Determination of pheophytinatonickel(II) by reversed-phase highperformance liquid chromatography

Summary HPLC determination of pheophytinatonicke(II) (Pheo-Ni) prepared by the replacement of magnesium(II) in chlorophyll with nicke(II) is described. The good separation of PheoNi was obtained by using chemically bonded C₁₈ as the stationary phase and acetone-methanol (50∶50, vol/vol) as the mobile phase. Conventional spectrophotometric method was also used for the determination of PheoNi. For the synthetic samples prepared by mixing (pheophytinato a) nicke(II) [(Pheo-a) Ni] and (pheophytinato b) nicke(II) [(Pheo-b) Ni], analytical values obtained by the spectrophotometric method were very high compared to those obtained by HPLC. In the proposed HPLC method, (Pheo-a) Ni and (Pheo-b). Ni could be determined in the concentration range of 0.028–30μg/ml and 0.038–30μg/ml with relative standard deviations (n=10) of 3.1% and 0.8%, respectively.     

Amperometric biosensor based on reductive H2O2 detection using pentacyanoferrate-bound polymer for creatinine determination

Pentacyanoferrate-bound poly(1-vinylimidazole) (PVI[Fe(CN)₅]) was selected as a mediator for amperometric creatinine determination based on the reductive H₂O₂ detection. Creatinine amidohydrolase (CNH), creatine amidohydrolase (CRH), sarcosine oxidase (SOD), peroxidase (POD), and PVI[Fe(CN)₅] were crosslinked with poly(ethylene glycol) diglycidyl ether (PEGDGE) on a glassy carbon (GC) electrode for a creatinine biosensor fabrication. Reduction current was monitored at −0.1 V in the presence of creatinine and O₂. It is revealed that PVI[Fe(CN)₅] is suitable as a mediator for a bioelectrocatalytic reaction of POD, since PVI[Fe(CN)₅] neither reacts with reactants nor works as an electron acceptor of SOD. The amounts of PVI[Fe(CN)₅], PEGDGE, and enzymes were optimized toward creatinine detection. Nafion as a protecting film successfully prevented the enzyme layer from interferences. The detection limit and linear range in creatinine determination were 12 μM and 12–500 μM (R² = 0.993), respectively, and the sensitivity was 11 mA cm⁻² M⁻¹, which is applicable for urine creatinine tests. The results of the creatinine determination for four urine samples measured with this proposed method were compared with Jaffe method, and a good correlation was obtained between the results.     

Surface modification for nano‐lignocellulose fiber through vapor‐phase‐assisted surface polymerization

This study addresses the inherent issues surrounding surface modification methods of nanofibers and proposes an environmentally friendly and less toxic strategy for the surface modification of hydrophilic nanofiber. From the continuation of our previous work, which discussed the easy production of nanofiber (average size: 127 nm) from oil palm mesocarp fiber (OPMF), in this work, the surface of nanofibers (M‐IL‐OPMF) were modified through vapor‐phase‐assisted surface polymerization (VASP) to improve the affinity of interface between the polymer grafted M‐IL‐OPMF and non‐polar matrix. VASP of ε‐caprolactone was successfully proceeded from the [M‐IL‐OPMF] at 70 °C for 24 h and 72 h, and compositions were estimated to be 35.7% fiber/64.3% polymer and 27.8% fiber/72.2% polymer. To confirm the grafting of PCL, size‐exclusion chromatography (SEC) and Fourier transform infrared (FT‐IR) spectroscopy, thermogravimetry (TG), and dispersibility test in hydrophobic solvent were carried out. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2575–2580     

Synthesis of Substituted Phenyl Esters of Amino Acids and Polycondensation in Langmuirblodgett Films

Long-alkyl-chain phenyl esters of β-alanine, glycine, and L-valine were prepared, and their monolayer properties were correlated with their molecular structures. These compounds formed stable monolayers on acidic subphases. In particular, the p-hexadecylphenyl esters of β-alanine and glycine were remarkably stable, and their monolayers could be deposited on calcium fluoride plates as Y-type film by Blodgett's technique. The polycondensation of multilayers under an atmosphere saturated with triethylamine was investigated by changes in the IR spectra. It was determined that the polycondensation proceeded by a first-order reaction mechanism in the initial stage and that the rate in multilayers was faster than that in the bulk crystalline powder. These results suggest that the polycondensation is accelerated by a regular arrangement of the monomer in the multilayers, where the active sites are concentrated and located better for the polycondensation. In the case of the polycondensation in multilayers of the glycine ester, two kinds of condensation proceeded to afford poly(glycine) and 2,5-piperazinedione.     

Synthesis of L-Lysine and L-Glutamic Acid Derivatives with Long Alkyl Chains and Polycondensation of Langmuir-Blodgett Films

Two esters of L-lysine and L-glutamic acid containing long alkyl groups were synthesized and their polycondensation in monolayers and multilayers was investigated. The pressure-area isotherms of the ester of L-lysine depend markedly on the time of residence at the air-water interface. The change of FT-IR spectra of the deposited film, which can be lifted as a Z-type film, indicates that polycondensation can occur in the monolayer at 10°C without any treatment. The spectrum of the film cast from chloroform hardly changed with time. These results lead to the conclusion that a regular arrangement of monomer molecules in the monolayer, where the amino and ester carbonyl groups are concentrated, is more suitable for the polycondensation. The ester of L-glutamic acid can also form stable monolayers which can be easily deposited on a hydrophobic plate as a Y-type film by the Blodgett technique. The polycondensation of multilayers under an atmosphere of triethylamine was investigated by IR spectroscopy. It indicates that the condensation in multilayers proceeds via intermolecular and intramolecular reactions, by which poly(L-glutamate) derivatives and 2-pyrrolidone derivatives are formed, respectively. The condensation in the bulk crystalline powder gives exclusively the 2-pyrrolidone derivative by intramolecular reaction. These results suggest that the monomer molecules in the multilayers are favorably aligned for the intermolecular reaction, in contrast to the situation in the bulk crystalline powder.     

One-dimensional beam ordering of protons in a storage ring

The ordering of protons has been observed at a new storage ring, S-LSR, at Kyoto University. Abrupt jumps in the momentum spread and the Schottky noise power were observed for protons for the first time at a particle number of approximately 2000, upon applying electron cooling with electron currents of 25, 50, and 100 mA. The transition temperature was 0.17 and 1 meV in the longitudinal and transverse directions, respectively. The transverse temperature of the proton beam was much below that of electrons at the transition, which played an essential role in the ordering of protons.     

Catalytic Activity of Molecular Rhenium Sulfide Clusters [Re6S8(OH)6−n (H2O) n ](4−n)− (n = 0, 2, 4, 6) with Retention of the Octahedral Metal Frameworks: Dehydrogenation and Dehydration of 1,4-Butanediol

A series of molecular rhenium sulfide clusters [Re₆S₈(OH)_6?n (H₂O) _n ]^(4?n)? (n = 0, 2, 4, 6) catalyze dehydrogenation of alcohols, and hydrogenation of ketones and olefins in a hydrogen stream at 350 °C. The catalytic activities of the dianionic and neutral clusters (n = 2, 4) are lower than those of tetraanionic and dicationic clusters (n = 0, 6) for all the reactions. When 1,4-butanediol is allowed to react over K₄[Re₆S₈(OH)₆], dehydrogenation proceeds to yield 2-hydroxytetrahydrofuran and successively γ-butyrolactone above 300 °C. Over [Re₆S₈(H₂O)₆]SO₄ dehydration proceeds to yield tetrahydrofuran above 250 °C. The thermal activation mechanisms of these clusters were studied by powder X-ray diffraction analyses, Raman spectrometry, extended X-ray absorption fine structure spectrometry, thermogravimetry, and differential thermal analyses. The catalytically active site of K₄[Re₆S₈(OH)₆] is an uncoordinated metal site (Lewis acid site) developed by the loss of a water molecule from two hydroxo ligands. The active site of [Re₆S₈(H₂O)₆]SO₄ is a Brønsted acid site; the anhydrous aqua cluster dication disproportionates to a hydroxo cluster monocation and a proton. Both of the octahedral cluster frameworks are retained up to 500 °C.     

Biomimetic oxidation of thiol and application to odor-removing fiber

The oxidation of HO-CH₂-CH₂-SH (RSH) by molecular oxygen and Fe(III)- as well as Co(II)-multicarboxyphthalocyanine and the mechanism in homogeneous aqueous system were investigated. As application to enzyme-like heterogeneous catalysts, Fe(III)-as well as Co(II)-octacarboxyphthalocyanine were supported on amorphous enriched rayon staple fiber and their enzyme-like activities were estimated. These fibers were applicated to new odor-removers acting as artificial enzyme systems.     

Alternating copolymers consisting of arylalkyl methacrylates. II. Effect of coil collapse on fluorescence spectra of alternating copolymers of 2-(9-carbazolyl)ethyl methacrylate and aromatic vinyl monomers

Alternating and random copolymers of 2-(9-carbazolyl)ethyl methacrylate with aromatic vinyl monomers were synthesized and their fluorescence properties were compared in good and poor solvents. Contraction of the polymer coils induced the hypochromic effect, i.e., the mutual interaction of the ground-state chromophores, but caused little quenching of their excited state. This is sharp in contrast with the vinyl-type of polymers, exhibiting large interactions in both the ground and excited states. Introduction of bulky groups on the comonomers in the alternating copolymers further suppressed these interactions. © 1996 John Wiley & Sons, Inc.     

Preparation of palladium clusters protected by silica-supported,crosslinking, partially phosphorylated poly(vinyl alcohol) and their catalytic activity

The palladium cluster protected by silica-supported, crosslinking, partially phosphorylated poly(vinyl alcohol) (P-PVA) was prepared from a crosslinking P-PVA–Pd(II) complex by reduction in alcohol. The P-PVA–Pd complex and the palladium cluster protected by P-PVA were analyzed by electron spectroscopy, X-ray photoelectron spectrometry and transmission electron microscopy. The complex formation between the Pd(II) ion and phosphoric acid groups in P-PVA was important in the formation of a fine palladium cluster. Palladium clusters protected by silica-supported crosslinking P-PVA were used as catalysts for the hydrogenation of nitrobenzene or acrylic acid at 30°C under atmospheric pressure. The palladium cluster protected by crosslinking P-PVA supported on silica was the most active catalyst, was stable and had no by-products, compared with the palladium cluster protected by silica-supported noncrosslinking P-PVA or PVA.