Microscopic Elucidation of Solid‐Electrolyte Interphase (SEI) Film Formation via Atomistic Reaction Simulations: Importance of Functional Groups of Electrolyte and Intact Additive Molecules

Secondary batteries such as Li‐ion battery are expected to be utilized as not only ubiquitous electric power sources such as mobile phones but also large‐scale electricity storage devices. Therefore, it is urgent to develop the higher performance secondary batteries. Their lifetime and stability are found to be strongly dependent on the nature of passivation film called solid electrolyte interphase (SEI) film formed on the anode surface in the initial charge‐discharge cycle. However, since it is difficult to directly observe the film formation processes in experiment, its microscopic mechanism is still not found. On the other hand, although the theoretical methods are useful complement to the experiment, some new methodologies are necessary to understand the long‐term processes of SEI film, which is produced as a result of that a lot of chemical reactions proceed simultaneously. Under the circumstances, we have developed Red Moon method that can simulate such complex chemical reaction systems, and were able to analyze for the first time the SEI film formation processes on the anode surface at the atomistic level. Then, we clarified theoretically the microscopic mechanism of the additive effect which is essential to improve the Na‐ion battery performance so as to enhance the SEI film formation. This new microscopic insight must provide an important guiding principle for use in designing the most suitable electrolytes for developing high‐performance secondary batteries.     

Visible-light photocatalysis of ZnO deposited on nanoporous Au

ZnO deposited on nanoporous Au showed photocatalytic decomposition toward methyl orange under visible light, unlike ZnO sputtered on flat Au without a nanoporous structure. First-principles calculations suggested that the surface lattice disorder in nanoporous Au induced a band gap narrowing and a large built-in electric field in the adjacent ZnO, resulting in the visible-light photocatalytic response.     

Investigation of Mizoroki‐Heck coupling polymerization as a catalyst‐transfer condensation polymerization for synthesis of poly(p‐phenylenevinylene)

Mizoroki‐Heck coupling polymerization of 1,4‐bis[(2‐ethylhexyl)oxy]‐2‐iodo‐5‐vinylbenzene ( 1 ) and its bromo counterpart 2 with a Pd initiator for the synthesis of poly(phenylenevinylene) (PPV) was investigated to see whether the polymerization proceeds in a chain‐growth polymerization manner. The polymerization of 1 with ^tBu₃PPd(Tolyl)Br ( 10 ) proceeded even at room temperature when 5.5 equiv of Cy₂NMe (Cy = cyclohexyl) was used as a base, but the molecular weight distribution of PPV was broad. The polymerization of 2 hardly proceeded at room temperature under the same conditions. In the polymerization of 1 , PPV with H at one end and I at the other was formed until the middle stage, and the polymer end groups were converted into tolyl and H in the final stage. The number‐average molecular weight (M_n) did not increase until about 90% monomer conversion and then sharply increased after that, indicating conventional step‐growth polymerization. The occurrence of step‐growth polymerization, not catalyst‐transfer chain‐growth polymerization, may be interpreted in terms of low coordination ability of H‐Pd(II)‐X(^tBu₃P) (X = Br or I), formed in the catalytic cycle of the Mizoroki‐Heck coupling reaction, to π‐electrons of the PPV backbone; reductive elimination of H‐X from this Pd species with base would take place after diffusion into the reaction mixture. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 543–551     

Formation of an Azaruthenacyclopentadiene Skeleton via Ammonia Activation by an Electron-Deficient Ru3 Cluster

A dicationic triruthenium complex containing a μ₃-η³-C₃ ring, [(Cp*Ru)₃(μ₃-η³-C₃MeH₂−)(μ₃-CH)(μ-H)]²⁺ ( 1 a , Cp*=η⁵-C₅Me₅), reacted with ammonia to yield a μ-amido complex, [(Cp*Ru)₃(μ₃-η³-CHCMeCH) (μ₃-CH)(μ-NH₂)]²⁺ ( 5 ), via N−H bond scission. Subsequent treatment with base resulted in C−N bond formation to yield a μ₃-η²:η²-1-azabutadien-4-yl complex, [(Cp*Ru)₃(μ₃-CH)(μ₃-η²:η²-NH=CH−CMe=CH−)]⁺ ( 6 a ). The azaruthenacyclopentadiene skeleton was alternatively synthesized by the photolysis of mono-cationic complex [(Cp*Ru)₃(μ₃-η³-C₃RH₂−)(μ₃-CH)]⁺ ( 2 a ; R=Me, 2 b ; R=H) in the presence of ammonia. The C₃ ring skeleton was broken via the electron transfer to the π*(C−C) orbital in the C₃ ring, and a transiently generated unsaturated μ₃-allylic species can take up ammonia, resulting in N−H bond scission followed by C−N bond formation.     

A mass spectrometric study of the decomposition of trymethylarsine (TMAs) with triethylgallium (TEGa)

The decomposition mechanisms of trimethylarsine (TMAs) with triethylgallium (TEGa) were studied using a sampling gas method with a mass spectrometer. When TEGa is present, the TMAs concentration starts to decrease at temperatures about 100°C lower than for TMAs alone. The TMAs concentration in the gas phase decreases simultaneously with TEGa decomposition. The rate constant of the TMAs concentration decrease is strongly affected by the TMAs/TEGa mole ratio. However, the TEGa decomposition rate is not affected by the TMAs/TEGa mole ratio. The TMAs concentration decrease is mostly due to the decomposition of the adduct between TMAs and TEGa. TMAs in the gas phase starts to decompose and generate methane at 400°C. However, some TMAs molecules probably adsorb on the reactor surface and/or are incorporated into the GaAs crystal as carbon. Between 340 and 450°C, the concentration of carbon in the TMAs adsorbed on the surface as TMAs and/or incorporated into GaAs as carbon atom is stable and keeps a constant concentration: the TMAs generates no methane.     

Morphological fluctuations in discharge-produced μc-Si:H studied by small angle X-ray scattering

Structural inhomogeneities of μc-Si:H in the range 20≈500 A are observed for the first time by small angle X-ray scattering. Inhomogeneous distributions of bonded hydrogen in the amorphous tissue are suggested to be a possible origin of the SAXS yield. Such inhomogeneities can be reduced when the average grain size and volume fraction of microcrystallites are simultaneously increased.     

Synthesis of ethyl 5-cyano-6-hydroxy-2-methyl-4-(1-naphthyl)-nicotinate

A novel ethyl 5-cyano-6-hydroxy-2-methyl-4-(1-naphthyl)-nicotinate is successfully synthesized and the structure is determined by XRD, GC-MS analysis, element analysis and NMR spectroscopic in detail. A reaction mechanism for the reaction is proposed.     

Synthesis and DNA‐binding properties of 1,10‐phenanthroline analogues as intercalating‐crosslinkers

We synthesized a series of bis(bromomethyl)‐1,10‐phenanthrolines as novel anticancer lead compounds and examined their DNA‐binding properties. 5,6‐Bis(bromomethyl)‐1,10‐phenanthroline showed DNA intercalating activity and DNA crosslinking activity, furthermore it is stable in aqueous solution.     

Preparation of apatite-type-silicate-supported precious metal catalysts for selective catalytic reduction of NOx

Apatite-type silicate supported precious metal catalysts were prepared and investigated for their catalytic activity in selective catalytic NO reduction. Single-phase La_9.33Si₆O₂₆ and La_8.33ASi₆O_25.5 (A=Ca, Sr, Ba) were obtained by a sol-gel method. Pd/La_9.33Si₆O₂₆ catalyst exhibited high activity for oxidation of C₃H₆, comparable to Pd/Al₂O₃ catalyst, although the specific surface area of La_9.33Si₆O₂₆ was lower than that of Al₂O₃. In addition, Pt/La_9.33Si₆O₂₆ catalyst exhibited higher activity for selective catalytic reduction of NO than Pt/Al₂O₃ catalyst. Substitution of Ba²⁺ for La³⁺ of La_9.33Si₆O₂₆ led to increased catalytic activity at low temperature.     

Enantioselective C--C bond formation to sulfonylimines through use of the 2-pyridinesulfonyl group as a novel stereocontroller

Enantioselective C--C bond formation to 2-pyridinesulfonylimines afforded products with good enantioselectivity. Dynamic induction of chirality on the sulfur by coordination of a chiral Lewis acid to the pyridine nitrogen and one of the prochiral sulfonyl oxygens induces enantioselectivity. Since the 2-pyridinesulfonyl group can easily be removed after the reaction, it acts not only as an activating group but also as an efficient stereocontroller.