Ligand-activated lithium-mediated zincation of N-phenylpyrrole

Metalation of N-phenylpyrrole by using an in situ mixture of ZnCl(2)TMEDA (0.5 equiv; TMEDA=N,N,N',N'-tetramethylethylenediamine) and LiTMP (1.5 equiv; TMP=2,2,6,6-tetramethylpiperidino) was optimized. The reaction carried out at room temperature in THF resulted in incomplete metalation (56 % conversion) and selectivity (mixture of 2-iodo and 2,2'-diiodo derivatives in an 86:14 ratio after trapping with iodine). By using diethyl ether (DEE), toluene, or hexane instead of THF, low conversions of 17, 38, or 23 % were observed, respectively, but the formation of the diiodide was avoided. When hexane was used as solvent, strong lithium-complexing ligands such as [12]crown-4 and N,N'-dimethylpropylideneurea (DMPU) inhibited the reaction whereas more (hemi)labile ligands (TMEDA>THF approximately DME) favored it. This result shows that a temporary accessibility of lithium to interact with the rest of the base and/or the substrate is a prerequisite for an efficient metalation. A 75 % yield of 2-iodo-N-phenylpyrrole was obtained after reaction with the base in the presence of five equivalents of TMEDA for two hours at room temperature, and subsequent trapping with iodine. We were able to successfully replace the spare TMP with a less expensive butyl group.     

Investigation on the arrangement of lithium ions in LixLa(1/3)NbO3 with perovskite structure

The relationship between the Li arrangement and the electrochemical behavior has been examined as a function of composition x in electrochemically lithiated A-site deficient perovskite, Li(x)()La(1/3)NbO(3). The cell potential diagram and powder X-ray diffraction (XRD) study indicated that the Li ions are inserted into the vacant Perovskite A-site with an electrochemical reaction. In addition, the derivatives of the cell potential diagram showed three cathodic peaks, indicating a stepwise Li insertion mechanism takes place. Such a stepwise behavior would be ascribed to the changes in arrangement of inserted Li ions in the Perovskite lattice, since the XRD patterns of pristine La(1/3)NbO(3) showed that the La arrangement in La(1/3)NbO(3) was ordered along the c-axis, causing two kinds of A-site vacancies. To reveal the changes in the arrangement of Li ions, the entropy measurement of the reaction was performed by both the electrochemical and the calorimetric techniques. Moreover, the formation energy of the Perovskite structure with various Li arrangements was compared by using an ab initio calculation. The results of experiment and computation suggested that the electrochemical reaction proceeded via two kinds of superstructures of Li(1/6)La(1/3)NbO(3) and Li(1/2)La(1/3)NbO(3) due to the ordered arrangement of Li ions.     

Syntheses and structures of mono-, di- and tetranuclear rhodium or iridium complexes of thiacalix[4]arene derivatives

The reactions of [Cp*MCl2]2(Cp*=eta5-C5Me5, M = Rh, Ir) with thiacalix[4]arene (TC4A(OH)4) and tetramercaptothiacalix[4]arene (TC4A(SH)4) gave the mononuclear complexes [(Cp*M){eta3-TC4A(OH)2(O)2}] and the dinuclear complexes [(Cp*M)2{eta3eta3-TC4A(S)4}] respectively, while the analogous reactions with dimercaptothiacalix[4]arene (TC4A(OH)2(SH)2) produced the tetranuclear complexes [(Cp*M)2(Cp*MCl2)2-{eta3eta3eta1eta1-TC4A(O)2(S)2}].     

Inductive effect-assisted chain-growth polycondensation. synthetic development from para- to meta-substituted aromatic polyamides with low polydispersities

The polycondensation of m-(octylamino)benzoic acid esters (1) with base was investigated in order to extend the synthesis of well-defined condensation polymers from para-substituted polymers to meta-substituted ones. We expected that the aminyl anion of 2 would deactivate the ester moiety at the meta position of 2 owing to the strong inductive effect of the anion, resulting in, not self-polycondensation, but chain-growth polycondensation. The methyl ester monomer 1a polymerized with lithium hexamethyldisilazide (LiHMDS) in the presence of phenyl benzoate (3a) as an initiator at 0 degrees C to afford a polymer with a low polydispersity, but the product contained a small amount of self-condensation polymer. On the other hand, the polymerization of the ethyl ester monomer (1b) with phenyl 4-methylbenzoate (3b) proceeded through chain polymerization without self-polycondensation. The Mn values of the polymers increased linearly in proportion to the [1b]0/[3b]0 ratio, and the Mw/Mn ratios remained narrow over the entire [1b]0/[3b]0 range. Furthermore, a block copolymer of N-alkylated poly(m-benzamide) and poly(p-benzamide) with a low polydispersity was synthesized by the monomer addition method under this polymerization condition.     

Definitive assignments of the visible-near-IR bands of porphyrin-naphthalocyanine rare-earth sandwich double- and triple-decker compounds by magnetic circular dichroism spectroscopy

A series of heteroleptic rare-earth sandwich complexes [M(Nc)(OEP)] (M = La, Nd, Eu, Dy, and Lu; Nc = 2,3-naphthalocyaninate; OEP = octaethylporphyrinate) have been investigated by electronic absorption and magnetic circular dichroism (MCD) spectroscopy. The electronic absorption spectra of the neutral forms showed two characteristic transitions (bands I and II) in the near-IR region, both of which were systematically shifted depending on the size of their central metal. In the MCD spectra, a relatively intense Faraday A term and a significantly weak Faraday B term have been observed corresponding to bands II and I, respectively. The spectral features were successfully interpreted using a simple MO model by considering the relevant interactions of Gouterman's four orbitals of the constituent chromophores. The model succeeded in assigning the MCD spectra of the related compounds, the oxidized and reduced forms of the dimer ([M(Nc)(OEP)]+ and [M(Nc)(OEP)]-), and neutral forms of the triple-decker compounds (M2(Nc)(OEP)2, M = Nd, Eu). DFT calculations of the dimers supported the validity of this model.     

Ruthenium-catalyzed propargylic substitution reactions of propargylic alcohols with oxygen-, nitrogen-, and phosphorus-centered nucleophiles

The scope and limitations of the ruthenium-catalyzed propargylic substitution reaction of propargylic alcohols with heteroatom-centered nucleophiles are presented. Oxygen-, nitrogen-, and phosphorus-centered nucleophiles such as alcohols, amines, amides, and phosphine oxide are available for this catalytic reaction. Only the thiolate-bridged diruthenium complexes can work as catalysts for this reaction. Results of some stoichiometric and catalytic reactions indicate that the catalytic propargylic substitution reaction proceeds via an allenylidene complex formed in situ, whereby the attack of nucleophiles to the allenylidene C(gamma) atom is a key step. Investigation of the relative rate constants for the reaction of propargylic alcohols with several para-substituted anilines reveals that the attack of anilines on the allenylidene C(gamma) atom is not involved in the rate-determining step and rather the acidity of conjugated anilines of an alkynyl complex, which is formed after the attack of aniline on the C(gamma) atom, is considered to be the most important factor to determine the rate of this catalytic reaction. The key point to promote this catalytic reaction by using the thiolate-bridged diruthenium complexes is considered to be the ease of the ligand exchange step between a vinylidene ligand on the diruthenium complexes and another propargylic alcohol in the catalytic cycle. The reason why only the thiolate-bridged diruthenium complexes promote the ligand exchange step more easily with respect to other monoruthenium complexes in this catalytic reaction should be that one Ru moiety, which is not involved in the allenylidene formation, works as an electron pool or a mobile ligand to another Ru site. The catalytic procedure presented here provides a versatile, direct, and one-step method for propargylic substitution of propargylic alcohols in contrast to the so far well-known stoichiometric and stepwise Nicholas reaction.     

Cp2TiCl2-catalyzed regio- and chemoselective one-step synthesis of gamma-substituted allylsilanes from terminal alkenes using dianion-type zincate (SiSiNOL-Zn-ate)

A regio-/chemoselective silylation reaction of various functionalized terminal alkenes in the presence of titanocene dichloride, based on a newly designed dianion-type zincate, was developed. The present silylation of terminal alkenes is a powerful tool for the one-pot generation of regiocontrolled functionalized allysilanes, which are available for various transformation reactions, such as hydroxyalkylation, epoxidation, and hydroboration.     

Changes in electronic structure upon lithium insertion into the A-site deficient perovskite type oxides (Li,La)TiO3

Investigation on variation of the electronic structure accompanying the electrochemical lithium insertion into the perovskite type oxide, (Li,La)TiO3, has been carried out by X-ray absorption spectroscopy (XAS). During the electrochemical lithium insertion, titanium ion reduced its oxidation state from Ti4+ to Ti3+, while La3+ does not contribute to the reduction reaction resulting from Ti K-edge and La L3-edge XAS, respectively. Furthermore, O K-edge XAS showed marked spectral changes with electrochemical lithium insertion, indicating the electronic structure around oxide ion affected by lithium insertion reaction. From the XAS measurement, we have concluded the variation observed in O K-edge XAS was related to the strong interaction with inserted Li ion. To confirm this, first-principles band calculations were performed for the perovskite structure before and after electrochemical lithium insertion. The calculated results showed that the electron originated from inserted Li transferred to neighboring oxide ion locally as well as to Ti ion. This may be due to local neutralization effect of Li to reduce the electrostatic interaction in the crystal.     

Influences of Si pillar geometry on SiN-stressor induced local strain

The local strains in Si pillars induced by SiN stressors were quantitatively investigated as a function of geometry by micro-Raman scattering spectroscopy. Raman shifts of a cantilever microstructure were twice as large as those of a bridge microstructure. This difference was due to the different dimensions of the strains, i.e., biaxial strains in the cantilever type and uniaxial strains in bridge type. The thermal stability of the SiN stressor was also investigated. The results showed induced strains were stable after post-annealing at high temperature (∼1000 °C).     

Structural changes in poly(L-alanine) induced by heat treatment

Structural changes in poly(L -alanine)(PLA), a model compound related to tussah silk fibroin, induced by heat treatment have been studied by differential thermal analysis, x-ray diffraction, and infrared spectroscopy. PLA heated below 300°C shows x-ray patterns very similar to those of the α-helix crystalline phase, in addition to the diffraction patterns due to the β structure. Samples heated at 368°C exhibit predominantly the diffraction patterns due to the β crystalline phase. From infrared spectra, PLA samples heated below 280°C are found to be composed of all three molecular conformations: β sheet, random coil, and α helix. The intensity of the infrared absorption at 650 cm^?1 (amide V) assigned to the random coil conformation is decreased by heat treatment above 325°C. The content of the β-sheet structure remains almost constant when the specimen is heated below 325°C, and increases abruptly on heating to around 335°C, while the random coil content is decreased abruptly by heat treatment above 335°C. The α-helix content does not change, regardless of heat treatment. It is suggested therefore that the random coil conformation of PLA transforms directly into the β sheet on heat treatment above 335°C.