Carbon-coated Non-magnetic Iron Oxide Particles for the Substrate of Multi-layered Magnetic Recording Media

Non-magnetic particles with finer size (less than 200 nm), higher dispersibility, higher blackness and lower electrical resistance are required to produce better multi-layered magnetic tape media which have non-magnetic substrate using non-magnetic sub-layer materials. A special method to prepare acicular hematite particles, whose cross-sectional diameter is about 150 nm, coated with carbon black using a surface modification agent is reported in this paper. Transmission electron microscopy photographs of carbon-coated hematite particles indicate that all of the carbon black is firmly bound to the surface in a distinct layer. The thickness of carbon-coating layer was about 1 to 2 nm if 15% by weight of carbon black is coated onto the particle surface.Non-magnetic substrates for multi-layered magnetic recording media prepared using the carbon-coated particles exhibit improvements in both light transparency and electrical resistance. A decrease in transparency of about 30% as well as a reduction in the electrical resistance of about 1.5 orders of magnitude relative to conventionally prepared substrates was achieved. The surface smoothness and the viscosity were also improved because the dispersibility of these particles in non-magnetic lacquer became better than that of the physical mixture of uncoated hematite particles and carbon black.     

Helical polyacetylenes carrying 2,2,6,6‐tetramethyl‐1‐piperidinyloxy and 2,2,5,5‐tetramethyl‐1‐pyrrolidinyloxy moieties: Their synthesis,properties, and function

2,2,6,6‐Tetramethyl‐1‐piperidinyloxy (TEMPO)‐ and 2,2,5,5‐tetramethyl‐1‐pyrrolidinyloxy (PROXYL)‐containing (R)‐1‐methylpropargyl TEMPO‐4‐carboxylate ( 1 ), (R)‐1‐methylpropargyl PROXYL‐3‐carboxylate ( 2 ), (rac)‐1‐methylpropargyl PROXYL‐3‐carboxylate ( 3 ), (S)‐1‐propargylcarbamoylethyl TEMPO‐4‐carboxylate ( 4 ), and (S)‐1‐propargyloxycarbonylethyl TEMPO‐4‐carboxylate ( 5 ) (TEMPO, PROXYL) were polymerized to afford novel polymers containing the TEMPO and PROXYL radicals at high densities. Monomers 1–3 and 5 provided polymers with moderate number‐average molecular weights of 8200–140,900 in 49–97% yields in the presence of (nbd)Rh⁺[η⁶‐C₆H₅B^?(C₆H₅)₃], whereas 4 gave no polymer with this catalyst but gave polymers possessing low M_n (3800–7500) in 56–61% yield with [(nbd)RhCl]₂‐Et₃N. Poly( 1 ), poly( 2 ), and poly( 4 ) took a helical structure with predominantly one‐handed screw sense in THF and CHCl₃ as well as in film state. The helical structure of poly( 1 ) and poly( 2 ) was stable upon heating and addition of MeOH, whereas poly( 4 ) was responsive to heat and solvents. All of the free radical‐containing polymers displayed the reversible charge/discharge processes, whose capacities were in a range of 43.2–112 A h/kg. In particular, the capacities of poly( 2 )–poly( 5 )‐based cells reached about 90–100% of the theoretical values regardless of the secondary structure of the polymer, helix and random. Poly( 1 ), poly( 2 ), and poly( 4 ) taking a helical structure exhibited better capacity tolerance towards the increase of current density than nonhelical poly( 3 ) and poly( 5 ) did. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5431–5445, 2007     

Study on Stereochemical Activity of Lone Pair Electrons in Sulfur and Halogen Coordinated Antimony(III) Complexes by 121Sb Mössbauer Spectroscopy

We have measured ¹²¹Sb Mössbauer spectra at 20 K for 52 compounds of antimony(III). An Sb(III) atom with the electron configuration [Kr] 4d ¹⁰5s ² has a lone pair electrons. The stereochemical property of the lone pair has been found to depend very much on the kinds of atoms surrounding the antimony atom and the configurations of the coordinating atoms.     

Observation of Si(1 0 0) surfaces annealed in hydrogen gas ambient by scanning tunneling microscopy

We investigated the cleaning process of Si(1 0 0) surfaces by annealing in H₂ gas ambient following chemical treatments by scanning tunneling microscopy. We observed the monohydride Si structure: Si(1 0 0):2 × 1-H on the surfaces annealed at 1000 °C in 2.5 × 10⁴ Pa H₂ gas ambient without conspicuous contaminants. On the sample annealed for 10 min or longer times, well-defined Si(1 0 0) structures with alternating S_A and S_B steps were observed, whereas the initial roughness still remained on the surfaces annealed for only 5 min.     

Acceleration effect of five‐membered cyclic dithiocarbonate on an epoxy–amine curing system

A bifunctional cyclic five‐membered dithiocarbonate (DTC), having a bisphenol A structure, was found to be an effective accelerator for a epoxy–amine curing system comprised of bisphenol A diglycidyl ether and amine‐terminated polypropylene glycol. The acceleration effect was evaluated by monitoring the time‐dependence of the storage modulus of the reaction mixture with a dynamic mechanical analyzer. The reactions involved in the curing system were investigated in detail by performing a series of model reactions using the corresponding monofunctional monomers. This investigation revealed that (1) DTC reacted with amine rapidly, (2) the reaction afforded the corresponding adduct having a thiourethane and thiol moieties, and (3) the thiol reacted rapidly with epoxide. The thiourethane moiety incorporated into the resulting adduct effectively catalyzed the reaction of epoxide and amine, and this catalysis was the predominant mechanism for the acceleration effect arisen by the addition of DTC. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4606–4611, 2007     

Dry Grinding of Mefenamic Acid Particles for Enhancement of its Water Dissolution Rate

This paper details an investigation into the enhancement of the water dissolution rate of mefenamic acid (MA) by means of a dry grinding treatment. The physico‐chemical properties of the ground MA particles were analyzed by measurements of specific surface area, powder X‐ray diffraction patterns, differential scanning calorimetry thermograms and infrared spectra, and the effects of the change in the physico‐chemical properties (especially, crystalline structure) on the dissolution rate were studied. The polymorphic transition from Form I (original) to II and the change of the molecular structure of MA did not occur in the grinding treatments. However, the specific surface area of the MA particles increased, and the crystallinity decreased (i.e., the amorphization level increased) as the grinding progressed. Hydrogen bonds formed between the carboxyl groups of the opposed asymmetric MA molecules were broken gradually after the grinding limit was attained in the grinding system, resulting in an effective improvement of the initial dissolution rate.     

Photochemistry and photocuring properties of thiol‐substituted α‐aminoalkylphenone as radical photoinitiator

Thiol‐substituted α‐aminoalkylphenone was newly developed as a radical photoinitiator. Introduction of the thiol group drastically improved photosensitivity in an alkaline developable resist formulation composed of a prepolymer and a multifunctional acrylate monomer. The improvement in the photocuring speed was explained by a mechanism based on chain transfer reaction of the thiol group. Time‐resolved electron spin resonance (ESR) spectroscopy indicated that the thiol group attached to the chromophore does not influence the photochemical process to generate primary radicals. The photoinitiation of α‐aminoalkylphenone can be spectrally sensitized by 2,4‐diethylthioxanthone (DETX). However, thiol‐substituted α‐aminoalkylphenone showed smaller spectral sensitization than the corresponding compound without a thiol group. Time resolved laser flash photolysis indicated that the rate constant of the quenching of the triplet state of DETX by thiol‐substituted α‐aminoalkylphenone is twice as large as that by the corresponding one without a thiol group. This suggests that, besides energy transfer from DETX in the excited triplet state to the α‐aminoalkylphenone, the thiol group quenches the excited triplet state of DETX via charge transfer and/or hydrogen transfer, as supported by the ESR analysis using a spin trapping technique, and lowers the efficiency of the spectral sensitization effect. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1684–1695, 2005     

In Vivo EPR For Dosimetry

As a result of terrorism, accident, or war, populations potentially can be exposed to doses of ionizing radiation that could cause direct clinical effects within days or weeks. There is a critical need to determine the magnitude of the exposure to individuals so that those with significant risk have appropriate procedures initiated immediately, while those without a significant probability of acute effects can be reassured and removed from the need for further consideration in the medical/emergency system. In many of the plausible scenarios there is an urgent need to make the determination very soon after the event and while the subject is still present. In vivo EPR measurements of radiation-induced changes in the enamel of teeth is a method, perhaps the only such method, which can differentiate among doses sufficiently for classifying individuals into categories for treatment with sufficient accuracy to facilitate decisions on medical treatment. In its current state, the in vivo EPR dosimeter can provide estimates of absorbed dose with an error approximately +/- 50 cGy over the range of interest for acute biological effects of radiation, assuming repeated measurements of the tooth in the mouth of the subject. The time required for acquisition, the lower limit, and the precision are expected to improve, with improvements in the resonator and the algorithm for acquiring and calculating the dose. The magnet system that is currently used, while potentially deployable, is somewhat large and heavy, requiring that it be mounted on a small truck or trailer. Several smaller magnets, including an intraoral magnet are under development, which would extend the ease of use of this technique.     

Partial regularity results for evolutional p-Laplacian systems with natural growth

 We study a regularity for evolutional p-Laplacian systems with natural growth on the gradient. It is shown that weak solutions of small image and their gradients are partial H?lder continuous and the size of the exceptional set for regularity is estimated in terms of Hausdorff measure. The main ingredient is to improve the Gehring inequality, which implies the higher integrability of the gradient and was first developed by Kinnunen and Lewis, so as to be well-worked in our perturbation estimate. We also use a refinement of the perturbation argument and make a device for H?lder estimates of the gradient. Received: 4 March 2002 Mathematics Subject Classification (2000): Primary 35D10, 35B65, 35K65