Synthesis and spectroscopic analysis of tetraphenylporphyrinatoantimony(V) complexes linked to boron-dipyrrin chromophore on axial ligands

Tetraphenylporphyrinatoantimony(V) complexes, linked to boron-dipyrrin chromophores on axial ligands, were synthesized. The fluorescence spectra of 1a, 1b and 1c (3-[4-(N,N′-difluorobornyl-5-dipyrrinyl)phenyl]propoxo(methoxo)antimony(V) tetraphenylporphyrin bromide (1a); 6-[4-(N,N′-difluorobornyl-5-dipyrrinyl)phenyl]hexyloxo(methoxo)antimony(V) tetraphenylporphyrin bromide (1b); bis{3-[4-(N,N′-difluorobornyl-5-dipyrrinyl)phenyl]propoxo}antimony(V) tetraphenylporphyrin bromide (1c)) were analyzed under the excitations of N,N′-difluorobornyl-5-dipyrrinylphenyl (Bdpy) and tetraphenylporphyrinatoantimony(V) (Sb(TPP)) chromophores. Under the irradiation of Bdpy chromophore, the excitation energy was transferred from Bdpy chromophore to the Sb(TPP) moiety at 0.13–0.40 of the quantum yields, even in a polar solvent. On the other hand, the emission of Sb(TPP) chromophores was quenched by Bdpy chromophores at rate constants of 10⁸–10⁹ s⁻¹, independent of on the solvent polarity. Under the excitation of the Bdpy chromophore of 1d (3-[4-(N,N′-difluorobornyl-5-dipyrrinyl)phenyl]propoxo(phenyloxo)antimony(V) tetraphenylporphyrin bromide) involving both the Bdpy and the phenoxy chromophores on the axial ligands, the excited singlet state of the Sb(TPP) chromophore generated by the energy transfer from the Bdpy chromophore was quenched by the phenoxy ligand via non-radiative processes involving electron transfer. However, rapid back electron-transfer may occur because no absorption of the anion radical of Sb(TPP) was observed by nanosecond laser photolysis.     

Semi-micro size-exclusion chromatography of polymers : Calibration of columns and comparison with conventional columns

Stainless-steel tubes having inside diameters of 1.5 mm and 1.8 mm were packed with polystyrene gels of particle diameter 10 ± 2 μm. Two 50 cm × 1.8 mm I.D. packed columns, connected in series, were calibrated and molecular-weight averages of polystyrene NBS 706 were measured, the results coinciding with the data of the National Bureau of Standards. The peak widths of polystyrenes of narrow molecular-weight distributions in both semi-micro column (four 25 cm × 1.5 mm I.D.) and conventional column (two 50 cm × 8 mm I.D.; packed by the manufacturer) systems were determined at different mobile-phase velocities, and the minimum peak width in the latter system was obtained at the velocity of 0.2 mm/sec, which was higher than that for the semi-micro system. The interstitial volume was higher and the inner volume was lower for the semi-micro column system (1.8 mm I.D.) than those for the conventional one, which means that semi-micro columns were packed less densely, resulting in a steep calibration curve. The peak height of a solute was proportional to the cell length of an ultraviolet detector if the sample load was proportional to the cross-sectional areas of columns having the same column efficiency. Although conventional size-exclusion chromatography has many advantages in respect of velocity, calibration curtve and sample peak height, semi-micro size-exclusion chromatography still holds some merits such as low consumption of gels and of mobile-phase solvents.     

Determination of traces of lead and copper in foods by electrothermal atomic absorption spectrometry with metal atomizer

Summary A method is described for the determination of traces of lead and copper in foods by a microcomputer-processed atomic absorption spectrometry with a molybdenum micro-tube atomizer. Accurate results of lead and copper are obtained by atomization in the presence of thiourea. Thiourea contributes to a highly reproducible atomization profile and reduction of interferences from concomitant elements in foods. Solid samples are digested with nitric acid in the Uni-seal decomposition vessel, while liquid or water-soluble samples are directly atomized.

---

Bestimmung von Blei- und Kupferspuren in Lebensmitteln durch elektrothermische AAS mit einem Metallzerstäuber

Zusammenfassung Ein Verfahren zur Bestimmung von Blei- und Kupferspuren in Lebensmitteln mittels mikrocomputer-gesteuerter AAS mit einem Zerstäuber aus Molybdän wurde beschrieben. Die Zerstäubung in Gegenwart von Thioharnstoff gibt genaue Resultate. Dieser führt zu einem gut reproduzierbaren Zerstäubungsprofil und setzt die Störung von Begleitelementen herab. Feste Proben werden mit Salpetersäure aufgeschlossen, flüssige oder wasserlösliche Proben werden unmittelbar eingesetzt.

     

Geographical distribution of plutonium derived from the atomic bomb in the eastern area of Nagasaki

In order to know the distribution of plutonium derived from the Nagasaki atomic bomb, soil samples were measured to determine the ²⁴⁰Pu/²³⁹Pu isotope ratio of and concentrations of ^239+240Pu and ¹³⁷Cs. The ^239+240Pu concentrations in soils, except for Nishiyama area, were close to the average concentration of soil collected in Japan. In soils collected at the Nishiyama area and at the eastern area of Nagasaki Prefecture and at part of northern area in Kumamoto Prefecture, the ²⁴⁰Pu/²³⁹Pu ratios were lower than the global fallout values. This suggests that plutonium from the atomic bomb was deposited in the eastern area from the hypocenter reaching up to 100 km eastwards.     

Synthesis of end‐functionalized poly(methyl methacrylate) by ruthenium‐catalyzed living radical polymerization with functionalized initiators

A series of functionalized 2‐bromoisobutyrates and 2‐chloro‐2‐phenylacetates led to α‐end‐functionalized poly(methyl methacrylate)s in Ru(II)‐catalyzed living radical polymerization; the terminal functions included amine, hydroxyl, and amide. These initiators were effective in the presence of additives such as Al(Oi‐Pr)₃ and n‐Bu₃N. The chlorophenylacetate initiators especially coupled with the amine additive gave polymers with well‐controlled molecular weights (M_w/M_n = 1.2–1.3) and high end functionality (F_n ～ 1.0). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1937–1944, 2002     

Iron‐catalyzed living radical polymerization of acrylates: Iodide‐based initiating systems and block and random copolymerizations

A half‐metallocene iron iodide complex [Fe(Cp)I(CO)₂] induced living radical polymerization of methyl acrylate (MA) in conjunction with an iodide initiator [(CH₃)₂C(CO₂Et)I, 1 ] and Al(Oi‐Pr)₃ to give polymers of controlled molecular weights and narrow molecular weight distributions (MWDs) (M_w/M_n < 1.2). With the use of chloride and bromide initiators, the MWDs were broader, whereas the molecular weights were similarly controlled. Other acrylates such as n‐butyl acrylate (nBA) and tert‐butyl acrylate (tBA) can be polymerized with 1 /Fe(Cp)I(CO)₂ in the presence of Ti(Oi‐Pr)₄ and Al(Oi‐Pr)₃, respectively, to give living polymers. The 1 /Fe(Cp)I(CO)₂ initiating system is applicable for the synthesis of block and random copolymers of acrylates (MA, nBA, and tBA) and styrene of controlled molecular weights and narrow MWDs (M_w/M_n = 1.2–1.3). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2033–2043, 2002     

Ruthenium‐catalyzed fast living radical polymerization of methyl methacrylate: The R?Cl/Ru(Ind)Cl(PPh3)2/n‐Bu2NH initiating system

A fast living radical polymerization of methyl methacrylate (MMA) proceeded with the (MMA)₂? Cl/Ru(Ind)Cl(PPh₃)₂ initiating system in the presence of n‐Bu₂NH as an additive [where (MMA)₂? Cl is dimethyl 2‐chloro‐2,4,4‐trimethyl glutarate]. The polymerization reached 94% conversion in 5 h to give polymers with controlled number‐average molecular weights (M_n's) in direct proportion to the monomer conversion and narrow molecular weight distributions [MWDs; weight‐average molecular weight/number‐average molecular weight (M_w/M_n) ≤ 1.2]. A poly(methyl methacrylate) with a high molecular weight (M_n ～ 10⁵) and narrow MWD (M_w/M_n ≤ 1.2) was obtained with the system within 10 h. A similarly fast but slightly slower living radical polymerization was possible with n‐Bu₃N, whereas n‐BuNH₂ resulted in a very fast (93% conversion in 2.5 h) and uncontrolled polymerization. These added amines increased the catalytic activity through some interaction such as coordination to the ruthenium center. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 617–623, 2002; DOI 10.1002/pola.10148     

Anode Magnetron Enhanced DC Glow Discharge Processes for Plasma Surface Cleaning and Polymerization

The objective of this study was to examine some fundamental factors involved in the design and construction of the anode magnetron dc glow discharge processes as well as its performance in plasma cleaning and polymerization. Those advantages of anode magnetron include the capability of the magnetron to operate at low pressure, as well as decreasing the thickness of cathode dark space, i.e., the negative glow which contains a higher concentration of ions and active species was more closely to the cathode surface, which makes the plasma surface cleaning and polymerization an effective and uniform processes. The deposition rate at a given discharge power is increased by the presence of anode magnetrons, and is also much higher relative to rf and af. The refractive index of dc plasma film at a given polymer thickness (such as TMS, 70 nm, RI: 2.4) is higher than rf, af, and cascade arc plasma (RI: 1.6–1.7).     

Synthesis of end-functionalized polystyrenes with organosilicon end-capping reagents via living cationic polymerization

The end-functionalization of living polymers with bases (methanol, benzylamine, diethyl sodiomalonate, and sodium methoxide) and organosilicon compounds [X ? Si(CH₃)₃;X ? : CH₂?C(CH₃)COO? , CH₃COO? , CH₂?CHCH₂? , C₆H₅? ] was investigated in the living cationic polymerization of styrene initiated with the 1-phenylethyl chloride/SnCl₄/nBu₄NCl system in CH₂Cl₂ at ?15°C. The four bases and C₆H₅SiMe₃, independent of their structures, were apparently incapable of reacting with the living end and invariably led to polystyrenes with the ω-end chlorine [～ ～ ～ CH₂CH(Ph)Cl] originated from the initiating system. The number-average end-functionality (F?_n) of the chloride, determined by ¹H-NMR, was close to unity (F?_n > 0.9). The presence of chlorine in the polymer was also confirmed by elemental analysis. In contrast, the quenching by the trimethylsilyl compounds with X = methacryloxy, acetoxy, and allyl gave ω-end-functionalized polystyrenes with the corresponding terminal groups (X) for which the F?_n values were close to unity (F?_n > 0.9). The effects of the structure of silyl compounds on end-capping are also discussed. © 1994 John Wiley & Sons, Inc.