Effects of post-deposition annealing on chemical composition of SiNx film in SiO2/SiNx/SiO2/Si stacked structure

To systematically evaluate the quality of SiN_x films in multi-stacked structures, we investigated the effects of post-deposition annealing (PDA) on the film properties of SiN_x within the SiO₂/SiN_x/SiO₂/Si stacked structure by performing X-ray photoelectron spectroscopy (XPS), X-ray reflectivity (XRR), Fourier transform infrared (FT-IR) spectroscopy, and scanning transmission electron microscope–electron energy loss spectroscopy (STEM-EELS) analyses. The XPS results showed that PDA induces the oxidation of the SiN_x layer. In particular, new finding is that Si-rich SiN_x in the SiN_x layer is preferentially oxidized by PDA even in multi-stacked structure. The XRR results showed that the SiN_x layer becomes thinner, whereas the interface layer between the SiN_x layer and Si becomes thicker. It is concluded by STEM-EELS and XPS that this interface layer is SiON layer. The density of N–H and Si–H bonding within the stacked structure strongly depends on the PDA temperature. Our study helps elucidate the properties of SiN_x films in stacked structures from various perspectives.     

Synthesis,Aromaticity, and Application of peri-Pentacenopentacene: Localized Representation of Benzenoid Aromatic Compounds

We report the synthesis and optoelectronic properties of TIPS-peri-pentacenopentacene ( TIPS-PPP ), a vertical extension of TIPS-pentacene ( TIPS-PEN ) and a low-band-gap material with remarkable stability. We found the synthetic conditions to avoid the competition between 1,2- and 1,4-addition of lithium acetylide on the large aromatic dione. The high stability of TIPS-PPP is due to the peri-fusion which increases the aromaticity by generating two localized aromatic sextets that are flanked with 2 diene fragments, similar to two fused-anthracenes. Like TIPS-PEN , TIPS-PPP shows the archetypal 2D brickwall motif in crystals with a larger transfer integral and smaller reorganization energy. The high mobility of up to 1 cm² V^?1 s^?1 was obtained in an organic field-effect transistor fabricated by a wet process. Also, TIPS-PPP was used as a near-infrared (NIR) emitter for NIR organic-light-emitting-diode devices resulting in a high external quantum efficiency at 800 nm.     

Complex formation of light and heavy lanthanides with DGA and DOODA,and its application to mutual separation in DGA–DOODA extraction system

We studied the stepwise formation constants (β) of water-soluble diglycolamide (DGA) and dioxaoctanediamide (DOODA) for the mutual separation of Ln in a solvent extraction system. TODGA (N,N,N?,N?-tetraoctyl-diglycolamide) and DOODA(C8) (N,N,N?,N?-tetraoctyl-dioxaoctanediamide) exhibit opposite behaviors in extracting both light and heavy Ln through Ln-patterns. Metal complexes of two- and three-folding with water-soluble DOODA and DGA, respectively, were found, and each β value was calculated using distribution ratios. Taking β, their distribution ratio, D, and separation factor, SF, values into consideration, the suitable separation conditions (aqueous phase: 30 mM DOODA(C2) in 1 M HNO₃; organic phase: 0.1 M TODGA in n-dodecane) of multistage extraction (10?×?10 extraction using aqueous and organic phases, including one sample solution) were determined. In this study, La, Pr, and Nd were mainly present in the aqueous phase, whereas Sm–Dy existed in the organic phase. Although these two groups can be easily separated into two phases, the resolution, Rs, values provide for little mutual separation between La–Nd and Sm–Dy under the present conditions.

     

Bipolar Electrode-based Electrochromic Devices for Analytical Applications – A Review

Bipolar electrode-based (BPE-based) electrochromic devices have garnered increasing attention in the past decade. These BPE-based electrochromic devices have been used for analytical health monitoring, point-of-care (POC) diagnostics, and chemical sensing. In this review, we highlight recent progress made regarding BPE-based electrochromic devices constructed for these analytical applications. Various, available electrochromic materials are summarized in the first section, after which the different device types (e. g., paper-based and self-powered) are discussed. Biological- and chemical-based analytical demonstrations of these devices are then reviewed. Finally, we conclude this review with a perspective on the future developments of BPE-based electrochromic devices in analytical applications.     

Enzymatic Hydrolysis-Responsive Supramolecular Hydrogels Composed of Maltose-Coupled Amphiphilic Ureas

Maltose is a ubiquitous disaccharide produced by the hydrolysis of starch. Amphiphilic ureas bearing hydrophilic maltose moiety were synthesized via the following three steps: I) construction of urea derivatives by the condensation of 4-nitrophenyl isocyanate and alkylamines, II) reduction of the nitro group by hydrogenation, and III) an aminoglycosylation reaction of the amino group and the unprotected maltose. These amphiphilic ureas functioned as low molecular weight hydrogelators, and the mixtures of the amphipathic ureas and water formed supramolecular hydrogels. The gelation ability largely depended on the chain length of the alkyl group of the amphiphilic urea; amphipathic urea having a decyl group had the highest gelation ability (minimum gelation concentration=0.4 mM). The physical properties of the supramolecular hydrogels were evaluated by measuring their thermal stability and dynamic viscoelasticity. These supramolecular hydrogels underwent gel-to-sol phase transition upon the addition of α-glucosidase as a result of the α-glucosidase-catalyzed hydrolysis of the maltose moiety of the amphipathic urea.     

18O/16O-Encoding Strategy for Microscale Stereochemical Determination of Peptidic Natural Products

The demand for more efficient methods of establishing the undetermined stereochemistries of peptidic natural products continues unabated. A new method for microscale stereochemical determination was devised by integrating solid-phase synthesis, split-and-mix randomization, ¹⁸O/¹⁶O-encoding of d /l -configurations, tandem mass spectrometry, and biological evaluation. Here we applied gramicidin A as the molecule for a blind test. Gramicidin A and its 31 diastereomers were randomly prepared in microgram scale with ¹⁸O/¹⁶O-stereochemical encoding and subjected to MS/MS-structural determination and cytotoxicity assay. Only the parent gramicidin A was selected from among the 32 stereoisomers, validating the high reliability of the present strategy.     

Controlling Energy Gaps of π-Conjugated Polymers by Multi-Fluorinated Boron-Fused Azobenzene Acceptors for Highly Efficient Near-Infrared Emission

We demonstrate that multi-fluorinated boron-fused azobenzene (BAz) complexes can work as a strong electron acceptor in electron donor-acceptor (D-A) type π-conjugated polymers. Position-dependent substitution effects were revealed, and the energy level of the lowest unoccupied molecular orbital (LUMO) was critically decreased by fluorination. As a result, the obtained polymers showed near-infrared (NIR) emission (λ_PL=758–847 nm) with high absolute photoluminescence quantum yield (Φ_PL=7–23%) originating from low-lying LUMO energy levels of the BAz moieties (−3.94 to −4.25 eV). Owing to inherent solid-state emissive properties of the BAz units, deeper NIR emission (λ_PL=852980 nm) was detected in film state. Clear solvent effects prove that the NIR emission is from a charge transfer state originating from a strong D-A interaction. The effects of fluorination on the frontier orbitals are well understandable and predictable by theoretical calculation with density functional theory. This study demonstrates the effectiveness of fluorination to the BAz units for producing a strong electron-accepting unit through fine-tuning of energy gaps, which can be the promising strategy for designing NIR absorptive and emissive materials.     

Garcinielliptone G from Garcinia subelliptica Induces Apoptosis in Acute Leukemia Cells

Cytotoxicity and apoptosis-inducing properties of compounds isolated from Garcinia subelliptica leaves were investigated. The hexane-soluble portion of MeOH extracts of G. subelliptica leaves that showed cytotoxic activity was separated to yield seven compounds 1–7. Chemical structure analysis using NMR spectroscopy and mass spectrometry confirmed that compound 1 was canophyllol, and compounds 2–7 were garcinielliptones N, O, J, G, F, and garcinielliptin oxide, respectively. Among them, garcinielliptone G (5) showed growth inhibition by causing apoptosis in THP-1 and Jurkat cells derived from human acute monocytic leukemia and T lymphocyte cells, respectively. Apoptosis induced by garcinielliptone G (5) was demonstrated by the detection of early apoptotic cells with fluorescein-labeled Annexin V and increases in cleaved caspase-3 and cleaved PARP protein levels. However, the addition of caspase inhibitor Z-VAD-FMK did not affect growth arrest or apoptosis induction. These results suggest that garcinielliptone G (5) can induce both caspase-3 activation and caspase-independent apoptosis. Therefore, garcinielliptone G (5) may be a potential candidate for acute leukemia treatment.     

Polymeric saturable-absorber mirror for passive Q-switching of a laser-diode-pumped Nd3+:YVO4 microchip laser

A polymeric multilayered mirror doped with a saturable dye worked as a passive Q-switch of a laser-diode-pumped Nd(3+):YVO4 microchip laser. The multilayered mirror consisted of alternately spin-coated layers of polyvinylcarbazole (PVK) and cellulose acetate on a glass substrate. A dye of bis-(dimethylaminodithiobenzil)-nickel was doped in one of the layers of PVK, providing the repetitively Q-switched pulses. The pulse width and repetition rate were 4 ns and 68 kHz, respectively, for a laser-cavity length of 5 mm, and the average and the peak power were 40 mW and 156 W, respectively, for the highest pump power of 435 mW. The dependence of the Q-switched characteristics on the pump power and on the concentration of the doped dye is described.     

Generation of in-phase pulse train from optical beat signal

We propose and demonstrate generation of an in-phase optical pulse train from an optical beat signal. The proposed method is based on four-wave mixing occurring between the two continuous waves of the beat signal and on spectral filtering to shape the spectrum to be symmetric about the carrier frequency. We perform an experiment to verify the proposed method and obtain a 1.5 ps width in-phase pulse train from a 160 GHz beat signal. Furthermore, we employ a pulse compression scheme to reshape and compress the obtained pulse train, and we show that a 160 GHz repeating, 0.7 ps FWHM, nearly transform-limited, in-phase sech pulse train is successfully generated.