical performance and photocatalytic activity of rod-type TiO₂ electrodes. A unique photoelectrochemical circuit was constructed by connecting a rod-type TiO₂ electrode to a Pt electrode through a silicon solar cell in which the negative bias was applied on the rod-type TiO₂ electrode. It was found that the photoelectrochemical circuit can effectively oxidize ethanethiol in water into CO₂.     

Aggregation states and surface wettability in films of poly(styrene-block-2-perfluorooctyl ethyl acrylate) diblock copolymers synthesized by atom transfer radical polymerization

Well-defined poly(styrene-block-2-perfluorooctyl ethyl acrylate) [P(St-b-PFA)] copolymers with various chemical compositions were synthesized by atom transfer radical polymerization. Films of P(St-b-PFA) were structurally characterized, from bulk to surface, on the basis of transmittance electron microscopic observation and small-angle X-ray scattering, X-ray photoelectron spectroscopic, and contact angle measurements. For a comparison, poly(styrene-random-2-perfluorooctyl ethyl acrylate) [P(St-ran-PFA)] copolymers were also synthesized by conventional free radical polymerization. While P(St-b-PFA) with the 2-perfluorooctyl ethyl acrylate (PFA) content higher than 18.7 mol % formed a typical phase-separated cylinder structure, P(St-b-PFA) with a lower PFA content and P(St-ran-PFA) were in a miscible state. Since the perfluoroalkyl groups possess extremely low surface energy, they were preferentially segregated at the film surface, resulting in the formation of the PFA surface layer. This was the case for all P(St-b-PFA) films examined, although the aggregation state at the surface was strongly dependent on the PFA content. In the case of the P(St-b-PFA) with the PFA content higher than 18.7 mol %, both advancing and receding contact angles for water were 120 degrees and even larger with almost no hysteresis. In addition, extremely excellent oil-repellent surface properties such as advancing and receding contact angles for dodecane of 76 degrees and 75 degrees were also observed. However, these intriguing liquid-repellent properties were not observed for the films of miscible P(St-b-PFA) and P(St-ran-PFA). Therefore, it can be concluded that the internal structure beneath the surface as well as the surface itself should be deeply considered to design excellent and stable liquid-repellent materials.     

Creation of hoop- and bowl-shaped benzenoid systems by selective detraction of [60]fullerene conjugation. [10]cyclophenacene and fused corannulene derivatives

Selective penta-addition of a methylcopper reagent followed by addition of a phenylcopper reagent to a suitably modified synthetic intermediate results in creation of 40pi-electron systems-hoop- and bowl-shaped cyclic benzenoid compounds, [10]cyclophenacene, and dibenzo-fused corannulene derivatives. The 40pi-electron cyclophenacene derivatives have been found to be chemically stable, yellow-colored, luminescent (560 nm), and EPR-silent. X-ray crystallographic analysis provided precision structural data sets. The dibenzo-fused corannulene derivatives exhibit blue-green (460 nm) to red (649 nm) fluorescence.     

Molecular optical gating devices based on polymer nanosheets assemblies

We describe here a polymer nanosheet assembly that serves as a molecular photoswitching and optical exclusive OR (EXOR) logic gate. Separate polymer nanosheets (monolayers) containing phenanthrene, anthracene, and dinitrobenzene chromophore were prepared by the Langmuir-Blodgett technique (LB films). A bilayer-couple, consisting of phenanthrene (sensitizer) monolayer and dinitrobenzene (acceptor) monolayer, and the other couple, of anthracene monolayer and dinitrobenzene monolayer, were confirmed to function as a photodiode showing current rectification on light irradiation. The two photodiodes are connected as each photocurrent direction becomes opposite. In the polymer photodiode array (LB films), anodic photocurrent was observed when the anthracene was selectively excited. On the other hand, cathodic photocurrent was observed by selective excitation of the phenanthrene. Moreover, the output photocurrent displayed a very small value when the phenanthrene and anthracene were excited simultaneously. The performance is discussed for this gate's application to an optical EXOR logic gate.     

A novel action of terpendole E on the motor activity of mitotic Kinesin Eg5

To reveal the mechanism of mitosis, the development of M phase-specific inhibitors is an important strategy. We have been screening microbial products to find specific M phase inhibitors that do not directly target tubulins, and rediscovered terpendole E (TerE) as a novel Eg5 inhibitor. TerE did not affect microtubule integrity in interphase, but induced formation of a monoastral spindle in M phase. TerE inhibited both motor and microtubule-stimulated ATPase activities of human Eg5, but did not affect conventional kinesin from either Drosophila or bovine brain. Although terpendoles have been reported as inhibitors of acyl-CoA:cholesterol O-acyltransferase (ACAT), the Eg5 inhibitory activity of TerE was independent of ACAT inhibition. Taken together, we demonstrate that TerE is a novel Eg5 inhibitor isolated from a fungal strain.     

Molecular orientation of azobenzene chromophores in ultrathin polymer nanosheets studied by attenuated total reflection spectroscopy

This paper describes characterization of molecular orientation for azobenzene moieties in a polymer nanosheet. Copolymers of N-[4-(phenylazo)phenyl] acrylamide (PAZoA) with tert-pentyl acrylamide (tPA) were synthesized and the monolayers deposited on tapered quartz waveguides by Langmuir–Blodgett (LB) technique. Spectroscopic properties of the copolymer (p(tPA/PAZoA)) monolayers were monitored by integrated optical waveguide technique on the molecular level. Molecular orientation of the azobenzene was precisely determined by polarized absorption spectra. It was found that the azobenzene groups took a horizontal orientation and distributed uniformly in the p(tPA/PAZoA) monolayer without significant PAZoA aggregation. Photoisomerization process from trans to cis form was also investigated. More than half of the trans form (60–70%) was photoisomerized under unpolarized light irradiation, and the photoisomerization rate was independent on the PAZoA contents. This implies that the microenvironment of PAZoA moieties was almost the same in three different p(tPA/PAZoA) monolayers.