Czochralski-growth of germanium crystals containing high concentrations of oxygen impurities

Oxygen-containing germanium (Ge) single crystals with low density of grown-in dislocations were grown by the Czochralski (CZ) technique from a Ge melt, both with and without a covering by boron oxide (B₂O₃) liquid. Interstitially dissolved oxygen concentrations in the crystals were determined by the absorption peak at 855 cm⁻¹ in the infrared absorption spectra at room temperature. It was found that oxygen concentration in a Ge crystal grown from melt partially or fully covered with B₂O₃ liquid was about 10¹⁶ cm⁻³ and was almost the same as that in a Ge crystal grown without B₂O₃. Oxygen concentration in a Ge crystal was enhanced to be greater than 10¹⁷ cm⁻³ by growing a crystal from a melt fully covered with B₂O₃; with the addition of germanium oxide powder, the maximum oxygen concentration achieved was 5.5×10¹⁷ cm⁻³. The effective segregation coefficients of oxygen in the present Ge crystal growth were roughly estimated to be between 1.0 and 1.4.     

An efficient and scalable synthesis of substituted phenanthrenequinones by intramolecular Friedel-Crafts reaction of imidazolides

An efficient synthesis of 9,10-phenanthrenequinones is described. The two carbonyl groups were introduced by an orthoselective intermolecular Friedel-Crafts reaction of 3-methoxyphenol with ethyl chlorooxoacetate. The formation of a biaryl bond by Suzuki-Miyaura coupling reaction, followed by the hydrolysis of the ester, gave a biaryloxoacetic acid. Treatment of this acid with CDI gave the corresponding imidazolide. The ring closure to the desired phenanthrenequinone was accomplished by intramolecular Friedel-Crafts reaction of the imidazolide promoted by TiCl(4).     

Tripartite single-photon entangled states in noisy quantum channels

A tripartite single-photon state shared through noisy quantum channels is considered for three different system configurations. The quantum teleportation of a single-photon state between two parties is investigated in cases with and without the assistance of a third party. The condition that the quantum teleportation is superior to the classical one is provided in terms of the damping rate and detector efficiency.     

Synthesis and properties of carbamate‐ and amine‐containing poly(phenylacetylenes)

The 3‐ and 4‐aminophenylacetylenes protected by t‐butoxycarbonyl (t‐Boc) and 9‐fluorenylmethoxycarbonyl (Fmoc) groups ( 3a – 6a ) were synthesized and polymerized using [(nbd)RhCl]₂ ( 1 ) and [(nbd)Rh⁺‐η⁶‐PhB^?Ph₃] ( 2 ) catalysts. The t‐Boc‐containing polymers [poly( 3a ) and poly( 4a )] were obtained in high yield (82–91%). Among the Fmoc‐protected monomers, the para‐derivative polymerized well [poly( 6a ); yield = 85–94%], whereas its meta‐substituted analogue did not afford high molecular weight polymer in good yield [poly( 5a ); yield = 10–15%]. The use of KN(SiMe₃)₂ as a cocatalyst in conjunction with 1 led to a dramatic increase in the molecular weight of the polymers. The acid‐ and base‐catalyzed removal of the t‐Boc and the Fmoc groups, respectively, generated primary amine‐containing polymers [poly( 3b )–poly( 6b )] which cannot be obtained directly by the polymerization of the corresponding monomers. The solubility characteristics of the polymers bearing protected amino groups were quite different from those of the unprotected ones, the former being soluble in polar solvents, whereas the latter displayed poor solubility even in polar protic or highly polar aprotic solvents. The attempts to accomplish the free‐standing membrane fabrication by solution casting were successful only for poly( 3a ), and an augmentation in the gas permeability and CO₂/N₂ permselectivity was discerned in comparison with the unsubstituted poly(phenylacetylene) and poly(m‐t‐butyldimethylsiloxyphenylacetylene). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1853–1863, 2009     

Novelty Filtering Using Phase Conjugate Wave in Organic Dye-Doped Polymer Films

A real-time detection of a moving object was demonstrated by taking the subtraction between cross-polarized phase conjugate waves with fast and slow response times with two kinds of dye-doped phase conjugators. One consists of superposed films of an erythrosin-B-doped film and a methyl-orange-doped film, and the other is a film dispersed with both dyes. The relative phase between cross-polarized phase conjugate waves by the both dye-dispersed films was stable.     

Synthesis, structure and inclusion properties of cone-tris{[(5′-methyl-2,2′-bipyridyl)-5-yl]oxycarbonylmethoxy}hexahomotrioxacalix[3]arene

Hexahomotrioxacalix[3]arene having [(5′-methyl-2,2′-bipyridyl)-5-yl]oxycarbonylmethoxy group with cone conformation was prepared, which shows strong Ag⁺ affinity and acts as a ditopic receptor for Ag⁺ and nBuNH₃ ⁺. A conformational change of 2,2′-bipyridyl moiety from the original outward orientation of the ring nitrogen to the inside orientation toward the thiacalixarene cavity was observed in the process of Ag⁺ complexation.     

Alkyl Derivatives of Boehmite Having the Second Stage Structure

Abstract

The reaction of aluminum alkoxide in straight-chain primary alcohols at elevated temperatures yielded the alkyl derivatives of boehmite [AlO(OH)_1-x (OR) _x ], a class of intercalation compound where the guest moieties are covalently bonded to the host boehmite layers. The addition of small amounts of water to the reaction system yielded another phase having a larger basal spacing. XRD, IR, and elemental analysis showed that the products had the boehmite layer structure with the alkyl moieties incorporated between the boehmite layers. IR spectra of the products also exhibited bands due to hydrogen bonding between the boehmite layers. These results suggest that the products are the alkyl derivatives of boehmite having the second stage structure. Because water in the reaction medium facilitated the hydrolysis of intermediate aluminum alkoxides, the product with the second stage structure had smaller alkyl/Al ratio and therefore had smaller basal spacing than that expected from the corresponding first stage product.     

Characteristics of Gain-Guided Laser Diodes with Cylindrical-Mirror Cavity

We have developed highly reliable etched-mirror laser diodes using a dry etching method. The lasers without facet-coating have been operating stably over 2500 h under automatic-power control (APC) at a power of 3 mW/facet at 50°C. The gain-guided laser diodes with a cylindrical-mirror cavity (CMC) have coaxial mirrors and a fan-shaped stripe structure. By decreasing the curvature radius of the inner facet or increasing the stripe width of the inner facet, the beam waist parallel to the junction plane can be moved outside of the laser diode, while the beam waist perpendicular to the junction plane stops at the mirror facet. A particular CMC laser has a low astigmatism of 4.1 μm and a low relative intensity of noise (RIN) less than –134 dB/Hz at 4 mW under 0–1% optical feedback without high frequency current superposition.     

Selective retention of some polyaromatic hydrocarbons by highly crosslinked polymer networks

Highly crosslinked polymer networks were characterized in terms of structural differences based on the crosslinked network structures with their chromatographic molecular retentivity for some polyaromatic hydrocarbons (PAHs). Because PAHs and some sterically bulky solutes were used in the chromatographic characterization, tiny differences in the crosslinked polymer networks were observed in terms of the chromatographic molecular retentivity. Ethylene dimethacrylate afforded molecular retentivity for anthracene, and this recognition ability changed with the polymerization time. In addition, 1,4‐butanediol dimethacrylate afforded molecular retentivity for pyrene, and this retentivity was larger than that for anthracene. The polymerization methods also affected the resulting polymer networks drastically. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2556–2566, 2005