Surfactant-mixing effects on the interfacial tension and the microemulsion formation in water/supercritical CO2 system

The effects of surfactant mixing on interfacial tension and on microemulsion formation were examined for systems of air/water and water/supercritical CO2 (scCO2) interfaces and for water/scCO2 microemulsions. A fluorinated surfactant, sodium bis(1H,1H,2H,2H-heptadecafluorodecyl)-2-sulfosuccinate (8FS(EO)2), was mixed with the three hydrocarbon surfactants, Pluronic L31, Tergitol TMN-6, and decyltrimethylammonium chloride (DeTAC), at equimolar ratio. For all the cases, the interfacial tension was significantly lowered by the mixing. The positive synergistic effect suggests that the mixed surfactants tend to pack more closely on the interface than the pure constituents. It was found, however, that the microemulsion formation in scCO2 was never facilitated by the mixing, except for the case of TMN-6. This is probably due to the segregation of the surfactants into hydrocarbon-rich and fluorocarbon-rich phases on the microemulsion surface.     

Homoleptic Zincate‐Promoted Room‐Temperature Halogen–Metal Exchange of Bromopyridines

Homoleptic lithium tri‐ and tetraalkyl zincates were reacted with a set of bromopyridines. Efficient and chemoselective bromine–metal exchanges were realized at room temperature with a substoichiometric amount of nBu₄ZnLi₂?TMEDA reagent (1/3 equiv; TMEDA=N,N,N′,N′‐tetramethylethylenediamine). This reactivity contrasted with that of tBu₄ZnLi₂?TMEDA, which was inefficient below one equivalent. DFT calculations allowed us to rationalize the formation of N???Li stabilized polypyridyl zincates in the reaction. The one‐pot difunctionalization of dibromopyridines was also realized using the reagent stoichiometrically. The direct creation of C? Zn bonds in bromopyridines enabled us to perform efficient Negishi‐type cross‐couplings.     

Ion chromatographic separation of hydrogen ion and other common mono- and divalent cations

We introduced an approach to the ion chromatographic determination of common mono- and divalent cations including hydrogen ion and demonstrated the ability of a C30 column dynamically coated first with dodecylsulfate and then with 18-crown-6 ether to separate the cations by ion-exchange mechanism. Using an ethylenediamine solution containing a small concentration of 18-crown-6 ether and lithium dodecylsulfate at pH 6.2 as eluent, the cations were eluted in the order Li < Na+ < NH4+ < H+ < K+ < Mg2+ < Ca2+ with symmetrical peaks. The conductivity vs. concentration plots were linear about three orders of magnitude, from millimolar to micromolar; and the detection limits were all < 0.6 microM. Rainwater was analyzed directly using this ion chromatographic system with satisfactory results.     

Determination of monovalent inorganic anions in high-ionic-strength samples by electrostatic ion chromatography with suppressed conductometric detection

A new ion chromatographic (IC) system has been established by using micelles of 3-(N,N-dimethylmyristylammonio)propanesulfonate (Zwittergent 3-14) loaded onto a reversed-phase packed column as the separation column with an electronic rotary switching valve packed-bed suppressor for conductometric detection of inorganic anions. An aqueous H3BO3-Na2B4O7 solution has been demonstrated to be the most desirable eluent for this IC system. The relationship between retention time and the concentration of the borate eluent was determined for a series of model anionic analytes and this relationship was found to be opposite to that exhibited in a conventional anion-exchange IC system. The rapid elution and complete separation of monovalent inorganic anions were obtained by initially using a high-concentration borate solution as the eluent for a short-period, and then switching to a lower-concentration borate eluent to complete the separation. Detection limits for nitrite, bromide, nitrate, and chlorate were 0.85, 0.88, 0.95 and 4.8 microM, respectively, when a 7.0 mM Na2B4O7 eluent was used. Moreover, the ability to directly detect these monovalent anions in samples containing high concentrations of sulfate and/or chloride ions provided a major advantage of this approach.     

强碱阴离子交换树脂及碱性洗脱剂的离子排阻/阴离子交换色谱法同时测定NH4+ ，NO2-和NO3-（英文）

Ion-exclusion/anion-exchange chromatography(IEC/AEC) on a combination of a strongly basic anion-exchange resin in the OH——form with basic eluent has been developed.The separation mechanism is based on the ion-exclusion/penetration effect for cations and the anion-exchange effect for anions to anion-exchange resin phase.This system is useful for simultaneous separation and determination of ammonium ion(NH+4),nitrite ion(NO-2),and nitrate ion(NO-3) in water samples.The resolution of analyte ions can be manipulated by changing the concentration of base in eluent on a polystyrene-divinylbenzene based strongly basic anion-exchange resin column.In this study,several separation columns,which consisted of different particle sizes,different functional groups and different anion-exchange capacities,were compared.As the results,the separation column with the smaller anion-exchange capacity(TSKgel Super IC-Anion) showed well-resolved separation of cations and anions.In the optimization of the basic eluent,lithium hydroxide(LiOH) was used as the eluent and the optimal concentration was concluded to be 2 mmol/L,considering the resolution of analyte ions and the whole retention times.In the optimal conditions,the relative standard deviations of the peak areas and the retention times of NH+4,NO-2,and NO-3 ranged 1.28%-3.57% and 0.54%-1.55%,respectively.The limits of detection at signal-to-noise of 3 were 4.10 μmol/L for NH+4,1.87 μmol/L for NO-2 and 2.83 μmol/L for NO-3.     

Ruthenium-catalyzed propargylic substitution reactions of propargylic alcohols with oxygen-, nitrogen-, and phosphorus-centered nucleophiles

The scope and limitations of the ruthenium-catalyzed propargylic substitution reaction of propargylic alcohols with heteroatom-centered nucleophiles are presented. Oxygen-, nitrogen-, and phosphorus-centered nucleophiles such as alcohols, amines, amides, and phosphine oxide are available for this catalytic reaction. Only the thiolate-bridged diruthenium complexes can work as catalysts for this reaction. Results of some stoichiometric and catalytic reactions indicate that the catalytic propargylic substitution reaction proceeds via an allenylidene complex formed in situ, whereby the attack of nucleophiles to the allenylidene C(gamma) atom is a key step. Investigation of the relative rate constants for the reaction of propargylic alcohols with several para-substituted anilines reveals that the attack of anilines on the allenylidene C(gamma) atom is not involved in the rate-determining step and rather the acidity of conjugated anilines of an alkynyl complex, which is formed after the attack of aniline on the C(gamma) atom, is considered to be the most important factor to determine the rate of this catalytic reaction. The key point to promote this catalytic reaction by using the thiolate-bridged diruthenium complexes is considered to be the ease of the ligand exchange step between a vinylidene ligand on the diruthenium complexes and another propargylic alcohol in the catalytic cycle. The reason why only the thiolate-bridged diruthenium complexes promote the ligand exchange step more easily with respect to other monoruthenium complexes in this catalytic reaction should be that one Ru moiety, which is not involved in the allenylidene formation, works as an electron pool or a mobile ligand to another Ru site. The catalytic procedure presented here provides a versatile, direct, and one-step method for propargylic substitution of propargylic alcohols in contrast to the so far well-known stoichiometric and stepwise Nicholas reaction.     

Intramolecular Benzyne–Phenolate [4+2] Cycloadditions

An intramolecular benzyne–phenolate [4+2] cycloaddition is reported. Benzyne precursors, having vicinal halogen‐sulfonate functionalities, linked with a phenol(ate) by various tether groups undergo efficient intramolecular [4+2] cycloaddition by treatment with either Ph₃MgLi or nBuLi for halogen–metal exchange to form various benzobarrelenes.     

Rhodium-Catalyzed Highly Diastereo- and Enantioselective Synthesis of a Configurationally Stable S-Shaped Double Helicene-Like Molecule

An S-shaped double helicene-like molecule (>99 % ee), possessing stable helical chirality, has been synthesized by the rhodium(I)/difluorphos complex-catalyzed highly diastereo- and enantioselective intramolecular double [2+2+2] cycloaddition of a 2-naphthol- and benzene-linked hexayne. The collision between two terminal naphthalene rings destabilizes the helical chirality of the S-shaped double helicene-like molecule, but the introduction of two additional fused benzene rings significantly increases the configurational stability. Thus, no epimerization and racemization were observed even at 100 °C. The enantiopure S-shaped double helicene-like molecule forms a trimer through the multiple C−H⋅⋅⋅π and C−H⋅⋅⋅O interactions in the solid-state. The trimers stack to form columnar packing structures, in which neighboring stacks have opposite dipole directions. The accumulation of helical structures in the same direction in the S-shaped double helicene-like molecule enhanced the chiroptical properties.     

Characterization of posticlure and the structure-related sex pheromone candidates prepared by epoxidation of (6Z,9Z,11E)-6,9,11-trienes and (3Z,6Z,9Z,11E)-3,6,9,11-tetraenes

trans-11,12-Epoxy-(6Z,9Z)-6,9-henicosadiene (posticlure) has been identified from a pheromone gland of the lymantriid species, Orgyia postica. Since the diversity of Lepidoptera suggests that some species utilize the structure-related epoxy compound as a sex pheromone component, epoxydienes and epoxytrienes derived from (6Z,9Z,11E)-6,9,11-trienes and (3Z,6Z,9Z,11E)-3,6,9,11-tetraenes with a C₁₉–C₂₁ chain were systematically synthesized and the chemical data were accumulated in order to contribute to a new pheromone research. Peracid oxidation of each triene and each tetraene produced, respectively, a mixture of three epoxydienes (cis-6,7-epoxy-9,11-diene; cis-9,10-epoxy-6,11-diene; and trans-11,12-epoxy-6,9-diene) and four epoxytrienes (cis-3,4-epoxy-6,9,11-triene; cis-6,7-epoxy-3,9,11-triene; cis-9,10-epoxy-3,6,11-triene; and trans-11,12-epoxy-3,6,9-triene). While the 9,10-epoxy compounds were unstable and, interestingly, converted into 9-ketone derivatives after chromatography over SiO₂, each positional isomer was isolated by HPLC equipped with an ODS column, and the chemical structure was determined by NMR analysis. On the GC-MS analysis with a DB-23 column, the positional isomers were also eluted separately and characteristic mass spectra were proposed. By comparing the spectral data of the epoxy compounds with a different carbon chain, diagnostic fragment ions reflecting the chemical structure were determined as follows: m/z 79, 109, 113, and M-114 for the 6,7-epoxydienes; m/z 69, 97, 111, 139, and M-111 for the 9,10-epoxydienes; m/z 57, 79, 109, 136, M-151, and M-111 for the 11,12-epoxydienes; m/z 79, 91, 105, and 119 for the 3,4-epoxytrienes; m/z 79, 124, M-124, M-96, and M-69 for the 6,7-epoxytrienes; m/z 79, 95, 109, 137, and M-108 for the 9,10-epoxytrienes; and m/z 79, 134, M-149, M-109, and M-95 for the 11,12-epoxytrienes.     

Biomimetic reactions of germacrenes

The biomimetic reactions of epoxygermacrene-D ($\text{1}$) with basic alumina afforded three new interesting compounds ($\text{4}$, $\text{5}$, and $\text{6}$), two of which ($\text{4}$ and $\text{6}$) have the same carbon skeleton as that of periplanone-A ($\text{3}$), a sexual stimulant for the American cockroach. The remaining one ($\text{5}$) is a bicyclo[3.1.0]hexane derivative, from whch an axisonitrile-3 type compound ($\text{14}$) has been produced. Finally, preisocalamendiol ($\text{2}$) was also converted into $\text{6}$.