(2,7-Disubstituted-1,8-biphenylenedioxy)bis(dimethylaluminum) as bidentate organoaluminum Lewis acids: elucidation and synthetic Utility of the double electrophilic activation phenomenon

A series of (2,7-disubstituted-1,8-biphenylenedioxy)bis(dimethylaluminum) (2) has been readily prepared in situ by treatment of the requisite 2,7-disubstituted-1,8-biphenylenediol (1) with Me3Al (2 equiv) in CH2Cl2 at room temperature; this primarily relies on the successful establishment of a new synthetic procedure of 1 starting from inexpensive m-anisidine. Evaluation of 2 as a bidentate organoaluminum Lewis acid has been performed by the reduction of ketonic substrates using Bu3SnH as a hydride source in comparison to the conventional monodentate Lewis acid dimethylaluminum 2,6-xylenoxide (11), uncovering the significantly high activation ability of 2 toward carbonyl. Particularly, (2,7-dimethyl-1,8-biphenylenedioxy)bis(dimethylaluminum) (2a) exerted the highest reactivity, which has also been emphasized in the Mukaiyama aldol reaction. The structure of the bidentate Lewis acid 2 was unambiguously determined by single-crystal X-ray diffraction analysis of 2g possessing a bulky 3,5-di-tert-butylphenyl substituent, revealing the rigid dimeric assembly in the solid state. The double electrophilic activation of carbonyl substrate by 2a has been supported by low-temperature 13C NMR analysis as well as theoretical study using the Gaussian 98 program. Moreover, unique stereoselectivity has been observed in the 2a-promoted Mukaiyama Michael addition, and highly chemoselective functionalization of carbonyl compounds in the presence of their acetal counterparts has been realized using 2a. Finally, the effectiveness of 2a for the activation of ether functionality has been demonstrated in the Claisen rearrangement of allyl vinyl ethers.     

γ-Ray-induced polymerization of α-haloacrylic acids

The γ-ray induced polymerizations of α-chloroacrylic acid, mp 66°C, and α-bromo-acrylic acid, mp 72°C, were investigated in the temperature range from 35°C to 85°C. An analysis of polymerization kinetics was made, and results were similar to those reported in the literature for other vinyl monomers. On heating of the polymer obtained, elimination of hydrogen halide takes place, and intramolecular lactone formation is observed. The rate of lactone formation of poly(α-chloroacrylic acid) obtained in the solid-state polymerization was found to be higher than that in the liquid state, because a highly isotactic configuration of polymers, tends to be formed in the solid-state polymerization, and elimination of hydrogen chloride is facilitated with an isotactic 5₂ helix structure.     

Convenient synthetic routes to α-oligosiloxanylacrylonitriles

Novel 1,4-elimination reaction of C,N-bis(trimethylsilyl)-C- trimethylsiloxymethylketenimine and retro Diels-Alder reaction of 2-oligosiloxanyl-5-norbornene-2-carbonitrile cleanly gave α-oligosiloxanylacrylonitriles in excellent yield.     

Calculations on the competition between association and reaction for C3H(+) + H2

A potential energy surface has been calculated for the competing associative and reactive ion-molecule processes involving the reactants C3H(+) + H2. Our ab initio results show that the linear ion C3H+ and H2 can directly access the deep potential well of the propargyl ion H2CCCH+, which is calculated to lie 390 kJ mol-1 below the zero-point energy of the reactants. Isomerization between the propargyl ion and the lower energy, cyclic C3H3+ ion, calculated to lie 501 kJ mol-1 below the zero-point energy of reactants, can subsequently occur via two pathways. One of these pathways involves a transition state lying 22 kJ mol-1 below the energy of the reactants while the other, which occurs at much lower energies, involves two transition states and an intermediate. The dissociation of c-C3H3+ into c-C3H2(+) + H is calculated to occur directly, without any intermediate potential energy maximum, but the energy of the products lies 7.3 kJ mol-1 above the energy of the reactants. Using the minimum energy potential pathway and properties of the stationary point structures determined via ab initio methods, we have calculated both the association rate coefficient to produce C3H3+ as a function of density and the branching ratio between the propargyl and cyclic structures of the ion. Our results are in good agreement with some experimental results and in conflict with others. Specifically, we agree with the 1:1 branching ratio measured for the propargyl and cyclic isomers of C3H3+ at 80 and 300 K and we agree with the rate coefficient for radiative association measured at 80 K. We cannot reproduce reported measurements that the reactive channel (C3H2(+) + H) is the dominant channel at 80 K and at low gas densities, or that the association channel at high densities saturates at an effective rate coefficient well below the Langevin value -2x10(-11) cm3 s-1 at 300K and 1x10(-10) cm3 s-1 at 80K.     

Search for a simpler synthetic model system for intramolecular 1,3-dipolar cycloaddition to the 5,6-double bond of a pyrimidine nucleoside

In search for a simpler model system for the study of intramolecular thermal reactions between the base and 5'-functionalized sugar moiety in nucleosides, 1-(3-azidopropyl)uracil (2), 1-(4-azidobutyl) pyrimidines (12 and 13) and 1-(5-azidopentyl)-uracil (14) was synthesized through the corresponding ω-benzoyloxy-(6,7 and 8) and ω-hydroxyalkyl-pyrimidines (9,10 and 11). Heating 2 gave 1,N⁶-trimethylene-6-aminouracil (4), while heating 12 and 13 gave N¹-C₆ cleaved addition products. 15 and 16, respectively. 15 was regiospecifically transformed to 1,2,3-triazole derivatives, 17,18 and 19. Heating 1-(4-azidobutyl)-5-bromouracil (20) yielded 3,9-tetramethylene-8-azaxanthine (22). 9 with NBA gave 1,0⁶-tetramethylene-5-bromo-6-hydroxy-5,6-dihydrouracil (24) and the 5-brominated analog of 9 (25). The 4-functionalized butyl side chain proved to serve as a substitute for the 5'-functionalized sugar moiety in pyrimidine ribonucleosides.     

Theoretical study of molecular conduction: I. Effective Green's function based on perturbation theory

There have been many experimental and theoretical studies on molecular conduction, as it is a fundamental parameter in the study of molecular‐scale electronics. We have investigated the features of molecular conduction using a Green's function method, which has often been used to solve problems in quantum transport and is also effective in elucidating electron transport in molecules. We have obtained the novel effective Green's functions, including the first‐order energy corrections, by accommodating the self‐energy of the electrodes as perturbation terms. Although these approximate Green's functions only provide information on the first‐order energy corrections, they can involve the elementary properties of molecular conduction. We propose a scheme for the analysis of the relations between molecular orbitals and their roles in molecular conduction and present analytical calculations for normal and cyclic polyenes. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

The passivation phenomenon of platinum in fused lithium chloride + potassium chloride eutectic: Part II. Chlorine overpotential and superpassivation of platinum

Platinum is known to have a very high chlorine overpotential, about 0.8 V, in fused lithium chloride + potassium chloride eutectic. The high overpotential can be ascribed to the formation of the thick passivation film of platinum chlorides. The high chlorine overpotential was decreased by the addition of alkali metal oxides and a reversible chlorine evolution was revealed in a similar manner as the graphite electrode. The reversible chlorine evolution was ascribed to the formation of the oxide passivation film. The chlorine overpotential at the oxide film was increased stepwise as the applied potential was made more positive. The stepped transitions of the chlorine overpotential was ascribed to the valence change of the oxide film. Platinum shows a typical N-shaped passivation at +0.65 V versus Ag/AgCl(0.1) which has been ascribed to the dissolution of platinum into Pt(II) ions and following formation of the passivation film of supersaturated Pt(II) chloride. Platinum was found to show another passivation phenomenon at high temperatures, above 450°C. The N-shaped current-potential curve was observed at +1.8 V which was far more positive than the potential of the standard chlorine electrode. The dissolution of platinum prior to the passivation was found to occur due to the formation of high valence platinum ions such as Pt⁶⁺ and Pt⁸⁺.     

NLO‐active maleimide copolymers with ­high glass transition temperatures

We synthesized some novel rigid NLO‐active maleimide copolymers bearing DR‐1 moieties ( PMPD , PHSD and PHND ). All copolymers exhibited high T_g's (190～197 °C), good solubilities for common solvents and excellent film‐forming properties. Dependence of film thickness on the d₃₃ value for the poled copolymer films induced by corona poling was investigated and it was demonstrated that in less than thickness of 0.3 µm decrease of the thickness gives rise to remarkable increase in the d₃₃ value. The poled copolymer films exhibited large d₃₃ values (270 × 10^?9 esu (film thickness 0.13 µm) for PMPD , 290 × 10^?9 esu (0.12 µm) for PHSD and 350 × 10^?9 esu (0.08 µm) for PHND ) as well as large r₃₃ values (51.0 pmV^?1 for PMPD and 60.4 pmV^?1 for PHND ) which are significantly large compared to the value of LiNbO₃ (31 pmV^?1) as a typical EO material. The d₃₃ values of the poled copolymers were kept constant even after standing 1000h at 80 °C, although a small decrease was observed at an initial stage. Further, the d₃₃ values did not change up to ca. 123 °C upon heating at the rate of 10 °C/min in all cases. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of 2-, 4- and 5-(2-alkylcarbamoyl-1-methylvinyl)-7-alkyloxybenzo[b]furans and their leukotriene B4 receptor antagonistic activity

Variable benzo[b]furan derivatives having (E)- and (Z)-2-alkylcarbamoyl-1-methylvinyl groups at the 2-, 4- and 5-positions and a carboxylpropoxy or (1-phenyl)ethoxy group at the 7-position were prepared to find novel and selective leukotriene B4(LTB4) receptor antagonists. (E)-2-(2-diethylcarbamoyl-1-methylvinyl)-7-(1-phenylethoxy)benzo[b]furan (4v) showed selective inhibition to the human BLT2 receptor (hBLT2). On the other hand, (E)-2-acetyl-4-(2-diethylcarbamoyl-1-methylvinyl)-7-(1-phenylethoxy)benzo[b]furan (7v) inhibited both human BLT(1) receptor (hBLT1) and hBLT2. The (E)-2-(2-diethylcarbamoyl-1-methylvinyl) group lay on approximately the same plane as the benzo[b]furan ring, whereas the (E)-4-(2-diethylcarbamoyl-1-methylvinyl) group had the torsion angle (45.7 degree) from the benzo[b]furan ring plane. However, the (Z)-(2-alkylcarbamoyl-1-methylvinyl)benzo[b]furans were inactive. The inhibitory activity depended on the conformation of the 2-diethylcarbamoyl-1-methylvinyl group.