Application to Photocatalytic H2 Production of a Whole‐Cell Reaction by Recombinant Escherichia coli Cells Expressing [FeFe]‐Hydrogenase and Maturases Genes

A photocatalytic H₂ production system using an inorganic–bio hybrid photocatalyst could contribute to the efficient utilization of solar energy, but would require the development of a new approach for preparing a H₂‐forming biocatalyst. In the present study, we constructed a recombinant strain of Escherichia coli expressing the genes encoding the [FeFe]‐hydrogenase and relevant maturases from Clostridium acetobutylicum NBRC 13948 for use as a biocatalyst. We investigated the direct application of a whole‐cell of the recombinant E. coli. The combination of TiO₂, methylviologen, and the recombinant E. coli formed H₂ under light irradiation, demonstrating that whole cells of the recombinant E. coli could be employed for photocatalytic H₂ production without any time‐consuming and costly manipulations (for example, enzyme purification). This is the first report of the direct application of a whole‐cell reaction of recombinant E. coli to photocatalytic H₂ production.     

An efficient 1,3-dipolar cycloaddition between aromatic selenoaldehydes and nitrile oxides or nitrile imines: an easy access to selenium-containing five-membered heterocyclic ring system

1,3-Dipolar cycloaddition between aromatic selenoaldehydes, generated by thermal retro Diels-Alder reaction of anthracene cycloadducts, and nitrile oxides or nitrile imines proceeded efficiently to give the corresponding [3+2] cycloadducts as a single isomer in good yields, being 1,4,2-oxaselenazoles or 1,3,4-selenadiazoles, respectively.     

Topological “interfacial” polymer chemistry: Dependency of polymer “shape” on surface morphology and stability of layer structures when heating organized molecular films of cyclic and linear block copolymers of n‐butyl acrylate‐ethylene oxide

The “topological polymer chemistry” of amphiphilic linear and cyclic block copolymers at an air/water interface was investigated. A cyclic copolymer and two linear copolymers (AB‐type diblock and ABA‐type triblock copolymers) synthesized from the same monomers were used in this study. Relatively stable monolayers of these three copolymers were observed to form at an air/water interface. Similar condensed‐phase temperature‐dependent behaviors were observed in surface pressure–area isotherms for these three monolayers. Molecular orientations at the air/water interface for the two linear block copolymers were similar to that of the cyclic block copolymer. Atomic force microscopic observations of transferred films for the three polymer types revealed the formation of monolayers with very similar morphologies at the mesoscopic scale at room temperature and constant compression speed. ABA‐type triblock linear copolymers adopted a fiber‐like surface morphology via two‐dimensional crystallization at low compression speeds. In contrast, the cyclic block copolymer formed a shapeless domain. Temperature‐controlled out‐of‐plane X‐ray diffraction (XRD) analysis of Langmuir–Blodgett (LB) films fabricated from both amphiphilic linear and cyclic block copolymers was performed to estimate the layer regularity at higher temperatures. Excellent heat‐resistant properties of organized molecular films created from the cyclic copolymer were confirmed. Both copolymer types showed clear diffraction peaks at room temperature, indicating the formation of highly ordered layer structures. However, the layer structures of the linear copolymers gradually disordered when heated. Conversely, the regularity of cyclic copolymer LB multilayers did not change with heating up to 50 °C. Higher‐order reflections (d₀₀₂, d₀₀₃) in the XRD patterns were also unchanged, indicative of a highly ordered structure. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 486–498     

QUATERNARY STRUCTURE OF PEA PHYTOCHROME I DIMER STUDIED WITH SMALL-ANGLE X-RAY SCATTERING and ROTARY-SHADOWING ELECTRON MICROSCOPY

Abstract— The quaternary structure of pea phytochrome type I (PI) dimer in the red-light-absorbing form was studied by small-angle X-ray scattering (SAXS) technique and rotary-shadowing electron microscopy. Structural parameters for PI 114 kDa chromopeptide dimer and its tryptically digested N-terminal 59 kDa chromopeptide monomer, such as average electron density, molecular volume and the second moment of electron density distribution, were determined in terms of SAXS using the contrast variation method. Furthermore, by means of model simulation for the scattering profiles of the chromopeptides, most plausible structural models for both peptides were constructed. The distance between the chromophoric domains was estimated to be about 70 A in the resultant model for 114 kDa chromopeptide dimer. Furthermore, the model was consistent with the electron-micrographic images of both the intact PI dimer and the PI 114 kDa chromopeptide dimer, so that the N-terminal 7 kDa fragment did not significantly contribute the low-resolution images of the dimer.     

Molecular aggregates of partially fluorinated quaternary ammonium salt gemini surfactants

The size and shape of novel partially fluorinated gemini surfactant 1,2-bis[dimethyl-(3-perfluoroalkyl-2-hydroxypropyl)ammonium]ethane bromide (CnFC3-2-C3CnF, where n=4, 6, and 8) were investigated in aqueous solution by means of light scattering and transmission electron microscopy (TEM). The sizes of these molecular aggregates changed with increasing carbon number of the alkyl chain and concentration. For example, the apparent hydrodynamic radius by dynamic light scattering was 18 nm at a concentration of cmcx5 for n=4, 115 nm at the cmcx15 for n=6, and 62 nm at the cmcx30 for n=8, at 298.2 K. The shapes of CnFC3-2-C3CnF aggregates drastically changed with the alkyl chain length; the aggregates were mainly in the form of large or irregular small aggregates (n=4), string-like aggregates (n=6), and vesicles (n=8). The bromide-ion activity was measured using a bromide-ion-selective electrode to determine the degree of counterion binding to the aggregates. The degree of counterion binding to aggregate was very small compared with that in the typical hydrogenated gemini surfactants. These results indicated that the small curvature of large aggregates was not influenced by an electrostatic repulsion between the cationic head groups in the case of the bulky molecular volume of fluorinated gemini surfactants.     

Study on the base-catalyzed reverse vinylogous aldol reaction of (4abeta,5beta)-4,4a,5,6,7,8-hexahydro-5-hydroxy-1,4a-dimethylnaphthalen-2(3H)-one under Robinson annulation conditions

[reaction: see text] We have proposed a pathway for the base-catalyzed reverse vinylogous aldol reaction of (-)-(4abeta,5beta)-4,4a,5,6,7,8-hexahydro-5-hydroxy-1,4a-dimethylnaphthalen-2(3H)-one [(-)-8] under Robinson annulation conditions. For confirmation, 4-(2,6-dimethyl-3-oxocyclohex-1-enyl)butanal (11) and 4-(2,6-dimethyl-5-oxocyclohex-1-enyl)butanal (12), both of which potentially produce enolate I, were synthesized regioselectively. Unexpectedly, 11 gave a complex mixture, including only a trace amount of (+/-)-8 (less than 5% yield), under these basic conditions. To the contrary, 12 cleanly afforded (+/-)-8 in 66% yield. This result provides evidence for our proposed mechanism of the above reaction.     

Purification of boron nitride nanotubes through polymer wrapping

An effective method was proposed to remove obstinate boron nitride phase impurities in boron nitride nanotubes (BNNTs). The method is based on strong interactions between BNNTs and a conjugated polymer wrapping them and significant weight and size difference between BNNTs and impurities. The as-grown samples and purified samples were compared through detailed characterization, using scanning electron microscopy, transmission electron microscopy, and Raman and Fourier transformed infrared spectroscopy. The results reveal that impurities are effectively removed and resultant BNNTs possess perfect crystallization.     

A study of electronic structures of Pt3M (M=Ti,V,Cr,Fe,Co,Ni) polycrystalline alloys with valence-band photoemission spectroscopy

The surface valence-band densities of states (DOS) of Pt(3)M (M=Ti,V,Cr,Fe,Co,Ni) polycrystalline alloys were investigated with ultraviolet photoemission spectroscopy. Upon annealing the ion-sputter-cleaned alloys at high temperatures, the observed valence-band DOS spectra clearly show the modified electronic structures on the surfaces suggesting the surface segregation of Pt as predicted in thermodynamic models. The measured d-band centers and widths for the annealed alloy surfaces show qualitatively the same trend as predicted by density-functional-theory calculations based on the model of a Pt "skin" on the topmost surface layer and a subsurface layer enriched in the 3d transition metal.     

Dependence of molecular recognition of fullerene derivative on the adlayer structure of zinc octaethylporphyrin formed on Au(100) surface

Adlayers of ZnOEP were prepared on reconstructed Au(100)-(hex) and unreconstructed Au(100)-(1 x 1) surfaces by immersing into a benzene solution containing ZnOEP molecules, and the adlayer structures were characterized by scanning tunneling microscopy (STM). A hexagonally arranged ZnOEP array was formed on an Au(100)-(hex) surface, whereas a rectangularly arranged ZnOEP array was found on an Au(100)-(1 x 1) surface. The adlayer structure of ZnOEP was dependent upon the underlying Au atomic arrangements. Furthermore, an investigation of the spuramolecular assembly for these modified surfaces was carried out by using an open-cage C(60) derivative (opened C(60)). A supramolecular assembled adlayer with a 1:1 composition of opened C(60)/ZnOEP was formed on Au(100)-(hex), whereas aggregates of opened C(60) were found on the ZnOEP-modified Au(100)-(1 x 1) surface. Electrochemical responses of opened C(60) were significantly influenced by underlying ZnOEP arrays. This finding suggests that precise control of underlying ZnOEP adlayers with the Au atomic structure is important to recognize the opened C(60) on them.