Solid sampling technique for direct detection of condensed tannins in bark by matrix-assisted laser desorption/ionization mass spectrometry

A novel method for the direct analysis of condensed tannin components in bark was developed on the basis of matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) combined with a simple solid sampling technique. The MALDI mass spectra obtained from the wood (bark) powder sample clearly showed a series of peaks corresponding to the sodium ion adducts of condensed tannin oligomers up to around m/z 3000. The results indicate that the condensed tannins in the bark sample used in this work mostly consist of combinations of flavan-3-ol units such as profisetinidin (PF), prorobinetinidin (PR) and prodelphinidin (PD), at least up to 10-mers (m/z approximately 3000).     

Capacitance-conductance detector for high-pressure liquid chromatography. Application to alkaloids and fatty acids

Summary A new type of detector for high-pressure liquid chromatography has been designed. This detector is equipped with a RC resonance circuit, and is similar to the capacitance detector previously reported. It is operated as a capacitance detector with nonpolar eluents; while with polar solvents, it behaves as a conductance detector. Electrolytes such as salts, acids and bases are sensitively detected. The detector was successfully used for the detection of fatty acids and alkaloids.

---

Zusammenfassung Ein neuartiger Detektor für die Hochdruck-Flüssigchromatographie wurde entwickelt. Dieser ist mit einem Resonanzstromkreis ausgestattet und ähnelt dem kürzlich beschriebenen Kapazitanz-Detektor. Als solcher funktioniert er mit nichtpolaren Eluenten, während er sich mit polaren Lösungsmitteln wie ein Leitfähigkeitsdetektor verhält. Salze, Säuren und Basen werden empfindlich nachgewiesen. Das Gerät wurde zum Nachweis von Fettsäuren und Alkaloiden verwendet.

     

Synthesis, stereochemistry, and circular dichroism of optically active o-substituted diphenyl sulphilimines and related compounds

Optically active o-substituted diphenyl N-substituted sulphilimines are readily synthesised by the reaction of the corresponding sulphides and t-butyl hypochlorite in the presence of l-menthol and amide anions. (−)-N-p-Tolylsulphonylsulphilimines (1, 2) obtained were converted to the corresponding (−)-N-unsubstituted sulphilimines (8, 9) by treating them with concentrated sulphuric acid. When (−)-S-o-anisyl S-phenyl N-(unsubstituted) sulphilimine (8) was treated with acylating agents or acrylonitrile, the corresponding optically active (−)-N-substituted sulphilimines were prepared with complete retention at sulphur. The absolute configuration of (−)-S-o-anisyl S-phenyl N-p-tolylsulphonylsulphilimine (1) was determined by converting it to (+)-S-o-anisyl sulphoxide (17). CD curves of (−)-o-substituted diarylsulphilimines exhibited a negative Cotton effect at around 270–285 nm, which was assigned to (S)-configuration at sulphur by comparing with the analogous sulphoxides. The substituent on the imino group of the sulphilimine gave no appreciable effect on the CD behavior and the lack of substituent effect was considered to be due to the semi-polar character of the S(IV)-N bond. Unusual effect of o-methoxy group on the CD curves was discussed in connection with solvent effect. Mechanism of this asymmetric synthesis has been investigated, and it has become apparent that the diastereomeric menthoxysulphonium chloride was an excess of (RR)-configuration was formed initially and the amide anion attacks the S atom of the salt with net inversion.     

Cyclopolycondensations

Fully aromatic polyquinazolinediones of high molecular weight were prepared by the cyclopolycondensation reaction of 4,4′-diamino-3,3′-biphenyldicarboxylic acid with aromatic diisocyanates. The poly(phosphoric acid) solution polymerization techniques yielded tractable poly(urea acid), which was converted to polyquinazolinediones by thermal cyclodehydration at 300–400°C. under reduced pressure. The polyquinazolinediones thus obtained have excellent thermal stability both in nitrogen and in air. The poly(urea acid) is soluble in dimethyl sulfoxide, and films can be cast from the polymer solution of poly(urea acid) (η_inh = 0.8 to 1.8). The films are made tough by being heated in nitrogen or under reduced pressure at 300–400°C. The polymerization mechanism of the cyclopolycondensation reaction was studied, and it was established that the polymerization proceeded through the formation of tractable poly(urea acid), Structure (I), of high molecular weight, followed by cyclodehydration, yielding poly(1,2-dihydro-2-imino-4H-3,1-benzoxazin-4-one), Structure (II). On subsequently being heated this undergoes intramolecular rearrangement along the polymer chain, giving the thermodynamically stable polyquinazolinedione, Structure (III).     

Kinetic resolution of vic-amino alcohols catalyzed by a chiral Cu(II) complex

Kinetic resolution of N-benzoylated vic-amino alcohols was achieved by benzoylation in the presence of copper triflate and (R,R)-Ph-BOX as catalysts. The observed enantioselectivity was moderate to high. The method was applied to a kinetic resolution of racemic prolinol and piperidinemethanol derivatives as well as an asymmetric desymmetrization of 2-amino-1,3-diol derivatives.     

Reactivity and Structural Properties of a Mechanochemically Treated Ag2O-V2O5 System in Relation to AgVO3 Polymorphs

Formation and chemical properties of amorphous AgVO₃, which was prepared by mechanochemical treatment of an Ag₂O-V₂O₅ mixture, and crystalline AgVO₃ were studied in relation to AgVO₃ polymorphs. A ball-milled sample of the mixture was assigned as a highly deformed β-AgVO₃ rather than the low density phase α-AgVO₃. Crystalline α-AgVO₃ and β-AgVO₃ were converted into deformed β-AgVO₃ by ball milling, which produced a clear change. δ-AgVO₃ is resistant to mechanical treatment and its structure was not markedly affected. The dissolved chemical species from the ball-milled sample precipitates to form α-AgVO₃ without a seeding crystal, but other polymorphs deposit if they are present; i.e., β-AgVO₃ and δ-AgVO₃ grow on the seeding crystal.     

Interpretation of structure formation during the sol-gel transition of a resorcinol-formaldehyde solution by population balance

Growth of colloidal particles formed during the sol-gel transition of a resorcinol-formaldehyde (RF) solution was simulated based on the population balance equation by using the discrete-sectional model (DSM). During the early stage of the sol-gel transition, the transient change of sizes of colloidal particles estimated by this method agreed well with the previous experimental observation by dynamic light scattering (DLS), which confirmed the influence of the catalyst concentration of a starting RF solution on the growth rate of the particles. From the size distribution of colloidal particles predicted at the gelation time, the surface area of a RF hydrogel after the completion of the sol-gel transition was estimated, which coincided with the BET surface area of a RF aerogel because the porous structure of a hydrogel was maintained and few micropores were formed during supercritical drying.     

Fluorinated monomer–styrene copolymer latex particles: I. kinetic studies in a soap-free aqueous medium

Soap-free emulsion copolymerization of 2, 2, 2-trifluoroethyl acrylate (3FEA) with styrene was carried out by using potassium persulfate as an initiator, and the effects of the weight fraction of 3FEA in the monomer feed on the kinetics and the particle size were investigated. Monomer conversions were followed by a gravimetric method, revealing that the overall polymerization rate increased exponentially with an increase in the weight fraction of 3FEA. According to dynamic light scattering measurement, the final particle size was found to decrease with an increase in the weight fraction of 3FEA. The number of particles for 3FEA homopolymerization was roughly twice as large as that at the fraction of 0.9, although both fractions had the almost same polymerization rates. These results indicate that soap-free emulsion homopolymerization of 3FEA would proceed not only inside the polymer particles but also in the aqueous phase throughout the polymerization.     

Photoinduced chemical reactions on natural single crystals and synthesized crystallites of mercury(II) sulfide in aqueous solution containing naturally occurring amino acids

Photoirradiation at >300 nm of aqueous suspensions of several natural crystal specimens and synthesized crystallites of mercury(II) sulfide (HgS) induced deaminocyclization of optically active or racemic lysine into pipecolinic acid (PCA) under deaerated conditions. This is the first example, to the best of our knowledge, of photoinduced chemical reactions of natural biological compounds over natural minerals. It was found that the natural HgS crystals had activity higher than those of synthesized ones but lower than those of other sulfides of transition metals, e.g., CdS and ZnS, belonging to the same II-IV chalcogenides. In almost all of the photoreactions, decompostion of HgS occurred to liberate hydrogen sulfide (H(2)S) and Hg(2+), and the latter seemed to have undergone in-situ reductive deposition on HgS as Hg(0) after a certain induction period (24-70 h) during the photoirradiation, as indicated by the darkened color of the suspensions. The formation of PCA, presumably through combination of oxidation of lysine and reduction of an intermediate, cyclic Schiff base, could also be seen after a certain induction time of the Hg(0) formation. This was supported by the fact that the addition of small amount of Hg(2+) (0.5 wt % of HgS) increased the PCA yield by almost 2-fold. We also tried to elucidate certain aspects of the plausible stereochemical reactions in relation to the chiral crystal structure of HgS. Although, in some experiments, slight enantiomeric excess of the product PCA was observed, the excess was below or equal to the experimental error and no other supporting analytical data could not be obtained; we cannot conclude the enantiomeric photoproduction of PCA by the natural chiral HgS specimen.     

Hydrogen Effect on Coke Removal and Catalytic Performance in Pre-Carburization and Methane Dehydro-Aromatization Reaction on Mo/HZSM-5

1. Introduction As an effective utilization of methane, the methane dehydro-aromatization was focused in the last decade [1-28]. Over the Mo/HZSM-5 bi- functional catalyst at high reaction temperature, methane can be converted into light aromatics (ben- zene and naphthalene) and hydrogen. Mo active species can activate the C—H bond of methane; and HZSM-5 supplies the acid sites for the oligomeriza- tion and cyclization of hydrocarbons to form aromat- ics, and suppresses the deeper condens…