Drying dissipative patterns of colloidal crystals of silica spheres in organic solvents

Drying dissipative structural patterns formed in the course of drying colloidal crystals of silica spheres (110 nm in diameter) in water, methyl alcohol, ethyl alcohol, 1-propyl alcohol, diethyl ether, and in the mixtures of ethyl alcohol with the other solvents above have been studied on a cover glass. The macroscopic broad rings were formed in the outside edges of the dried film for all the solvents examined. Furthermore, much distinct broad rings appeared in the inner area when the solvents were ethyl alcohol, methyl alcohol, and their mixtures. Profiles of the thickness of the dried films were sensitive to the organic solvents and explained well with changes in the surface tensions, boiling points, and viscosities of the solvents. The macroscopic and microscopic spoke-like crack patterns formed. The drying area (or the drying time) increased (or decreased) as the surface tension of the solvent decreased. However, the absolute values of these drying parameters are determined also by the boiling points of the solvents. Importance of the fundamental properties of the solvents is supported in addition to the characteristics of colloidal particles in the drying dissipative pattern formation.     

Production of micron-sized monodispersed composite polymer particles by seeded polymerization utilizing the dynamic swelling method

 In order to develop the seeded polymerization technique utilizing the dynamic swelling method (DSM) proposed by authors for the production of micron-sized mono-dispersed “composite” polymer particles consisting of two kinds of polymers, the seeded polymerization for the dispersion of ethyl methacry-late (EMA)-swollen PS particles prepared utilizing DSM was carried out. Monodispersed PS/poly(ethyl methacrylate) (PEMA) composite particles having 7 μm in diameter were produced by the addition of NaCl to lower the solubility of EMA in medium and by the addition of CuCl₂ as a water-soluble inhibitor to depress the by-production of submicron-sized PEMA particles. Received: 16 July 1996 Accepted: 10 October 1996     

Synthesis of temperature-sensitive micron-sized monodispersed composite polymer particles and its application as a carrier for biomolecules

 Temperature-sensitive micron-sized monodispersed composite polymer particles were prepared by seeded copolymerization of dimethylaminoethyl methacrylate and ethylene glycol dimethacrylate with 1.77 μm-sized monodispersed polystyrene seed particles. The change in surface property at temperature above and below 35 °C was examined by differential scanning calorimetry, trypsin activity and the adsorption/ desorption behaviors of low molecular weight cationic emulsifier as well as biomolecules. Received: 6 August 1997 Accepted: 16 January 1998     

Observation and analysis of single DNA nano-kinetics by pin-fiber video scope

The nano-kinetic movement of a single DNA molecule was observed and analyzed by a newly developed video-microscope system with an optical fiber, called a pin-fiber video scope. A single lambda-DNA molecule was put in focus using fiber-illumination, and the stretching and shrinking motion was measured. The molecule's kinetics were analyzed by numerical calculations and are discussed. A photocleavage phenomenon of DNA molecules was also visualized by the pin-fiber video scope. The new video-microscope system has the potential to observe and analyze the nano-kinetics of a single molecule.     

Uniaxial alignment of the smallest diamagnetic susceptibility axis using time-dependent magnetic fields

A diamagnetic particle with magnetic susceptibilities chi3 < chi2 = chi1 < 0 was subjected to a rotating magnetic field to obtain an alignment of the chi3 axis (the smallest susceptibility axis) in the direction perpendicular to the plane of the rotating magnetic field. A polymer short fiber, whose fiber axis coincides with the chi3 axis, was suspended in a fluid with the same density, and then a rotating magnetic field generated by a rotation of a pair of permanent magnets was applied. The fiber axis, rotating following the applied field, finally ended up with an alignment perpendicular to the plane of the rotating magnetic field. The experimental data on the time course of the alignment was in good agreement with the numerical calculation based on the equation of rotation.     

Incorporation of CdS Nanoparticles Formed in Reverse Micelles into Mesoporous Silica

The incorporation of CdS nanoparticles, prepared in reverse micellar systems, into thiol-modified mesoporous silica, such as FM41 (functionalized MCM-41) and FM48 (functionalized MCM-48), has been investigated. The nanoparticles were immobilized in the mesopores via the incorporation of water droplets of the reverse micelles. A particle-sieving effect for FM41 having large (L-FM41, 3.8 nm) and medium (M-FM41, 3.6 nm) pore size was observed, in that the incorporation of the CdS nanoparticles was decreased with increasing particle size and with decreasing pore size of the FM41. Chemical vapor deposition treatment employed to narrow the mesopores of the CdS-FM41 enhanced the stability of CdS nanoparticles against heat treatment. The CdS-FM41 composites demonstrated photocatalytic activity for H(2) generation from 2-propanol aqueous solution, the better photocatalytic activity being obtained with the larger pore size for CdS-L-FM41. Copyright 2001 Academic Press.     

Three new quassinoids,ailantinol E,F, and G,from Ailanthus altissima

Three new quassinoids, ailantinol E (1), ailantinol F (2), and ailantinol G (3), and related compounds were isolated from Ailanthus altissima grown in Taiwan. Their structures were elucidated from spectral evidence. Each new quassinoid was evaluated for its antitumor promoting effects against Epstein-Barr virus early antigen activation introduced by 12-O-tetradecanoylphorbol-13-acetate in Raji cells. The new quassinoids were found to show potent activity without showing any cytotoxicity. The screening for inhibitors against nitric oxide donor action was also conducted using the new quassinoids and some standard samples.     

Production of submicron-sized multihollow polymer particles by alkali/cooling method

Submicron-sized styrene-methacrylic acid copolymer particles, which were produced by emulsion copolymerization, were changed to those having multihollow structure by treating stepwise the emulsion as follows. First alkali treatment was carried out at higher temperature than the glass transition temperature and subsequently the emulsion was cooled by keeping it at room temperature. This was named alkali/cooling method. The effects of methacrylic acid content, pH, time and temperature in the alkali treatment on the formation of multihollow structure were clarified.Part CLV of the series Studies on suspension and emulsion     

Preparation and separation of all possible rotamers of a stereochemical analog of meso-tartaric acid: optically inactive and optically active isomers of (R,S)-2,2′-bis(methoxycarbonyl)-6,6′-dimethyl-9,9′-bitriptycyl

All the three possible rotamers of the title compound were separated by chromatography, and unambiguously identified by NMR and X-ray analysis. One of the isomers was optically inactive C_i conformation. The other optical active forms were resolved to give a pair of enantiomers, which were characterized by optical rotation and CD spectra. Thus the optical inactivity of a compound such as meso-tartaric acid that can take C_i conformation in solution, is now ascribed to that the molecule has an optically inactive C_i conformer and equal amounts of optically active conformers, that are enantiomers, in solution.