Photoreactive polyamides having m- or 1-type dimer moiety derived from 4-(3-oxo-3-phenyl-1-propenyl)benzoic acid derivatives

Photoreactive polyamides having m- or 1 -type cyclobutane moiety were prepared via a topochemical photodimerization of 4-(3-oxo-3-phenyl-1-propenyl)benzoic derivatives,⁴ followed by polycondensation of cyclobutane dicarboxylate derivatives with diamines. From the spectral studies of resulted polyamides compared with the corresponding reference diamides, it was concluded that both types of polyamides were depolymerized photochemically to give the same type of amide derivative having chalcone moiety with a small amount of undefined side reaction. The cyclobutane ring of the m-dimer from 4-(3-oxo-3-phenyl-1-propenyl)benzoic acid in crystal is severely twisted presumably because of the enhanced steric repulsions between two pairs of adjacent substituents. The higher quantum yield of the m-dimer for the photocleavege, compared with that of the 1 -dimer, has been interpreted in terms of such steric repulsions by the strained structure of the m-dimer.     

Metallic Na formation in/on NaCl crystals with irradiation by electron or vacuum ultraviolet photons

Metallic Na was formed in/on NaCl single crystals by irradiating them with a variety of radiation sources, namely, 21 MeV electron pulses, an electron beam of 30 keV and photon fluxes in the VUV region. The physical states were analysed using several methods, optical absorption, lifetime measurement of positron annihilation, Auger electron spectroscopy and UV photoelectron spectroscopy. Metallic Na was obtained in different physical states; clusters were formed in bulk, thin layers (islands) and thick layers on the surface.     

(2,7-Disubstituted-1,8-biphenylenedioxy)bis(dimethylaluminum) as bidentate organoaluminum Lewis acids: elucidation and synthetic Utility of the double electrophilic activation phenomenon

A series of (2,7-disubstituted-1,8-biphenylenedioxy)bis(dimethylaluminum) (2) has been readily prepared in situ by treatment of the requisite 2,7-disubstituted-1,8-biphenylenediol (1) with Me3Al (2 equiv) in CH2Cl2 at room temperature; this primarily relies on the successful establishment of a new synthetic procedure of 1 starting from inexpensive m-anisidine. Evaluation of 2 as a bidentate organoaluminum Lewis acid has been performed by the reduction of ketonic substrates using Bu3SnH as a hydride source in comparison to the conventional monodentate Lewis acid dimethylaluminum 2,6-xylenoxide (11), uncovering the significantly high activation ability of 2 toward carbonyl. Particularly, (2,7-dimethyl-1,8-biphenylenedioxy)bis(dimethylaluminum) (2a) exerted the highest reactivity, which has also been emphasized in the Mukaiyama aldol reaction. The structure of the bidentate Lewis acid 2 was unambiguously determined by single-crystal X-ray diffraction analysis of 2g possessing a bulky 3,5-di-tert-butylphenyl substituent, revealing the rigid dimeric assembly in the solid state. The double electrophilic activation of carbonyl substrate by 2a has been supported by low-temperature 13C NMR analysis as well as theoretical study using the Gaussian 98 program. Moreover, unique stereoselectivity has been observed in the 2a-promoted Mukaiyama Michael addition, and highly chemoselective functionalization of carbonyl compounds in the presence of their acetal counterparts has been realized using 2a. Finally, the effectiveness of 2a for the activation of ether functionality has been demonstrated in the Claisen rearrangement of allyl vinyl ethers.     

γ-Ray-induced polymerization of α-haloacrylic acids

The γ-ray induced polymerizations of α-chloroacrylic acid, mp 66°C, and α-bromo-acrylic acid, mp 72°C, were investigated in the temperature range from 35°C to 85°C. An analysis of polymerization kinetics was made, and results were similar to those reported in the literature for other vinyl monomers. On heating of the polymer obtained, elimination of hydrogen halide takes place, and intramolecular lactone formation is observed. The rate of lactone formation of poly(α-chloroacrylic acid) obtained in the solid-state polymerization was found to be higher than that in the liquid state, because a highly isotactic configuration of polymers, tends to be formed in the solid-state polymerization, and elimination of hydrogen chloride is facilitated with an isotactic 5₂ helix structure.     

The passivation phenomenon of platinum in fused lithium chloride + potassium chloride eutectic: Part II. Chlorine overpotential and superpassivation of platinum

Platinum is known to have a very high chlorine overpotential, about 0.8 V, in fused lithium chloride + potassium chloride eutectic. The high overpotential can be ascribed to the formation of the thick passivation film of platinum chlorides. The high chlorine overpotential was decreased by the addition of alkali metal oxides and a reversible chlorine evolution was revealed in a similar manner as the graphite electrode. The reversible chlorine evolution was ascribed to the formation of the oxide passivation film. The chlorine overpotential at the oxide film was increased stepwise as the applied potential was made more positive. The stepped transitions of the chlorine overpotential was ascribed to the valence change of the oxide film. Platinum shows a typical N-shaped passivation at +0.65 V versus Ag/AgCl(0.1) which has been ascribed to the dissolution of platinum into Pt(II) ions and following formation of the passivation film of supersaturated Pt(II) chloride. Platinum was found to show another passivation phenomenon at high temperatures, above 450°C. The N-shaped current-potential curve was observed at +1.8 V which was far more positive than the potential of the standard chlorine electrode. The dissolution of platinum prior to the passivation was found to occur due to the formation of high valence platinum ions such as Pt⁶⁺ and Pt⁸⁺.     

NLO‐active maleimide copolymers with ­high glass transition temperatures

We synthesized some novel rigid NLO‐active maleimide copolymers bearing DR‐1 moieties ( PMPD , PHSD and PHND ). All copolymers exhibited high T_g's (190～197 °C), good solubilities for common solvents and excellent film‐forming properties. Dependence of film thickness on the d₃₃ value for the poled copolymer films induced by corona poling was investigated and it was demonstrated that in less than thickness of 0.3 µm decrease of the thickness gives rise to remarkable increase in the d₃₃ value. The poled copolymer films exhibited large d₃₃ values (270 × 10^?9 esu (film thickness 0.13 µm) for PMPD , 290 × 10^?9 esu (0.12 µm) for PHSD and 350 × 10^?9 esu (0.08 µm) for PHND ) as well as large r₃₃ values (51.0 pmV^?1 for PMPD and 60.4 pmV^?1 for PHND ) which are significantly large compared to the value of LiNbO₃ (31 pmV^?1) as a typical EO material. The d₃₃ values of the poled copolymers were kept constant even after standing 1000h at 80 °C, although a small decrease was observed at an initial stage. Further, the d₃₃ values did not change up to ca. 123 °C upon heating at the rate of 10 °C/min in all cases. Copyright © 2002 John Wiley & Sons, Ltd.     

Reactive oligomers. II. Polymerization of glycol bis(allyl phthalate)s and glycol bis(allyl succinate)s

Seven glycol bis(allyl phthalate)s (GBAP) and four glycol bis(allyl succinate)s (GBASu) as reactive oligomers were prepared and their polymerization behaviors were investigated in detail in terms of cyclopolymerization and gelation as compared with diallyl dicarboxylates. Thus, the rates of polymerization of GBAPs were reduced compared to diallyl phthalate, being attributed to the steric effect on the intermolecular propagation of the uncyclized radical, whereas those of GBASus were enhanced as a consequence of intermolecular association by dipole–dipole interaction in polar GBASu monomers. Cyclization was enhanced in the following order: diallyl aliphatic dicarboxylates series < GBASu series < GBAP series. Gelation was discussed according to Gordon's theory; the actual gel-point conversions increased with an increase in the molecular weight of monomers, although the discrepancy between actual and theoretical gel-point conversion inversely tended to be decreased. The decreased delay in gelation with an increase of the molecular weight of monomers is ascribed to the reduction of excluded volume effects on crosslinking.     

Small-Angle electron scattering and electron density in carbon dioxide

The total (elastic and inelastic) intensity of electrons scattered by CO₂ was measured in the s range of 1 to 12 Å^?1 and compared with the theoretical intensity calculated from the Hartree-Fock molecular wave function and those calculated for the independent-atom-model (IAM ) molecule. In the range of s ? 4 Å^?1 the electron correlation effect on the total scattered intensity was found to be represented by that for the IAM molecule.     

Synthesis and absolute configuration of +-lineatin,the pheromone of trypodendronlineatum

A new synthesis of (±), (+)- and (-)-lineatin (3,3,7-trimethyl-2, 9-dioxatricyclo [3.3.1.0^4,7] nonane, $\text{1}$) was achieved. The stereochemistry of (+)-lineatin was established as 1$\text{R}$, 4$\text{S}$, 5$\text{R}$, 7$\text{R}$ by an X-ray crystallographic analysis of an intermediate $\text{1}$$\text{5}$.