Aryne reaction with trifluoromethyl ketones in three modes: C-C bond cleavage, [2+2] cycloaddition and O-arylation

Trifluoromethyl ketones were found to be coupled with arynes in three modes depending upon their substitution patterns, namely C-C bond cleavage, [2+2] cycloaddition and O-arylation.     

Synthesis and isomerization of conjugated oligomers containing azoimidazole unit

The Suzuki (for O1 – O3 ) and Stille (for O4 ) coupling polymerization of 2‐(phenylazo)imidazole bearing the benzyl protecting group at the 1‐position gave conjugated oligomers. The transformation from the neutral imidazole in the conjugated oligomer O2 , consisted of the alternating 2,5‐didecyl‐1,4‐phenylene unit, to the cationic imidazolium salt O2S was performed. Depending on the chemical structure of coupling partners, the absorption maximum of conjugated oligomers showed red shift or blue shift from that of the model compound M with the benzene ring at the 4,5‐positions. The absorption maximum wavelength of the cationic conjugated oligomer O2S showed a blue shift from that of the neutral conjugated oligomer O2 . The trans‐to‐cis photoisomerization of the azoimidazole unit in conjugated oligomers was observed by irradiating the light at 436 nm, and the conversion degree to the cis structure had a rough correlation with the maximum absorption wavelength of materials. The trans‐to‐cis photoisomerization in the film state was sluggish. On the other hand, the cis‐to‐trans thermal isomerization of the azoimidazole unit was confirmed and the absorbance returned to the initial state before the photoisomerization. The trans‐to‐cis photoisomerization of the cationic conjugated oligomer O2S required large energy, and the prolonged light irradiation might decompose the azoimidazole unit. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Supramolecular Sensor for Astringent Procyanidin C1: Fluorescent Artificial Tongue for Wine Components

An artificial tongue that detects astringent components for a comprehensive evaluation of taste has not been established to date. Herein, we first propose fluorescent polythiophene (PT) derivatives ( S1 – S3 ) modified with 3-pyridinium boronic acid as supramolecular chemosensors for wine components including astringent procyanidin C1. After numerous attempts for the synthetic conditions, more than 95 mol % of the PT unit was modified with the pyridinium boronic acid moiety. To evaluate the PT derivatives as chemosensors of the artificial tongue, qualitative and quantitative analyses were performed with four types of wine components (i.e., sweet, sour, bitter, and astringent tastes) in combination with pattern recognition models. Notably, procyanidin C1 in the actual wine sample was successfully detected in a quantitative manner. In other words, we have established an authentic artificial tongue using PT based supramolecular chemosensors.     

Synthesis and two-electron redox behavior of diazuleno[2,1-a:1,2-c]naphthalenes

The Diels-Alder reaction of di-2-azulenylacetylene with tetraphenylcyclopentadienone afforded 7,8,9,10-tetraphenyldiazuleno[2,1-a:1,2-c]naphthalene in one pot via autoxidation of the presumed 1,2-di-2-azulenylbenzene derivative. In contrast, a similar reaction of bis(1-methoxycarbonyl-2-azulenyl)acetylene with tetraphenylcyclopentadienone gave the 1,2-di-2-azulenylbenzene derivative. The following cyclodehydrogenation reaction of the benzene derivative with iron(III) chloride afforded diazuleno[2,1-a:1,2-c]naphthalene 6,11-bismethoxycarbonyl derivative. The redox behavior of these novel diazuleno[2,1-a:1,2-c]naphthalenes was examined by cyclic voltammetry (CV). These compounds exhibited two-step oxidation waves at +0.22 to +0.71 V upon CV, which revealed the formation of a radical cation and dication stabilized by the fused two azulene rings under the electrochemical oxidation conditions. Since the 1,2-di-2-azulenylbenzene derivative was oxidized at higher oxidation potentials (+0.83 and +1.86 V), the fusion of the two azulene rings to naphthalene increased electron-donating properties because of the formation of a closed-shell dicationic structure. Formation of the radical cation was characterized by UV-vis spectroscopy under the electrochemical oxidation conditions, although no evidence was obtained for the presumed dication under the conditions of the UV-vis spectroscopy measurement.     

Circular Dichroism Study of the Inclusion-Dissociation Behavior of Complexes between a Molecular Nanotube and Azobenzene Substituted Linear Polymers

We have investigated the inclusion properties of molecular nanotubes composed ofcrosslinked -cyclodextrin. Induced circular dichroism was used to probe theformation and dissociation of complexes between the nanotubes and azobenzenemodified linear polymers. The polymer was poly(ethylene glycol) (PEG), either withor without a hydrophobic alkyl chain.It was found that the inclusion complex betweenthe nanotubes and polymers formed at room temperature, and that the polymers dissociated from the nanotubes with increasing temperature. Further, the polymer with hydrophobic alkyl chain was bound inside the nanotube more strongly and dissociated more abruptly with increasing temperature than its hydrophilic counterpart as expected theoretically.     

Matrix effect and correction by standard addition in quantitative liquid chromatographic-mass spectrometric analysis of diarrhetic shellfish poisoning toxins

An evaluation of the feasibility of liquid chromatography-mass spectrometry (LC-MS) with atmospheric pressure ionization was made for quantitation of four diarrhetic shellfish poisoning toxins, okadaic acid, dinophysistoxin-1, pectenotoxin-6 and yessotoxin in scallops. When LC-MS was applied to the analysis of scallop extracts, large signal suppressions were observed due to coeluting substances from the column. To compensate for these matrix signal suppressions, the standard addition method was applied. First, the sample was analyzed and then the sample involving the addition of calibration standards is analyzed. Although this method requires two LC-MS runs per analysis, effective correction of quantitative errors was found.     

Temperature dependence of free volume of polyacrylamide gels studied by positron lifetime measurements

Changes of positronium (Ps) cavity radii in polyacrylamide and poly(N-isopropylacrylamide) gels were studied from 120 to 300 K by positron lifetime technique and it has been shown that the Ps cavity radius in the hydrogels changes by three or four stages. Temperature dependence of the Ps cavity radius exhibits variations similar to common polymers around the glass transition temperature. Hydrophilicity of the polymer chains significantly affects the Ps cavity radius just below 273 K. These results suggest an important role of free volume on the state of water in hydrogels.     

Photoreduction of Europium (III) in Sol-Gel Derived Inorganic-Organic Hybrid Materials

Eu²⁺-doped inorganic-organic hybrid materials, which are potentially suitable for a tunable laser in the near ultra violet and blue region, were prepared through the photoreduction of Eu³⁺ ions in the materials under the irradiation of the fourth harmonic wave light (266 nm) of the Nd:YAG laser. The hybrid materials doped with Eu³⁺ ions were prepared from Si(OCH₃)₄, CH₃Si(OCH₃)₃, EuCl₃ and chloropropyltrimethoxysilane (CPTM). After the prehydrolized silica sol was added to the Eu³⁺-containing solution, Eu³⁺-doped transparent inorganic-organic hybrid material was obtained by drying at 50°C. The emission peak around 450–475 nm due to the charge transfer transition (5d-4f) of Eu²⁺ ions increased with the laser irradiation time. Eu³⁺ ions were effectively photoreduced to Eu²⁺ ions in pore-free materials prepared at high CPTM to Eu³⁺ ratios. Eu²⁺ ions were generated by the photodecomposition of the bond between Eu³⁺ and Cl (Cl^– or Cl(CH₂)₃ in CPTM).     

A first photochemical bis-germylation of C60 with digermirane

[reaction: see text]In the photochemical bis-germylation of C60 with 1,1,2,2-tetrakis(2,6-diethylphenyl)-1,2-digermirane (1), a cycloadduct (2) is obtained in high yield for the first time. Spectroscopic analysis and theoretical investigation confirm that 2 (which has C1 symmetry) results from 1,4-cycloaddition. Control experiments and laser flash photolysis experiments suggest that an exciplex intermediate is responsible for the formation of 2. The redox properties of 2 were examined by differential pulse voltammetry.     

On the factors influencing the dispersion of radioiodines

Radioactivities dispersed from 0.1 N sodium hydroxide solutions of 123I, 125I, or 131I were measured, and the factors influencing dispersion of radioiodines were analyzed. The radioiodines dispersed were trapped by glass fiber filters, charcoal filters, and separable paint. The factors influencing the dispersion of radioiodines are discussed in terms of the dispersal rate, which defined as the ratio of total activity of three kinds of traps in a unit time to whole activity. In order to clarify the factors influencing the dispersal rate, we carried out the experiments; on the effect of reducing agent, that of radioactive concentration of radioiodine, that of mixing the 125I solution with 131I, and that of scavenging hydrated electrons and hydroxyl radicals. It could be concluded from experimental results that the principal factors influencing dispersion of radioiodines are the number of atoms of radioiodine per volume and the energy absorbed in solution from radioiodines. In regard to the absorbed energy, we thought that the dispersion of radioiodines is influenced mainly by hydrated electron, not markedly by hydroxyl radical.