Fixation of a cholesteric helical structure by the photopolymerization of a cholesteryl derived monomer

A cholesteryl derived monomer was synthesized according to a conventional synthetic route; it exhibits a cholesteric phase above 129°C, and shows a red colour due to selective reflection in the cholesteric phase. Photopolymerization of the monomer was carried out at 135°C in the cholesteric phase. The helical structure of the cholesteric phase of the monomer was frozen by photopolymerization. A peak based on the selective reflection of the cholesteric phase was detected at 615 nm in the transmittance UV-Vis spectrum. Mixtures of the monomer with a binaphthyl derivative were prepared to control the selective reflection wavelength; they all also exhibited a cholesteric phase. The selective reflection wavelength of the mixture was dependent upon the ratio of the binaphthyl derivative in the mixture. This wavelength became shorter with increasing ratio of the binaphthyl derivative. The polymer films obtained by photopolymerization displayed almost the same selective reflection wavelength as the corresponding mixtures before photopolymerization. The selective reflection wavelength of the polymer films did not change up to about 250°C.     

Baryogenesis in false vacuum

The null result in the LHC may indicate that the standard model is not drastically modified up to very high scales, such as the GUT/string scale. Having this in the mind, we suggest a novel leptogenesis scenario realized in the false vacuum of the Higgs field. If the Higgs field develops a large vacuum expectation value in the early universe, a lepton number violating process is enhanced, which we use for baryogenesis. To demonstrate the scenario, several models are discussed. For example, we show that the observed baryon asymmetry is successfully generated in the standard model with higher-dimensional operators.     

Decomposition of Insoluble and Hard-to-Degrade Animal Proteins by Enzyme E77 and Its Potential Applications

Insoluble and hard-to-degrade animal proteins are group of troublesome proteins, such as collagen, elastin, keratin, and prion proteins that are largely generated by the meat industry and ultimately converted to industrial wastes. We analyzed the ability of the abnormal prion protein-degrading enzyme E77 to degrade insoluble and hard-to-degrade animal proteins including keratin, collagen, and elastin. The results indicate that E77 has a much higher keratinolytic activity than proteinase K and subtilisin. Maximal E77 keratinolytic activity was observed at pH 12.0 and 65 °C. E77 was also adsorbed by keratin in a pH-independent manner. E77 showed lower collagenolytic and elastinolytic specificities than proteinase K and subtilisin. Moreover, E77 treatment did not damage collagens in ovine small intestines but did almost completely remove the muscles. We consider that E77 has the potential ability for application in the processing of animal feedstuffs and sausages.     

The synthesis and crystal structure of a new diprotonated Schiff base cryptand

Abstract

The synthesis and crystal structure of the diprotonated cryptand derived from the reaction of tren and 2,6-diacetyl pyridine is reported. The imino nitrogens of the Schiff base linkages are directed so that the dicarbimine functions are in trans, trans geometry relative to the pyridine C-N bond. This configuration has not previously been reported in related pyridine-derived Schiff base macrocycles.     

Fully automated reagent peak‐free liquid chromatography fluorescence analysis of highly polar carboxylic acids using a column‐switching system and fluorous scavenging derivatization

In this study, we combined a column‐switching system with a fluorous scavenging derivatization method to develop a fully automated reagent peak‐free LC fluorescence detection protocol for the analysis of highly polar carboxylic acids. In this method, highly polar carboxylic acids were derivatized with fluorescent 1‐pyrenemethylamine in the presence of 1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide and 1‐hydroxy‐1H‐benzotriazole. Residual excess of the unreacted reagent was tagged with 2‐(perfluorooctyl)ethyl isocyanate and then removed selectively using a fluorous column‐switching system placed in front of an analytical reversed‐phase column. The signal of the fluorous‐tagged unreacted reagent was completely absent in the resulting chromatograms; therefore, it did not interfere with the quantification of each acid especially those eluted before 20 min. The detection limits (S/N = 3) for the examined acids were in the range from 4.0 to 22 fmol per injection. We have applied this method to comparative analysis of highly polar carboxylic acids in urine samples obtained from diabetes mellitus type‐II model mice and their control.     

Time Courses and Time‐Resolved Spectra of Firefly Bioluminescence Initiated by Two Methods of ATP Injection and Photolysis of Caged ATP

The time‐dependent characteristics of firefly bioluminescence initiated by manual injection of adenosine triphosphate (ATP) into buffer solution containing luciferin (Ln), luciferase (Luc) and Mg²⁺ were measured with a resolution of 10 ms, and compared with those obtained by photolysis of caged ATP. The time course depends on pH; both rise and decay rates decrease when pH is lowered from 7.8 to 6.8. In contrast, the parameter λ in the kinetic formula related to diffusion of ATP is almost independent of pH. The pH dependence of the time course of bioluminescence can be explained by the same pH tendency as the rate of ATP binding at the active site of Luc. The time‐resolved spectra can be decomposed into two Gaussian components with maxima at 2.2 and 2.0 eV. At pH 7.8, the band at 2.2 eV is more intense than that at 2.0 eV for all three concentration conditions. At lower pH, the band at 2.2 eV becomes weaker than that at 2.0 eV. The intensity ratio of the 2.0 and 2.2 eV bands is constant for duration time of 600 s for both injection and photolysis experiments, and the above conclusions are unaffected by the concentration ratio [Ln]/[Luc].     

Synthesis of chiral 2-(anilinophenylmethyl)pyrrolidines and 2-(anilinodiphenylmethyl)pyrrolidine and their application to enantioselective borane reduction of prochiral ketones as chiral catalysts

Chiral diamines, 2-(anilinophenylmethyl)pyrrolidines and 2-(anilinodiphenylmethyl)pyrrolidine, were prepared from N-(tert-butoxycarbonyl)pyrrolidine or (S)-proline as a starting material, respectively. These chiral diamines were efficient for the catalytic enantioselective borane reduction of acetophenone. Using (S)-2-(anilinodiphenylmethyl)pyrrolidine, chiral secondary alcohols were obtained from prochiral ketones with good to excellent enantiomeric excesses (up to 98% ee).     

A p‐Quinodimethane‐Bridged Porphyrin Dimer

A p‐quinodimethane (p‐QDM)‐bridged porphyrin dimer 1 has been prepared for the first time. An unexpected Michael addition reaction took place when we attempted to synthesize compound 1 by reaction of the cross‐conjugated keto‐linked porphyrin dimers 8 a and 8 b with alkynyl/aryl Grignard reagents. Alternatively, compound 1 could be successfully prepared by intramolecular Friedel–Crafts alkylation of the diol‐linked porphyrin dimer 14 with concomitant oxidation in air. Compound 1 shows intense one‐photon absorption (OPA, λ_max=955 nm, ε=45400 M ^?1 cm^?1) and a large two‐photon absorption (TPA) cross‐section (σ⁽²⁾_max=2080 GM at 1800 nm) in the near‐infrared (NIR) region due to its extended π‐conjugation and quinoidal character. It also exhibits a short singlet excited‐state lifetime of 25 ps. The cyclic voltammogram of 1 displays multiple redox waves with a small electrochemical energy gap of 0.86 eV. The ground‐state geometry, electronic structure, and optical properties of 1 have been further studied by density functional theory (DFT) calculations and compared with those of the keto‐linked dimer 8 b . This research has revealed that incorporation of a p‐QDM unit into the porphyrin framework had a significant impact on its optical and electronic properties, leading to a novel NIR OPA and TPA chromophore.     

Ruthenium‐Catalyzed Transfer‐Hydrogenative Cyclization of 1,6‐Diynes with Hantzsch 1,4‐Dihydropyridine as a H2 Surrogate

The transfer‐hydrogenative cyclization of 1,6‐diynes with Hantzsch 1,4‐dihydropyridine as a H₂ surrogate was performed in the presence of a cationic ruthenium catalyst of the type [Cp′Ru(MeCN)₃PF₆]. Exocyclic 1,3‐dienes or their 1,4‐hydrogenation products, cycloalkenes, were selectively obtained, depending on the substrate structure and the reaction conditions.