Synthesis of directly linked zinc(II) porphyrin-imide dyads and energy gap dependence of intramolecular electron transfer reactions

A series of zinc(II) porphyrin-imide dyads (ZP-Im), in which an electron donating ZP moiety is directly connected to an electron accepting imide moiety in the meso position, have been prepared for the examination of energy gap dependence of intramolecular electron transfer reactions with large electronic coupling. The nearly perpendicular conformation of the imide moiety towards the porphyrin plane has been revealed by Xray crystal structures. The energy gap for charge separation, 1ZP* - Im --> ZP+ - Im-, is varied by changing the electron accepting imide moiety to cover a range of about 0.8 eV in DMF. Definitive evidence for electron transfer has been obtained in three solvents (toluene, THF, and DMF) through picosecond-femtosecond transient absorption studies, which have allowed us to determine the rates of photoinduced charge separation, 1ZP* - Im --> ZP+ - Im-, and subsequent thermal charge recombination ZP+ - Im- --> ZP - Im. The free-energy gap dependence (energy gap law) has been probed from the normal to the nearly top region for the charge separation rate alone, and only the inverted region for the charge recombination rate. Although both of the energy gap dependencies can be approximately reproduced by means of the simplified semiclassical equation, when we take into consideration the effect of the high frequency vibrations replaced by one mode of averaged frequency, many features, including the effects of solvent polarity and the electron tunneling matrix element on the energy gap law, differ considerably from those of the previously studied porphyrin-quinone systems, which have weaker interchromophore electronic interactions.     

Crystal Structure and Property of Perovskite-Type Oxides Containing Ion Vacancy

Studies on the role of oxygen vacancy in structural change of nonstoichiometric perovskites and a property of oxygen-deficient perovskite-related K₂NiF₄ compounds are reviewed.The structural changes on which the authors focused are cation ordering and lattice distortion. The relationship between the distortion and oxygen vacancy was investigated by comparing the structures of Sr₂(Sr_1-xM_x)TaO_6-d (M = Ca²⁺ and Nd³⁺) solid solutions. It was found that distortion of a perovskite-type lattice decreased with an increasing amount of oxygen vacancies. In order to investigate the relationship between the cation ordering on octahedral sites and oxygen vacancy, structures of stoichiometric Sr_2-xLa_xCo_1-yTa_1+yO₆ and oxygen-deficient Sr_2-xLa_xMg_1-yTa_1+yO_6-d solid solutions were compared. The authors' work reveals that the cation ordering affects the amount of oxygen vacancies in addition to cation charge and size.     

Preparation of polymethyl methacrylate with well-controlled stereoregularity by anionic polymerization in an ionic liquid solvent

This study investigates the effect of ionic liquids (ILs) on the anionic polymerization of methyl methacrylate (MMA). Polymethyl methacrylate (PMMA), an isotactic polymer, is prepared by anionic polymerization at a high reaction temperature with an IL that acts as both solvent and additive. The most plausible reaction mechanism is determined using ¹H NMR and Fourier-transform infrared spectroscopy. The electrostatic interaction between MMA and the IL increases the apparent steric hindrance in MMA, resulting in the isotactic PMMA.     

Detection of multiple anions by thin-layer chromatography

A novel detection method for 21 different anions by thin-layer chromatography is presented. Anions on the target plate form salts with amine in a developing solvent and are visualized after staining with citric acid-acetic anhydride reagent as white spots contrasting against a pale red-pink background. This method has particularly high sensitivity for anions of chlorate, sulfate, phosphate, chromate and dichromate (0.02-0.05 microg). The method is demonstrated to efficiently detect toxic arsenite in curry sauce as an example application. The proposed method offers highly efficient indirect detection for a wide range of anions, and serves as a purification procedure for the preparation of anionic sample solutions for other analytical methods.     

Coprecipitation with metal hydroxides for the determination of beryllium in seawater by graphite furnace atomic absorption spectrometry

Coprecipitation first with magnesium hydroxide, next with tin(IV) hydroxide is developed for the determination of traces of beryllium in sea-water. To a 200-ml sample is added a sodium hydroxide solution to form magnesium hydroxide at pH 11.5, on which beryllium is quantitatively coprecipitated. The precipitate is separated by centrifugation and dissolved in 2 ml of 12 mol/l hydrochloric acid. The resulting solution (ca. 10 ml) is mixed with 2 mg of tin (IV) carrier and the pH is adjusted to 5.0 to collect the beryllium on tin (IV) hydroxide, leaving magnesium ions in the solution. The tin (IV) hydroxide is centrifuged, dissolved in 0.1 ml of 5 mol/l hydrobromic acid, and then diluted to 1 ml with water. Magnesium is so added as to be 500 g/ml for increasing the sensitivity about four times, and the beryllium in the solution is determined by graphite furnace atomic absorption spectrometry. The experiments with synthetic seawater samples showed that pg — g amounts of beryllium can be coprecipitated on the metal hydroxides and beryllium at the low ng/1 level can be determined with reasonable precision (RSD < 10%). The detection limit of the proposed method is 0.5 ng/l of beryllium in seawater.     

Incipient structural and vibrational relaxation process of photolyzed carbonmonoxy myoglobin: statistical analysis by perturbation ensemble molecular dynamics method

The incipient structural and vibrational energy relaxation process of photolyzed carbonmonoxy myoglobin was analyzed by the perturbation ensemble molecular dynamics (PEMD) method, in which many pairs of perturbed and unperturbed MD simulations are executed for ensemble-averaging to obtain statistically significant results by canceling out thermal fluctuations. First, we have shown that the experimentally reported anisotropic expansion can be detected within a picosecond after photolysis. The good agreement between the experimental and computational results indicates that the PEMD method can predict legitimately those changes driven by perturbations even if the changes might be subtle and smaller than thermal fluctuations. Second, the structural relaxation including the ??clamshell rotation?? in E and F helices was successfully analyzed. The high time resolution analysis has clarified the incipient structural dynamics on a subpicosecond timescale: the clamshell rotation starts at His64, Val68, and His93 following both the heme doming and the dissociated CO ligand collision. Third, the vibrational energy relaxation from the heme to the globin matrix is elucidated not only temporally but also spatially. This is the first ??thorough?? report of the spacetime-resolved excess kinetic energy redistribution of photolyzed MbCO in the globin matrix with a statistically significant precision, ±1?K. The incipient anisotropic vibrational relaxation occurs clearly within a picosecond in the direction perpendicular to the heme plane by the ??through-bond?? and ??through-projectile?? pathways, and the isotropic relaxation then follows by the ??through-space?? pathway. Finally, it is concluded that the PEMD method is a powerful tool to understand the incipient relaxation process driven by the perturbation.     

Synthesis and DNA‐binding properties of 1,10‐phenanthroline analogues as intercalating‐crosslinkers

We synthesized a series of bis(bromomethyl)‐1,10‐phenanthrolines as novel anticancer lead compounds and examined their DNA‐binding properties. 5,6‐Bis(bromomethyl)‐1,10‐phenanthroline showed DNA intercalating activity and DNA crosslinking activity, furthermore it is stable in aqueous solution.     

Preparation of apatite-type-silicate-supported precious metal catalysts for selective catalytic reduction of NOx

Apatite-type silicate supported precious metal catalysts were prepared and investigated for their catalytic activity in selective catalytic NO reduction. Single-phase La_9.33Si₆O₂₆ and La_8.33ASi₆O_25.5 (A=Ca, Sr, Ba) were obtained by a sol-gel method. Pd/La_9.33Si₆O₂₆ catalyst exhibited high activity for oxidation of C₃H₆, comparable to Pd/Al₂O₃ catalyst, although the specific surface area of La_9.33Si₆O₂₆ was lower than that of Al₂O₃. In addition, Pt/La_9.33Si₆O₂₆ catalyst exhibited higher activity for selective catalytic reduction of NO than Pt/Al₂O₃ catalyst. Substitution of Ba²⁺ for La³⁺ of La_9.33Si₆O₂₆ led to increased catalytic activity at low temperature.     

Effect of co-adsorbed CO and reaction temperature on the dynamics of N2 desorption under steady-state N2O-CO reaction on Rh(110)

We have investigated the effect of co-absorbed CO and reaction temperature on the angular distribution of N(2) desorption by N(2)O decomposition under the steady state of N(2)O-CO reaction on Rh(110). Spatial distributions of desorbing product N(2) emission have been measured at various surface temperatures and CO coverages. The decomposed N(2) collimates at 48°-61° off normal in the parallel plane to [001] and [110] directions, indicating that adsorbed N(2)O just before the decomposition is oriented along the [001] direction. Although the inclined and collimated N(2) desorption is always observed at any steady-state CO coverage and reaction temperature, the shape of the collimated N(2) distribution varied dependent on the co-adsorbed CO coverage. The distribution becomes sharp and shifts toward the surface normal direction with increasing CO coverage. These effects of adsorbed CO on the angular distribution of N(2) are interpreted by the collision of desorbed N(2) with co-adsorbed CO.