Two chitinase-like proteins abundantly accumulated in latex of mulberry show insecticidal activity

Background  

Plant latex is the cytoplasm of highly specialized cells known as laticifers, and is thought to have a critical role in defense against herbivorous insects. Proteins abundantly accumulated in latex might therefore be involved in the defense system.     

Anionic polymerization of N,N‐dialkyl‐2‐methylenebut‐3‐enamide: Effect of alkyl substituents on polymerization behavior

Anionic polymerizations of three 1,3‐butadiene derivatives containing different N,N‐dialkyl amide functions, N,N‐diisopropylamide (DiPA), piperidineamide (PiA), and cis‐2,6‐dimethylpiperidineamide (DMPA) were performed under various conditions, and their polymerization behavior was compared with that of N,N‐diethylamide analogue (DEA), which was previously reported. When polymerization of DiPA was performed at ?78 °C with potassium counter ion, only trace amounts of oligomers were formed, whereas polymers with a narrow molecular weight distribution were obtained in moderate yield when DiPA was polymerized at 0 °C in the presence of LiCl. Decrease in molecular weight and broadening of molecular weight distribution were observed when polymerization was performed at a higher temperature of 20 °C, presumably because of the effect of ceiling temperature. In the case of DMPA, no polymer was formed at 0 °C and polymers with relatively broad molecular weight distributions (M_w/M_n = 1.2) were obtained at 20 °C. The polymerization rate of PiA was much faster than that of the other monomers, and poly(PiA) was obtained in high yield even at ?78 °C in 24 h. The microstructure of the resulting polymers were exclusively 1,4‐ for poly(DMPA), whereas 20–30% of the 1,2‐structure was contained in poly(DiPA) and poly(PiA). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3714–3721, 2010     

Predicted radiolysis yield in a Fricke solution irradiated with various heavy ions

Experimental data on the spatial distribution of the energy deposited around an energetic heavy ion, from 1 MeV proton to 5.9 MeV/n uranium ion, which have been reported in the literature were documented to obtain a scaled radial dose distribution; (β/Z*)² D(Z*, β,t)=200 (for t=0–1), 200/t² (for t=1t_c), and 200 t_c/t³ (for t>t_c) where Z* and β are the effective charge and velocity relative to c, the velocity of light, of the incident ion, respectively, D the dose in unit of Gy, t the radial distance in unit of nm, t_c the critical distance empirically determined.

Then, if we know the yield of any chemical reaction as a function of dose from the results of experiments using γ-radiations or fast electrons or theoretical calculations, we can calculate the probability for the yield of the chemical reaction in the system bombarded with a heavy ion of the effective charge Z* and velocity β. The results of the present calculation of the LET-values and of G(Fe³⁺) in the ferrous sulfate acidic solution are presented and compared with reported experimental results.     

利用水下爆炸法评价火炸药爆炸危险性的研究

本文提供了一种测定火炸药冲击感度,并根据测定值判定其冲击爆炸危险性的新方法测定水下爆炸气泡能法。通过对30几种炸药的试用,判定的结果与文献报道的用其他方法判定的结果相当好的一致。而且本法的优点还在于同时可得到试样的动、静态威力,操作简便、安全、噪音小。此外,利用本试验法还探讨了炸药形态、惰性介质(水)对冲击感度的影响。这些对于处理炸药时应如何采取安全对策具有指导意义。     

Generation of Aryl(2‐lithiophenyl)methanone O‐Methyl Oximes and Their Use for the Synthesis of N‐(3‐Alkyl‐1‐aryl‐ or 1,3‐diaryl‐1H‐isoindol‐1‐yl)‐O‐methylhydroxylamines via the Reaction with Nitriles

An efficient two‐step procedure for the preparation of a new type of 1H‐isoindoles, i.e., N‐(3‐alkyl‐1‐aryl‐ or 1,3‐diaryl‐1H‐isoindol‐1‐yl)‐O‐methylhydroxylamines 5 , from readily available aryl(2‐bromophenyl)methanones 1 has been developed. Aryl(2‐bromophenyl)methanone O‐methyloximes 2 , derived from the corresponding ketones, were treated with BuLi in Et₂O at 0° to generate novel lithium compounds, aryl(2‐lithiophenyl)methanone O‐methyloximes 3 , which were allowed to react with nitriles to give the desired products 5 in moderate‐to‐fair yields.     

Influence of particle design on oral absorption of poorly water-soluble drug in a silica particle-supercritical fluid system

The physicochemical characteristics and oral absorption of a poorly water-soluble drug, K-832, adsorbed onto porous silica (Sylysia 350), were compared with those of K-832 adsorbed onto non-porous silica (Aerosil 200). K-832 and silica were treated with supercritical CO(2) (scCO(2)) to produce K-832-Sylysia 350 and K-832-Aerosil 200 formulations. Scanning electron microscopy, polarizing microscopy, powder X-ray diffraction, and differential scanning calorimetry results suggested that K-832 mainly existed in an amorphous state in both formulations. The specific surface area of both formulations was much larger than that of pure K-832 crystals. The dissolution rate of K-832 from both formulations was considerably greater than that from corresponding physical mixtures due to rapid wetting of the hydrophilic carrier surfaces and amorphous state, the dissolution from the K-832-Sylysia 350 formulation being the fastest. In vivo absorption tests on the two formulations indicated no significant differences in their peak concentration (C(max)) and the area under their plasma concentration-time curve (AUC), while the concentrations of K-832 in the K-832-Sylysia 350 formulation were significantly higher than those in the K-832-Aerosil 200 formulation 1 h and 1.5 h after administration of these formulations (p<0.05). This could be attributed to the different dispersion states of K-832 in the formulations due to their different three-dimensional structures (porous and non-porous). In physical stability tests, the amorphous drugs in both formulations were stable at room temperature for at least 14 months. Thus, the absorption of poorly water-soluble drugs could be greatly improved by adsorption onto porous silica using scCO(2).     

7Li NMR studies on complexation reactions of lithium ion with cryptand C211 in ionic liquids: comparison with corresponding reactions in nonaqueous solvents

(7)Li NMR spectra of DEME-TFSA [DEME=N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium; TFSA=bis(trifluoromethanesulfonyl)amide], EMI-TFSA (EMI=1-ethyl-3-methylimidazolium), MPP-TFSA (MPP = N-methyl-N-propylpyridinium), DEME-PFSA [PFSA=bis(pentafluoroethanesulfonyl)amide], and DEME-HFSA [HFSA=bis(heptafluoropropanesulfonyl)amide] ionic liquid (IL) solutions containing LiX (X=TFSA, PFSA, or HFSA) and C211 (4,7,13,18-tetraoxa-1,10-diazabicyclo[8.5.5]eicosane) were measured at various temperatures. As a result, it was found that the uncomplexed Li(I) species existing as [Li(X)(2)](-) in the present ILs exchange with the complexed Li(I) ([Li·C211](+)) and that the exchange reactions proceed through the bimolecular mechanism, [Li·C211](+) + [*Li(X)(2)](-)=[*Li·C211](+) + [Li(X)(2)](-). Kinetic parameters [k(s)/(kg m(-1) s(-1)) at 25 °C, ΔH(++)/(kJ mol(-1)), ΔS(++)/(J K(-1) mol(-1))] are as follows: 5.57×10(-2), 69.8 ± 0.4, and -34.9 ± 1.0 for the DEME-TFSA system; 5.77×10(-2), 70.6 ± 0.2, and -31.9 ± 0.6 for the EMI-TFSA system, 6.13×10(-2), 69.0 ± 0.3, and -36.7 ± 0.7 for the MPP-TFSA system; 1.35 × 10(-1), 65.2 ± 0.5, and -43.1 ± 1.4 for the DEME-PFSA system; 1.14×10(-1), 64.4 ± 0.3, and -47.1 ± 0.6 for the DEME-HFSA system. To compare these kinetic data with those in conventional nonaqueous solvents, the exchange reactions of Li(I) between [Li·C211](+) and solvated Li(I) in N,N-dimethylformamide (DMF) and dimethyl sulfoxide (DMSO) were also examined. These Li(I) exchange reactions were found to be independent of the concentrations of the solvated Li(I) and hence proposed to proceed through the dissociative mechanism. Kinetic parameters [k(s)/s(-1) at 25 °C, ΔH(++)/(kJ mol(-1)), ΔS(++)/(J K(-1) mol(-1))] are as follows: 1.10 × 10(-2), 68.9 ± 0.2, and -51.3 ± 0.4 for the DMF system; 1.13×10(-2), 76.3 ± 0.3, and -26.3 ± 0.8 for the DMSO system. The differences in reactivities between ILs and nonaqueous solvents were proposed to be attributed to those in the chemical forms of the uncomplexed Li(I) species, i.e., the negatively charged species ([Li(X)(2)](-)) in ILs, and the positively charged ones ([Li(solvent)(n)](+)) in nonaqueous solvents.     

Impaired pulmonary blood flow distribution in congestive heart failure assessed using synchrotron radiation microangiography

Synchrotron radiation microangiography is a powerful tool for assessing adverse changes in pulmonary vessel density associated with primary pulmonary hypertension (PH). Congestive heart failure (CHF) leads to a `secondary' onset of PH, yet it is unknown whether secondary PH is also associated with reduced vessel density. This study utilized synchrotron radiation to assess both pulmonary vessel density and endothelial function in a Dahl rat model of CHF with secondary PH. High salt‐fed Dahl salt‐sensitive (Dahl‐S) and salt‐resistant (Dahl‐R) rats were anesthetized and microangiography was performed to assess the pulmonary vessel density and vascular responses to (i) sodium nitroprusside (5.0 µg kg^?1 min^?1), (ii) acetylcholine (3.0 µg kg^?1 min^?1) and (iii) ET‐1_A receptor blockade, BQ‐123 (1 mg kg^?1). Dahl‐S rats developed CHF and secondary PH as evident by endothelial dysfunction, impaired vasodilatory responses to acetylcholine, enhanced vasodilatory responses to BQ‐123 and extensive pulmonary vascular remodeling. Consequently, the pulmonary vessel density was adversely reduced. Interestingly, the etiology of secondary PH manifests with structural and functional changes that are comparable with that previously reported for primary PH. One important discrepancy, however, is that ET‐1 modulation of pulmonary vessels is most striking in vessels with a diameter range of 100–200 µm in secondary PH, in contrast to a range of 200–300 µm in primary PH. Such discrepancies should be considered in future studies investigating primary and secondary forms of PH.