Palladium-catalyzed asymmetric synthesis of axially chiral allenylsilanes and their application to SE2' chirality transfer reactions

Stepwise application of the Pd-catalyzed S(N)2' reaction and the desilylative S(E)2' reaction to the ambivalent 2-bromo-1-silyl-1,3-dienes provides a novel route to the highly enantioselective construction of tertiary and quaternary propargylic stereogenic centers via axially chiral allenylsilanes.     

Desorption of InOH from indium oxides under exposure to atomic hydrogen

Species desorbing from indium oxides under exposure to atomic hydrogen (H) were observed with a quadrupole mass spectrometer. The desorption of InOH was detected at a temperature as low as 410°C, which is in contrast with the fact that, with molecular hydrogen, a much higher temperature (850°C) was required to generate InOH. Upon the interruption of H generation, the InOH signal disappeared immediately, suggesting that H is involved in the reactions leading to InOH desorption. Relevance to the low-temperature cleaning of an InP surface with H is discussed.     

Macroscopic-wetting anisotropy on the line-patterned surface of fluoroalkylsilane monolayers

Micropatterned fluoroalkylsilane monolayer surfaces with liquidphilic/liquidphobic area (line width 1-20 microm) were prepared with few defects by vacuum ultraviolet (VUV) photolithography. The anisotropic wetting of a macroscopic droplet with a 0.5-5 mm diameter on the micropatterned surfaces was investigated. The strong anisotropy of the contact angle and the sliding angle and droplet distortion for fluoroalkylsilane/silanol patterned surfaces was attributed to the difference in the energy barrier of wetting between parallel and orthogonal lines. The wetting anisotropy decreased with decreases in the liquidphilic area. Fluoroalkylsilane/alkylsilane patterned surfaces with small differences in the surface free energies of the components showed anisotropic wetting only for the low-surface-tension liquids.     

Role of added Lewis base and alkylaluminum halide on living cationic polymerization of vinyl ether

In the living cationic polymerization of isobutyl vinyl ether (IBVE) by the CH₃CH (OiBu) OCOCH₃ ( 1 )/EtAlCl₂ initiating system in the presence of the added base in hexane at +40°C, the stability of the initiating system 1 /EtAlCl₂, which form initiating species CH₃CH^⊕ (OiBu) derived from 1 , was investigated. In the presence of the Lewis base such as ethyl acetate or 1,4-dioxane, the active species was stable for 300 min even at +40°C in the absence of IBVE, and the living polymers were quantitatively obtained by adding IBVE. However, the active species was partly consumed by side reactions during the standing time for 60 min in the presence of a less basic additive such as ethyl benzoate, and about 50% of the active species was deactivated in the presence of methyl chloroacetate. Consequently, in the case of a less basic additive such as methyl chloroacetate (which was effective for the fast living polymerization), it can be seen that the careful selection of polymerization conditions was required. The living polymerization rate was dependent on the second order of EtAlCl₂ concentration. EtAlCl₂ induced the cleavage of 1 into CH₃CH^⊕ (OiBu) and EtAl^?Cl₂(OCOCH₃), and the reactivity of CH₃CH^⊕ (OiBu) and propagating carbocation may be controlled by EtAl^?Cl₂(OCOCH₃) with the aid of other EtAlCl₂. Et_1.5AlCl_1.5 exists as a bimetallic complex of EtAlCl₂ and Et₂AlCl, and it is expected that the polymers having a bimodal molecular weight distribution will be obtained due to two kinds of counteranions coming from EtAlCl₂ and Et₂AlCl. However, in the cationic polymerization of IBVE by 1 /Et_1.5AlCl_1.5 in the presence of ethyl acetate, the living polymer exhibiting a unimodal and very narrow molecular weight distribution was obtained. Thereby, it was suggested that the counteranions, EtAl^?Cl₂(OCOCH₃) and Et₂Al^?Cl(OCOCH₃), exchange rapidly with each other. © 1994 John Wiley & Sons, Inc.     

Kinetics and thermodynamics of hexameric capsule formation

Resorcinarene 1b forms a hexameric assembly in water-saturated CDCl(3) that encapsulates one tetraalkylammonium salt (2(+)Br(-)). The remaining space is occupied by coencapsulated solvent molecules. A maximum of three and minimum of one CHCl(3) molecule were found inside of capsules with tetrapropyl- and tetraheptylammonium bromide, respectively. The encapsulation of the salt is endothermic and entropically favored by the liberation of the solvent molecules. The stabilities of the encapsulation complexes and the rates of guest exchange decrease for larger cations. The higher activation barriers for in/out exchange of the larger guests suggest tight conformational restraints in the transition state. It is likely that complete dissociation of one resorcinarene molecule is necessary for the exchange of the alkylammonium salts.     

Microchip capillary electrophoresis using on-line chemiluminescence detection

Chemiluminescence detection was used in capillary electrophoresis integrated on a microchip. Quartz microchips have two main channels and four reservoirs. Dansyl-lysine and -glycine were separated and detected with bis[(2-(3,6,9-trioxadecanyloxycarbony)-4-nitrophenyl]oxalate as peroxyoxalate chemiluminescent reagent. These dansyl amino acids came into contact with the chemiluminescence reagent to produce visible light at the interface between the separation channel and chemiluminescence reagent-containing reservoir. The detection limit (S/N = 3) for dansyl-lysine was 1 x 10(-5) M, which corresponded to the very small mass detection limit of ca. 0.4 fmol. However, the concentration sensitivity in the present system was approximately two orders of magnitude lower than that in the conventional capillary electrophoresis-chemiluminescence detection system. The relative standard deviations of migration time and peak height for dansyl-lysine were 4.2 and 4.5%, respectively. A channel conditioning before every run and an appropriate control of voltages were needed for the reproducible results. The present system had advantages in rapid separation time (within 40 s), small (several 10 pI) and accurate sample injection method using a cross-shaped injector, and simplification and miniaturization of the detection device.     

Nucleation kinetics of folded chain crystals of polyethylene on active centers

Kinetic equations describing formation of nuclei of a new phase on active centers from supercooled melt taking into account exhaustion of active centers are solved numerically. Basic characteristics of nucleation process (total number of nuclei and nucleation rate) of folded chain crystals of polyethylene at low supercooling are determined and compared with measured data. Our model gives good coincidence with experimental measurements of the total number density of nuclei. Nucleation rate reaches some quasistationary limit at sufficiently long time, which is approximately 20% of the stationary nucleation rate determined by the standard way.     

Imino ene reaction catalyzed by ytterbium(III) triflate and TMSCl or TMSOTf

A novel combined system of Yb(OTf)(3) with TMSCl or TMSOTf catalyzed an imino ene reaction. The reaction of N-tosylbenzaldimine (1) with alpha-methylstyrene (2) proceeded smoothly to give homoallylic amine 3 in the presence of a catalytic amount of Yb(OTf)(3) and TMSCl. This catalytic system was successfully applied to the imino ene reactions of various aldimines with alkenes. This new imino ene reaction provides a unique method for the three-component coupling reaction of an aldehyde, tosylamide, and alpha-methylstyrene in the presence of Yb(OTf)(3) and TMSOTf, to give the corresponding homoallylic amine.     

Biomolecular photodiode consisting of cytochrome c-adsorbed hetero-Langmuir–Blodgett films

Photoinduced electron transfer in biomolecular photodiode consisting of protein-adsorbed hetero-Langmuir–Blodgett (LB) films was investigated. Four kinds of functional molecules, cytochrome c, viologen, flavin, and ferrocene, were used as a second electron acceptor, a first electron acceptor, an electron sensitizer, and an electron donor, respectively. The hetero-LB film was fabricated by subsequently depositing ferrocene, flavin, and viologen onto the pretreated ITO glass. Cytochrome c-adsorbed hetero-LB films were prepared by soaking the hetero-LB films into the phosphate buffer solution containing cytochrome c. To verify the optimal adsorption conditions of cytochrome c molecules onto the viologen LB layers, the UV-absorption spectrum and atomic force microscopy observations of LB films were performed. Finally, the metal/insulator/metal structured molecular device was constructed by depositing aluminum onto the surface of the cytochrome c-adsorbed hetero-LB films. For photoelectric response properties, the current–voltage characteristic and photoswitching effect of the proposed molecular photodiode were investigated. To verify the charge shift, transient photocurrent of the molecular photodiode was measured.