Xenophilic complexes bearing a Tp(R) Ligand, [Tp(R)M--M'Ln] [Tp(R) = Tp(iPr2), Tp(#) (Tp(Me2,4-Br)); M=Ni, Co, Fe, Mn; M'Ln = Co(CO)4, Co(CO)3(PPh3), RuCp(CO)2]: the two metal centers are held together not by covalent interaction but by electrostatic attraction

A series of dinuclear complexes, [Tp(R)M--M'L(n)] [Tp(iPr(2) )M--Co(CO)(4) (1; M=Ni, Co, Fe, Mn); Tp(#)M--Co(CO)(4) (1'; M=Ni, Co); Tp(#)Ni--RuCp(CO)(2) (3')] (Tp(iPr(2) )=hydrotris(3,5-diisopropylpyrazolyl)borato; Tp(#) (Tp(Me(2),4-Br))=hydrotris(3,5-dimethyl-4-bromopyrazolyl)borato), has been prepared by treatment of the cationic complexes [Tp(iPr(2) )M(NCMe)(3)]PF(6) or the halo complexes [Tp(#)M--X] with the appropriate metalates. Spectroscopic and crystallographic characterization of 1-3' reveals that the tetrahedral, high-spin Tp(R)M fragment and the coordinatively saturated carbonyl-metal fragment (M'L(n)) are connected only by a metal-metal interaction and, thus, the dinuclear complexes belong to a unique class of xenophilic complexes. The metal-metal interaction in the xenophilic complexes is polarized, as revealed by their nu(CO) vibrations and structural features, which fall between those of reference complexes: covalently bonded species [R--M'L(n)] and ionic species [M'L(n)](-). Unrestricted DFT calculations for the model complexes [Tp(H(2) )Ni--Co(CO)(4)], [Tp(H(2) )Ni--Co(CO)(3)(PH(3))], and [Tp(H(2) )Ni--RuCp(CO)(2)] prove that the two metal centers are held together not by covalent interactions, but by electrostatic attractions. In other words, the obtained xenophilic complexes can be regarded as carbonylmetalates, in which the cationic counterpart interacts with the metal center rather than the oxygen atom of the carbonyl ligand. The xenophilic complexes show divergent reactivity dependent on the properties of donor molecules. Hard (N and O donors) and soft donors (P and C donors) attack the Tp(R)M part and the ML(n) moiety, respectively. The selectivity has been interpreted in terms of the hard-soft theory, and the reactions of the high-spin species 1-3' with singlet donor molecules should involve a spin-crossover process.     

The surface of ordered mesoporous benzene-silica hybrid material: an infrared and ab initio molecular modeling study

Joint IR and computational results allow a detailed characterization of the surface properties of a mesoporous benzene-silica hybrid material with crystal-like wall structure. After outgassing at 450 degrees C, hydroxyl species mainly consist of noninteracting silanols, with both O-H and Si-O stretching modes at lower frequencies than those of SiOH in silica. Interaction with several probe molecules, followed both by experiment and calculus, shows that the aryl group in the coordination sphere of Si imparts a lesser acidity with respect to the isolated silanol in silica. In contrast, adsorption isotherms indicate that the interaction with acetone is stronger with benzene-silica than with silica: this is interpreted in terms of secondary interactions taking place between the slightly acidic CH in acetone and the electronic cloud in benzene-like rings. This suggests that both the inorganic component and the organic one play a role in dictating the surface behavior.     

Rh(I)-catalyzed Pauson-Khand reaction and cycloisomerization of allenynes: selective preparation of monocyclic, bicyclo[m.3.0], and bicyclo[5.2.0] ring systems

[reaction: see text] Rhodium(I)-catalyzed PKR of allenynes was found to be applicable for constructing azabicyclo[5.3.0]decadienone as well as oxabicyclo[5.3.0]decadienone frameworks. In addition, a reliable procedure for constructing a 10-monosubstituted bicyclo[5.3.0]deca-1,7-dien-9-one ring system by the rhodium(I)-catalyzed PKR of allenynes was developed under the condition of 10 atm of CO. Investigation of the rhodium(I)-catalyzed cycloisomerization of 4-phenylsulfonylnona-2,3-dien-8-ynes under nitrogen atmosphere gave the corresponding cyclohexene derivatives, whereas the C1-homologated allenynes produced cycloheptene derivatives and/or bicyclo[5.2.0]nonene skeletons depending on the substitution pattern at the allenic terminus. Thus, proper choice of the starting allenynes and reaction conditions led to the selective formation of 2-phenylsulfonylbicyclo[5.3.0]deca-1,7-dien-9-ones (Pauson-Khand-type product), 3-alkylidene-1-phenylsulfonyl-2-vinylcycloheptene derivatives, and bicyclo[5.2.0]nonene frameworks.     

Constituents of ophiuroidea. 1. Isolation and structure of three ganglioside molecular species from the brittle star Ophiocoma scolopendrina.

Three ganglioside molecular species, OSG-0 (1), OSG-1 (2), and OSG-2 (3) have been obtained from the polar lipid fraction of the chloroform/methanol extract of the brittle star Ophiocoma scolopendrina. The structures of these gangliosides have been determined on the basis of chemical and spectroscopic evidence as 1-O-[(N-glycolyl-alpha-D-neuraminosyl)-(2-->6)-beta-D-glucopyranosyl]-ceramide (1), 1-O-[8-O-sulfo-(N-acetyl-alpha-D-neuraminosyl)-(2-->6)-beta-D-glucopyranosyll-ceramide (2) and 1-O-[(N-glycolyl-alpha-D-neuraminosyl)-(2-->8)-(N-acetyl- and N-glycolyl-alpha-D-neuraminosyl)-(2-->6)-beta-D-glucopyranosyl]-ceramide (3). The ceramide moieties were composed of heterogeneous unsubstituted fatty acid, 2-hydroxy fatty acid and phytosphingosine units. Compounds 2 and 3 represent new ganglioside molecular species.     

The most favorable condition for lipid hydrolysis by Rhizopus delemar lipase in combination with a sugar–ester and alcohol W/O microemulsion system

The hydrophobic interfacial characterization of sugar–ester alcohol W/O microemulsion was investigated in order to develop a suitable design for reaction media. A W/O microemulsion system was prepared as a combination of sugar–ester, DK-ester-F-110 with alcohol as a cosolvent. The diameter of the sub-micron-sized water pool, the hydrophobicity of the water pool, and the fluidity of the micro-interface were studied to analyze the reactivity of Rhizopus delemar lipase in lipid hydrolysis. The diameter of the sub-micron sized water pool was measured by dynamic laser light scattering. It was proportional to the 0.33 power of W_soln and decayed with increasing alcohol concentration. The initial reaction rate of the hydrolysis of triolein in W/O microemulsion depended on the solubilized water content. The hydrophilic character of the micro-water pool was estimated from the fluorescence wavelength indicated by Coumarin 343. The maximum initial reaction rate appeared at 450–460 nm. The fluidity of the micro-interface was investigated by fluorescence anisotropy using TMA-DPH. A suitable physicochemical reaction condition for high reactivity to occur was found, satisfying both the hydrophilicity and the fluidity of the micro-interface.     

Nonlinear resonances and self-excited oscillations of a rotor caused by radial clearance and collision

This paper investigates oscillations in a flexible rotor system with radial clearance between an outer ring of the bearing and a casing by experiments and numerical simulations. The mathematical model considers the collisions of the bearing with the casing. The following phenomena are found: (1) Nonlinear resonances of subharmonic, super-subharmonic and combination oscillation occur. (2) Self-excited oscillation of a forward whirling mode occurs in a wide range above the major critical speed. (3) Entrainment phenomena from self-excited oscillation to nonlinear forced oscillation occur at these nonlinear resonance ranges. Moreover, this study analyzes periodic solutions of the mathematical model by the Harmonic Balance Method (HBM). As the results, the nonlinear resonances of subharmonic oscillation and its entrainment phenomenon can be explained theoretically by investigating the stability of the periodic solutions. The influence of the static force and the bearing damping on these oscillation are also clarified.     

A new wall-damping function for large eddy simulation employing Kolmogorov velocity scale

A new wall-damping function, based on the Kolmogorov velocity scale, for large eddy simulation (LES) is proposed, which accounts for the near-wall effect. To calculate the Kolmogorov velocity scale, u_ε, the dissipation rate of turbulent energy, ε, is needed. In LES, however, the dissipation rate is generally not solved, unlike in the Reynolds averaged Navier-Stokes (RANS) simulations, e.g., k-ε models. Although, in some previous studies, the dissipation rate of the subgrid-scale (SGS) turbulent energy, ε_SGS, is used instead of ε in calculating the Kolmogorov velocity scale, the scale obtained using such a method overly depends on the grid resolution employed and is generally inappropriate. Accordingly, the wall-damping function using the incorrect velocity scale also depends on the grid resolution and gives an inadequate wall effect. This is because ε_SGS contains only the components in the scale smaller than the grid-filter width, which obviously varies with the grid resolution employed. In this study, to overcome this problem, we propose a method for estimating the Kolmogorov velocity scale with a technique of conversion in LES, and the estimated one is utilized in the wall-damping function. The revised wall-damping function for LES is tested in channel flows and a backward-facing step flow. The results show that it yields a proper near-wall effect in all test cases which cover a wide range of grid resolution and Reynolds numbers. It is also shown that all three kinds of SGS models incorporating the present wall-damping function provide good predictions, and it is effective both in one-equation and 0-equation SGS models. These results suggest that the use of the proposed wall-damping function is a refined and versatile near-wall treatment in LES with various kinds of SGS models.     

Quantum set theory: Transfer Principle and De Morgan's Laws

In quantum logic, introduced by Birkhoff and von Neumann, De Morgan's Laws play an important role in the projection-valued truth value assignment of observational propositions in quantum mechanics. Takeuti's quantum set theory extends this assignment to all the set-theoretical statements on the universe of quantum sets. However, Takeuti's quantum set theory has a problem in that De Morgan's Laws do not hold between universal and existential bounded quantifiers. Here, we solve this problem by introducing a new truth value assignment for bounded quantifiers that satisfies De Morgan's Laws. To justify the new assignment, we prove the Transfer Principle, showing that this assignment of a truth value to every bounded ZFC theorem has a lower bound determined by the commutator, a projection-valued degree of commutativity, of constants in the formula. We study the most general class of truth value assignments and obtain necessary and sufficient conditions for them to satisfy the Transfer Principle, to satisfy De Morgan's Laws, and to satisfy both. For the class of assignments with polynomially definable logical operations, we determine exactly 36 assignments that satisfy the Transfer Principle and exactly 6 assignments that satisfy both the Transfer Principle and De Morgan's Laws.     

Electrical Conduction Mechanisms of MxPS3, M1−xM'xPS3 and their Intercalation Compounds

Abstract

In the M_xPS₃ and M_1?xM'_xPS₃ systems, the P₂S₆ cluster contributes to the poor electrical conductivity for the compounds in which the energy level of the metal 3d orbital is deeper than those of the P, S 3p orbitals. For the compounds in which metal 3d orbital is closed to P and S 3p orbitals and has mixed valency, the induced mixed valency of P₂S₆, cluster and/or hopping mechanism contribute to the electrical conductivity. In the organic electron donor intercalation into M_xPS₃ and M_1?xM'_xPS₃ compounds, the new intercalation reaction is discovered, in which formation of tris-complexes of metal ions with guest molecules occurs in the host interlayer.