Bicyclo[3.2.1]octane and 6-oxabicyclo[3.2.2]nonane type neolignans from Magnolia denudata

From the ethyl acetate soluble fraction of twigs of Magnolia denudata (Magnoliaceae), seven new neolignan derivatives, 1-7, were isolated along with eighteen known lignan and neolignan derivatives, 8-25. The structures of the new neolignans were elucidated by means of spectral methods, especially by 1H-NMR and 13C-NMR spectra, and two dimensional NMR methods such as 1H-detected heteronuculear multiple bond connectivity1 (HMBC), 1H-detected multiple quantum coherence (HMQC) and 1H-1H-correlation spectroscopy (COSY). Compounds 1-4 have novel structures possessing a 6-oxabicyclo[3.2.2]nonane skeleton and compounds 5-8 also have novel structures possessing a bicyclo[3.2.1]octane skeleton. The anti-platelet-activating factor (PAF) activity of these compounds was tested by measurement of inhibition activity against acetyl transferase to lyso-PAF.     

Silica sol-gel/organic hybrid material for protein encapsulated column of capillary electrochromatography

A new-type of sol-gel/organic hybrid composite material using gelatin or chitosan with tetramethoxysilane was developed for the bovine serum albumin (BSA)-encapsulated monolithic column for capillary electrochromatography (CEC). The composite monolith was used to immobilize BSA in a fused-silica capillary. The addition of gelatin and chitosan to the alkoxysilane enabled the enantioseparation of Trp. A very small amount of these polymers were effective for the enantioseparation. Especially, the monolithic column prepared from chitosan with tetramethoxysilane showed a high enantioselectivity for Trp enantiomers and the value (alpha' = t2/t1, t1: fast eluted enantiomer, t2: second eluted enantiomer) reached 1.15 on CEC mode. Furthermore, the composite materials exhibited a higher stability compared to the silica sol-gel column. These results showed that the sol-gel/organic hybrid composite was useful as a monolithic matrix for the BSA-encapsulated column for CEC.     

Physicochemical properties and stability in the acidic solution of a new macrolide antibiotic, clarithromycin, in comparison with erythromycin.

Clarithromycin (6-O-methylerythromycin), a new 14-membered macrolide antibiotic, has been studied to clarify its physicochemical properties and stability in acidic solution, as compared with erythromycin (EM). The solubility of clarithromycin (CAM) in distilled water was lower than that of EM and decreased with increasing temperature. The solubilities of CAM and EM in the phosphate buffer solution at 37 degrees C decreased with an increasing pH and kept constant above pH 9. From pH-solubility profiles, the dissociation constants of CAM and EM were determined to be 8.76 and 8.36, respectively. The partition coefficient of CAM took a higher value than that of EM and increased with an increasing pH. In the acidic solution, the decomposition of CAM and EM obeyed the pseudo-first order kinetics. From the decomposition rate constants, the half life (T1/2) of CAM and EM were determined. In pH 1.39, CAM degraded with a T1/2 of 17 min while EM kinetics corresponded to a T1/2 of 3 s. Therefore, CAM was 340-fold more stable in pH 1.39 and markedly more stable in the acidic solution than EM.     

Reaction of 2-methoxy-3H-azepine with NBS: efficient synthesis of 2-substituted 2H-azepines

[reaction: see text] The reaction of 2-methoxy-3H-azepines, in the presence or absence of a nucleophile, with N-bromosuccinimide (NBS) gave a regioselective 1,4-adduct from which the corresponding 2H-azepine derivatives were formed via base-promoted hydrogen bromide elimination, generally in moderate to quantitative yield. Competitive formation of 4-bromo-2-methoxy-3H-azepine by electrophilic substitutuion or 3H-azepin-2-yl 2H-azepin-2-yl ether by transetherification was minimized at lower reaction temperatures. Quantitative substitution of 2-(2',4',6'-trichlorophenoxy)-2H-azepine derivatives, formed in moderate yield from the respective 3H-azepine and NBS in the presence of 2,4,6-trichlorophenol (TCP), by various nucleophiles gave the corresponding 2-substituted 2H-azepine. Among these nucleophiles were alkanethiol and alkylamine that are not tolerated in the reaction of 3H-azepine and NBS.     

Hydrogen atom abstraction by methyl radicals in methanol glasses at 15–100 K: evidence for a limiting rate constant below 40 K by quantum-mechanical tunneling

Rate constants for hydrogen atom abstraction by methyl radicals in methanol glasses have been measured from 100 to 15 K. The Arrhenius plot is nonlinear and the reaction rate constant appears to reach a limiting value below 40 K. The results are discussed in terms of simple models for quantum-mechanical tunneling in the solid state at low temperatures. Assuming that the methyl group rotation in methanol brings about a merging of the energy level distribution at the potential barrier, the observation of temperature-independent rate constants below 40 K may be attributable to a freezing out of this rotation such that tunneling occurs only from the zero-point vibrational level.     

Preparation and characterization of individual peptide-wrapped single-walled carbon nanotubes

Two challenges for effectively exploiting the remarkable properties of single-walled carbon nanotubes (SWNTs) are the isolation of intact individual nanotubes from the raw material and the assembly of these isolated SWNTs into useful structures. In this study, we present atomic force microscopy (AFM) evidence that we can isolate individual peptide-wrapped SWNTs, possibly connected end-to-end into long fibrillar structures, using an amphiphilic alpha-helical peptide, termed nano-1. Transmission electron microscopy (TEM) and well-resolved absorption spectral features further corroborate nano-1's ability to debundle SWNTs in aqueous solution. Peptide-assisted assembly of SWNT structures, specifically in the form of Y-, X-, and intraloop junctions, was observed in the AFM and TEM images.     

Efficiency of radiation-induced main-chain scission of poly (methyl methacrylate) depends on the irradiation temperature because of coexisting monomer

Effect of irradiation temperature on the main-chain scission of poly (methyl methacrylate) (PMMA) caused by γ-irradiation was studied by means of gel permeation chromatography and ESR spectroscopy. Although no temperature dependency was observed on the scission efficiency for purified PMMA, the efficiency for crude or monomer-doped purified PMMA was decreased by decreasing the temperature below ca. 200 K. Above 200 K the efficiency was constant and did not depend on the purity of PMMA. ESR study of the irradiated PMMA revealed that the suppression of the scission below 200 K is induced by the addition of methyl methacrylate monomer to primary radical species, which otherwise cause the main-chain scission by warming the polymer above 200 K. The primary radical generated above 200 K immediately converts to the scission-type ? CH₂ ? ?(CH₃) COOCH₃ radical through the β-scission of the polymer main chain, so that the efficiency of the scission does not depend on both the impurity and the irradiation temperature. © 1994 John Wiley & Sons, Inc.     

Epoxyquinol A, a highly functionalized pentaketide dimer with antiangiogenic activity isolated from fungal metabolites

A unique pentaketide dimer structure of a novel fungal metabolite with antiangiogenic activity, designated as epoxyquinol A (1), was determined on the basis of NMR spectral data as well as the X-ray crystallographic analysis. 1 inhibits the endothelial migration induced by vascular endothelial growth factor (ED100 = 3 mug/mL).     

Mechanisms and kinetics of noncatalytic ether reaction in supercritical water. 2. Proton-transferred fragmentation of dimethyl ether to formaldehyde in competition with hydrolysis

Noncatalytic reaction pathways and rates of dimethyl ether (DME) in supercritical water are determined in a tube reactor made of quartz according to liquid- and gas-phase 1H and 13C NMR observations. The reaction is studied at two concentrations (0.1 and 0.5 M) in supercritical water at 400 degrees C and over a water-density range of 0.1-0.6 g/cm3. The supercritical water reaction is compared with the neat one (in the absence of solvent) at 0.1 M and 400 degrees C. DME is found to decompose through (i) the proton-transferred fragmentation to methane and formaldehyde and (ii) the hydrolysis to methanol. Formaldehyde from reaction (i) is consecutively subjected to four types of redox reactions. Two of them proceed even without solvent: (iii) the unimolecular proton-transferred decarbonylation forming hydrogen and carbon monoxide and (iv) the bimolecular self-disproportionation generating methanol and carbon monoxide. When the solvent water is present, two additional paths are open: (v) the bimolecular self-disproportionation of formaldehyde with reactant water, producing methanol and formic acid, and (vi) the bimolecular cross-disproportionation between formaldehyde and formic acid, yielding methanol and carbonic acid. Methanol is produced through the three types of disproportionations (iv)-(vi) as well as the hydrolysis (ii). The presence of solvent water decelerates the proton-transferred fragmentation of DME; the rate constant is reduced by 40% at 0.5 g/cm3. This is caused by the suppression of low-frequency concerted motion corresponding to the reaction coordinate for the simultaneous C-O bond scission and proton transfer from one methyl carbon to the other. In contrast to the proton-transferred fragmentation, the hydrolysis of DME is markedly accelerated by increasing the water density. The latter becomes more important than the former in supercritical water at densities greater than 0.5 g/cm3.     

Facile syntheses of substituted 2,3-dihydrofurans and benzofurans by palladium-catalyzed reactions of propargylic carbonates with nucleophiles

Substituted 2,3-dihydrofurans and benzofurans are synthesized by the palladium-catalyzed reaction of 5-methoxycarbonyloxy-3-pentyn-1-ols and 1-(2-hydroxyphenyl)-3-methoxycarbonyloxy-1-propyne with nucleophiles, respectively. Various substituted propargylic carbonates and nucleophiles are efficiently transformed to their corresponding products. Additionally, a reaction using substrates containing a nucleophilic phenoxy group within the same molecule also produces the corresponding dihydrofuran.