Incorporating tritiated water into a 14C-sampling system for quantitative estimation of 14C activity in airborne effluent

The effects of incorporating tritiated water into a ¹⁴C-sampling system in sample preparation and ¹⁴C activity measurement by liquid scintillation counting were investigated. Experiments derived the limit of water content in the prepared sample, and also demonstrated that ¹⁴C activity can be determined without any interference from ³H contamination for a clear-sample solution. The results enabled us to estimate the permissible relative humidity of air required for accomplishing sample preparation and ¹⁴C activity measurement. These showed that for sampling of air with less than the permissible relative humidity, total ¹⁴C activity in airborne effluent can be evaluated accurately without dehumidification of air.The authors would like to thank T. Kozawa, K. Isaka and Y. Adachi of Inspection Development Company Ltd., Y. Hiyama of Zuihou Sangyou Company Ltd., and T. Mizutani, H. Watanabe, M. Takeishi and K. Shinohara of Japan Nuclear Cycle Development Institute for their valuable assistance.     

Kinetics of γ-ray polymerization of formaldehyde in the presence of carbon dioxide

A kinetic study of the γ-ray polymerization of formaldehyde in toluene solution in the presence of carbon dioxide was carried out at temperatures of + 13 to ?17°C. Two modes of the polymerization, spontaneous and γ-ray polymerization, occur in this system. The γ-ray polymerization, experimentally separated from the spontaneous polymerization, was investigated. The rate of γ-ray polymerization increased slightly with the square root of carbon dioxide concentration. The rate of polymerization was also found to be proportional to the dose rate and the square of monomer concentration. The molecular weight of polymer formed was independent of the reaction condition. The apparent activation energy was estimated to be 10.3 kcal./mole. The kinetics of the γ-ray polymerization in the presence of carbon dioxide are explained quantitatively by a cationic mechanism, and the role of carbon dioxide is as an action of retardation for neutralization of the cationic initiating species, which was produced by γ-radiation, by means of a reverse reaction with an electron. Physical and mechanical properties of the polymer obtained by γ-ray polymerization were also investigated.     

Semi-micro size-exclusion chromatography of polymers : Calibration of columns and comparison with conventional columns

Stainless-steel tubes having inside diameters of 1.5 mm and 1.8 mm were packed with polystyrene gels of particle diameter 10 ± 2 μm. Two 50 cm × 1.8 mm I.D. packed columns, connected in series, were calibrated and molecular-weight averages of polystyrene NBS 706 were measured, the results coinciding with the data of the National Bureau of Standards. The peak widths of polystyrenes of narrow molecular-weight distributions in both semi-micro column (four 25 cm × 1.5 mm I.D.) and conventional column (two 50 cm × 8 mm I.D.; packed by the manufacturer) systems were determined at different mobile-phase velocities, and the minimum peak width in the latter system was obtained at the velocity of 0.2 mm/sec, which was higher than that for the semi-micro system. The interstitial volume was higher and the inner volume was lower for the semi-micro column system (1.8 mm I.D.) than those for the conventional one, which means that semi-micro columns were packed less densely, resulting in a steep calibration curve. The peak height of a solute was proportional to the cell length of an ultraviolet detector if the sample load was proportional to the cross-sectional areas of columns having the same column efficiency. Although conventional size-exclusion chromatography has many advantages in respect of velocity, calibration curtve and sample peak height, semi-micro size-exclusion chromatography still holds some merits such as low consumption of gels and of mobile-phase solvents.     

Determination of traces of lead and copper in foods by electrothermal atomic absorption spectrometry with metal atomizer

Summary A method is described for the determination of traces of lead and copper in foods by a microcomputer-processed atomic absorption spectrometry with a molybdenum micro-tube atomizer. Accurate results of lead and copper are obtained by atomization in the presence of thiourea. Thiourea contributes to a highly reproducible atomization profile and reduction of interferences from concomitant elements in foods. Solid samples are digested with nitric acid in the Uni-seal decomposition vessel, while liquid or water-soluble samples are directly atomized.

---

Bestimmung von Blei- und Kupferspuren in Lebensmitteln durch elektrothermische AAS mit einem Metallzerstäuber

Zusammenfassung Ein Verfahren zur Bestimmung von Blei- und Kupferspuren in Lebensmitteln mittels mikrocomputer-gesteuerter AAS mit einem Zerstäuber aus Molybdän wurde beschrieben. Die Zerstäubung in Gegenwart von Thioharnstoff gibt genaue Resultate. Dieser führt zu einem gut reproduzierbaren Zerstäubungsprofil und setzt die Störung von Begleitelementen herab. Feste Proben werden mit Salpetersäure aufgeschlossen, flüssige oder wasserlösliche Proben werden unmittelbar eingesetzt.

     

Synthesis of end‐functionalized poly(methyl methacrylate) by ruthenium‐catalyzed living radical polymerization with functionalized initiators

A series of functionalized 2‐bromoisobutyrates and 2‐chloro‐2‐phenylacetates led to α‐end‐functionalized poly(methyl methacrylate)s in Ru(II)‐catalyzed living radical polymerization; the terminal functions included amine, hydroxyl, and amide. These initiators were effective in the presence of additives such as Al(Oi‐Pr)₃ and n‐Bu₃N. The chlorophenylacetate initiators especially coupled with the amine additive gave polymers with well‐controlled molecular weights (M_w/M_n = 1.2–1.3) and high end functionality (F_n ～ 1.0). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1937–1944, 2002     

Iron‐catalyzed living radical polymerization of acrylates: Iodide‐based initiating systems and block and random copolymerizations

A half‐metallocene iron iodide complex [Fe(Cp)I(CO)₂] induced living radical polymerization of methyl acrylate (MA) in conjunction with an iodide initiator [(CH₃)₂C(CO₂Et)I, 1 ] and Al(Oi‐Pr)₃ to give polymers of controlled molecular weights and narrow molecular weight distributions (MWDs) (M_w/M_n < 1.2). With the use of chloride and bromide initiators, the MWDs were broader, whereas the molecular weights were similarly controlled. Other acrylates such as n‐butyl acrylate (nBA) and tert‐butyl acrylate (tBA) can be polymerized with 1 /Fe(Cp)I(CO)₂ in the presence of Ti(Oi‐Pr)₄ and Al(Oi‐Pr)₃, respectively, to give living polymers. The 1 /Fe(Cp)I(CO)₂ initiating system is applicable for the synthesis of block and random copolymers of acrylates (MA, nBA, and tBA) and styrene of controlled molecular weights and narrow MWDs (M_w/M_n = 1.2–1.3). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2033–2043, 2002     

Cationic polymerization of formaldehyde in liquid carbon dioxide. Part I

A cationic polymerization of formaldehyde which gave a high molecular weight polymer was studied in liquid carbon dioxide at 20–50°C. In the polymerization without any catalyst both the rate of polymerization and the molecular weight of the resulting polymer increased rapidly with a decrease in the loading density of the monomer solution to the reaction vessel, and also increased with an increase in the initial monomer concentration. From these results it was concluded that the initiating species could be ascribed to an impurity contained in the monomer solution. Both the rate of polymerization and the degree of polymerization of the polymer also increased with rising temperature. The carboxylic acid added acted as a catalyst in the polymerization because of increase in the polymer yield, the molecular weight of polymer formed, and the number of moles of polymer chain with increasing dissociation constant of acid used. It was concluded that the polymerization in liquid carbon dioxide proceeded by a cationic mechanism. Methyl formate had no influence on the polymerization, but methanol and water acted as a chain-transfer agent.     

Isolation and structure determination of a new marine toxin,neosurugatoxin, from the Japanese Ivory Shell, Babylonia japonica.

A new toxin, named neosurugatoxin, was isolated from the toxic Japanese Ivory Shell and its structure was determined by X-ray crystallographic analysis.