Investigation of the drying conditions for amidosulfuric acid.

The drying conditions for primary standards of volumetric analysis have a significant effect on the titration results due to changes in the purity, stability and homogeneity. Amidosulfuric acid, a strong acid used as a reference material for volumetric analysis in Japan, was dried in a vacuum desiccator or heated at different temperatures, and then measured by Karl-Fischer titration, thermogravimetry/mass spectroscopy (TG-MS), ion chromatography and coulometric titration. The optimum drying conditions were at 50 degrees C for 24 h with crushing.     

Selective and simultaneous determination of phosphate and silicate ions in leaching process waters for ceramics glaze raw materials of narutal origin by ion-exclusion chromatography coupled with UV-detection after postcolumn derivatization.

The selective and simultaneous ion-exclusion chromatography (IEC) with UV-detection on a weakly acidic cation-exchange resin column in the H+ -form (TSKgel Super IC-A/C) was developed and applied for the simultaneous determination of phosphate and silicate ions as the water quality parameters required for optimizing the water-leaching process for ceramics glaze raw materials of natural origin including feldspar, woods-ash, and straw-ash. Phosphate and silicate ions in these water-leaching process water samples were separated selectively from the coexisting anions such as sulfate, chloride, nitrate and carbonate ions, based on the ion-exclusion separation mechanism. They were detected selectively and simultaneously by a postcolumn derivatization with molybdenum-yellow using the UV-detector. Under the optimized separation and detection conditions (eluent, 0-1 mM sulfuric acid; reactant, 10 mM sodium molybdate-25 mM sulfuric acid; detector, UV at 370 nm; temperature, 45 degrees C), the linearity of calibration was in the range 0.1 - 10 ppm for both phosphate and silicate ions, and the detection limits at S/N = 3 were 2.58 ppb for silicate ions and 4.75 ppb for phosphate ions. The effectiveness of this method was demonstrated in practical applications to the water-leaching process for some ceramics glaze raw materials.     

Separation of fulvic acid from soil extracts based on ion-pair formation with a cationic surfactant.

A novel method for separating fulvic acid (FA) from soil extracts is proposed. The FA, defined as the acid-soluble fraction of an alkaline extract of soil, was separated based on the precipitation of an ion-pair with a cationic surfactant, such as domiphen bromide. The precipitate was dissolved in aqueous HCl to produce H+ -type FA and a surfactant chloride (SUR-Cl). SUR-Cl, in the aqueous solution, was removed by extraction with CHCl3. After the aqueous phase was passed through a cation-exchanger (H+ -type), H+ -type FA (FA-SUR) was obtained as a powder by lyophylization. The chemical characteristics of FA-SUR were compared with an FA sample separated according to the method of the International Humic Substances Society using a DAX-8 resin (FA-DAX). The oxygen content, O/C atomic ratio and total acidity of the FA-SUR were significantly larger than the corresponding values for FA-DAX. The solid-state CPMS 13C NMR spectra indicated that the higher oxygen content of the FA-SUR could be due to alcoholic hydroxyl groups and polysaccharides as well as carboxylic groups. These results show that FA-SUR is more polar and hydrophilic than FA-DAX.     

4-Amino-imidazole durchThorpe-Cyclisierung

The alkylation of arylaminomethylenecyanamides1 or cyano-imidothiocarbamates2 with -halogen carbonyl compounds followed by base catalysed cyclization yields substituted 4-amino-imidazoles4. Imidazo[4,5-d]pyrimidones5, 6 and imidazo[4,5-b]pyridines7 can be obtained from4.     

The electrocapillarity of polyacrylates

Summary The electrocapillary properties of polyacrylic acid have been studied by two methods. Exploratory measurements have been made of the effect of the polymer on the differential capacity of a mercury drop in 0.1 m sodium perchlorate. They showed that the polymer was strongly adsorbed over a wide range of potentials but that it did not appear to form a monolayer. The surface excess of polymer obtained from drop weight data showed a maximum at very low concentrations and then a decline at higher concentrations. The bulk of the work was carried out by making surface tension measurements, using a sessile mercury drop, in solutions of a fraction of polyacrylic acid (mol. wt. 7.02×10⁴) in potassium chloride at 0.01, 0.1, 0.2, and 0.5 m at 25°C.The data have been used to evaluate the surface excesses of the polymer and of the inorganic ions. The distribution of K⁺ and Cl^– in the electrical double layer and the contact adsorption of Cl^– on the mercury were very little affected by the presence of the polymer. The surface excess of polymer was always found to be greatest at low concentrations, to decrease steeply at first as the concentration was increased and then to decrease more slowly at higher concentrations.Possible explanations of this behaviour are discussed and it is concluded that the rapid decrease is a consequence of molecular weight dispersion and the stronger adsorption of high molecular weight polymer. The slow decrease in surface excess at higher concentrations may be a result of configurational changes of the polymer molecules.Surface pressure data show that, despite this decrease in the surface excess, the surface coverage reaches a high level at very low polymer concentrations and then continues to increase slowly as the concentration of polymer is increased. This apparent contradiction is due to changes in configuration of the adsorbed polymer molecules. At higher bulk concentrations the chain configurations are more compact and each adsorbed molecule makes more contacts with and so occupies a greater area of the mercury surface than at low concentrations.The conclusion is reached that the surface excess of polymer is mostly contained in a layer probably more than 1000 Å thick. It consists of a concentrated and entangled mass of polymer chains. Relatively few of these chains are in contact with the mercury at any istant. The concentration in this surface layer decreases steadily with increasing distance from the mercury surface and it merges without discontinuity into the bulk solution.With 10 figures in 22 details     

Studies on the syntheses of heterocyclic compounds. CLXXIV. An approach to the synthesis of oxyacanthine and berbamine

Schotten-Baumann reaction of the amine (X) with 4-benzyloxy-3,4′-oxydiphenylacetyl chloride (XI) gave two amides, (XIIa) and (XIIb), which were cyclized to give the corresponding 3,4-dihydroisoquinolines, respectively. Methylation of the above 3,4-dihydro-isoquinolines, followed by hydrolysis, afforded the compounds having the same composition as berbamine (Ia) and oxyacanthine (Ib), whose structures are under examination.     

Stereochemie von Metallocenen, 40. Mitt.

Starting from optically active methylferrocene-- and--carboxylic acids (1 a and1 b) of known absolute configuration and enantiomeric purity about 15 chiral ferrocenes (of each isomeric series— and ) were obtained by suitable ligand transformations. Thereby (almost) all possible chiral combinations of the ligands CH₃, COOH (COO^–), COOCH₃, CN and NH₂ (NH₃ ⁺) were accessible which are necessary for a potential test of approximations of chirality functions for compounds with basic symmetry C_5v. The chiroptical properties of these disubstituted ferrocenes are recorded.Preliminary tests using a shortened Ansatz revealed large discrepancies between calculated () and found [M]_D-values. Possible reasons for this failure are discussed.

---

---

61. Mitt. über Ferrocenderivate

---

39. Mitt.:A. Meyer, H. Neudeck undK. Schlögl, Chem. Ber.110, 1403 (1977).

---

60. Mitt.:V. Rapi, K. Schlögl undB. Steinitz, J. Organometal. Chem.94, 87 (1975).     

Neue Wege der Analytik durch Kombination der direkten quantitativen Dünnschicht-Chromatographie mit elektronischer Datenverarbeitung

A computer program for direct evaluation of thin-layer chromatograms, which already was described earlier [3] has been tested with a laboratory and some technical formulations of a pesticide. Results have been compared with those obtained by two conventional methods. Mean relative standard deviation calculated from results compiled by electronic data processing (method A) is about 6%, compared to 10% received by graphic method (method C) which is employed by most investigators. In addition, overall time of analysis is 34% higher if graphic method is used. Method A saves time and expense especially in routine analysis because working of the process is easier and may be performed even by assistent personal. The proposed method is suitable for the determination of different active ingredients and impurities even in difficult technical products.     

Dielectric behavior of polyethyleneoxide (polyox)

Ohne Zusammenfassung